Knape And Vogt 28 Inch Drawer Slides For Soft-Close Control

Knape and Vogt 28 inch drawer slides in the 8455 Series give a full extension, 28 inch length movement so the drawer clears the cabinet front and exposes stored contents, which helps installers deliver maximum access in kitchens, shops, or office cabinetry. The 90-pound rated design supports substantial drawer loads, allowing these side mount drawer slides to serve in heavier-duty storage without over-stressing the hardware. An integrated soft-close mechanism with Force Management technology controls closing speed and pull-in, which reduces slamming and helps protect fronts, joinery, and contents over repeated cycles. The unhanded side mount construction lets the same slide work on either side, simplifying layout and reducing part sorting on site. Zinc construction provides a familiar finish that coordinates with common cabinet hardware setups. Ball-bearing action supports smooth travel, giving drawers a controlled, professional feel during use.

Key Working Details Of 8455FMP 28 Slides

• The 8455FMP 28 designation identifies these as Knape and Vogt 8455 Series slides in a 28 inch length, which helps match replacements or plan new casework layouts across multiple cabinet runs.
• Full extension travel allows the drawer box to move out to its full 28 inch length, which exposes the rear of the drawer for easier access when loading fasteners, tools, or bulk supplies.
• The 90-pound load rating supports heavier drawers, so installers can specify deeper, wider storage without overloading the slide system in typical woodworking and cabinetry environments.
• Integrated soft-close with Force Management technology moderates closing force, which reduces impact on drawer fronts and face frames and supports quieter operation in high-use areas.
• Three ball bearings per inch combined with polymer stop cushions support smooth, quiet movement, which gives a solid, controlled feel when opening and closing the drawer under load.
• The unhanded side mount design means one model works on both left and right sides, which simplifies inventory and speeds installation when outfitting multiple drawers in a project.

Mounting And Fit Details For Cabinet Installers

The specified 1/2 inch plus 1/32 inch minus 0 inch side clearance per side sets the gap required between the drawer box and cabinet, which gives installers a precise target when sizing drawer widths for smooth, non-binding travel. A 1-13/16 inch slide height defines the vertical space needed along the drawer side, helping align with drawer side heights and clearances around pulls or under shelves. Side mount, ball bearing construction lets the slide fasten along the drawer sides in typical cabinet carcasses, providing a familiar mounting approach for shop-built or onsite installations. The 28 inch overall length matches deeper cabinet depths, guiding casework layout when coordinating slide length with interior box dimensions.

Using 8455 Series Soft-Close Slides In Projects

Where These Side Mount Drawer Slides Fit Best

The side mount configuration and 28 inch length suit full-depth base cabinets, workshop stations, and storage banks where drawers need to extend fully for access. With a 90-pound load rating, the 8455FMP 28 slides handle drawers built for hardware bins, jigs, or stacked materials in woodworking or commercial millwork settings. The 1/2 inch plus 1/32 inch minus 0 inch side clearance spec ties directly into common cabinet construction standards, helping shop teams standardize drawer box widths across a run of cabinets while maintaining consistent operation. A 1-13/16 inch overall height works with many modern drawer designs, giving adequate bearing support without consuming excessive vertical space, which is useful when stacking multiple drawers in a base cabinet.

Full extension travel lets the drawer reach its 28 inch length outside the cabinet, so users can see and reach items at the very back, which is especially useful in deep base units and tool storage. Integrated soft-close with Force Management technology controls the last portion of travel, which is important in residential kitchens, offices, and shared workspaces where quiet closing is valued. The unhanded design simplifies planning for left and right drawers on islands, desks, or shop carts, reducing the chance of using mismatched components on different sides. Zinc construction and ball bearing movement pair with three ball bearings per inch and polymer stop cushions to support smooth action through repeated cycles, which matters when drawers see frequent daily use.

Common 8455FMP 28 Drawer Slide Questions

Selecting 8455FMP 28 Slides For Your Next Build

The 8455FMP 28 full extension soft-close drawer slides bring together a 28 inch length, 90-pound rating, and side mount ball bearing design so cabinetmakers can plan deeper, heavier drawers with predictable movement. With 1/2 inch plus 1/32 inch minus 0 inch side clearance and 1-13/16 inch height, these slides provide clear targets for drawer box sizing and layout during shop fabrication or onsite work. Integrated soft-close with Force Management technology and three ball bearings per inch support smooth, controlled operation that suits residential, commercial, or shop environments. For projects calling for Knape and Vogt 8455 Series performance in a 28 inch format, these slides align well with common cabinet dimensions and workflow demands.