Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Extensity pull 128mm identifies this cabinet handle as a 5-1/16 in (128 mm) center-to-center pull, so hole spacing lines up with standard drill patterns on many cabinetry layouts. The zinc die-cast material gives a solid metal feel during use, supporting frequent door and drawer operation in busy spaces. An antique silver finish presents a muted metallic tone, which helps this pull blend into traditional or transitional cabinet designs without drawing harsh reflections under lighting. The overall 6-1/4 in length offers enough grab area for a full hand, which helps when opening wider or heavier fronts. A projection of 1-7/16 in creates clearance between knuckles and the cabinet face, supporting comfortable gripping and reducing contact with finished surfaces. The 11/16 in width keeps the pull visually slim while still providing a defined edge for fingers, which matters on tight drawer faces or narrow rails.
The 5-1/16 in (128 mm) center-to-center measurement on this Amerock BP29393AS pull defines the distance between mounting points, which is critical when matching existing drilled holes on cabinet doors or drawers. With a 6-1/4 in overall length, the pull extends slightly beyond the hole spread, providing visual balance across rail widths on typical kitchen or bath cabinetry. The 1-7/16 in projection identifies how far the pull stands off the face, which influences hand clearance and how far hardware projects into walk paths along cabinet runs. At 11/16 in width, the pull fits well on face frames and frameless fronts without crowding narrow stiles, helping maintain consistent reveal lines. These measurements together guide layout decisions when planning new drilling patterns or aligning multiple pulls across banks of doors and drawers.
The Extensity collection designation groups this Amerock cabinet pull into a coordinated series, which helps when matching hardware style across kitchens, baths, and built-ins using the same family. The 5-1/16 in (128 mm) center-to-center size aligns with a widely used hole spacing, making this pull suitable for many residential cabinet door and drawer applications built around that standard. Its 6-1/4 in overall length spans a useful section of the front, which suits medium-width drawers and doors where a small knob would feel undersized. The antique silver finish supports use in spaces calling for a time-worn metal look, such as traditional kitchens or furniture-style vanities. With a projection of 1-7/16 in, this pull works on full-overlay and inset faces where hand clearance is needed but excessive protrusion could catch clothing in tight walkways.
The Amerock Extensity pull 128mm center-to-center dimension provides a fixed drilling reference, which helps installers produce straight, repeatable hole patterns with jigs or templates. The zinc die-cast material delivers a uniform casting, supporting consistent alignment of multiple pulls so faces read evenly along a run. The 11/16 in width keeps the hardware footprint controlled, which matters when maintaining equal margins from stile edges or drawer sides across stacked fronts. Its antique silver finish offers a consistent tone from piece to piece within the same batch, helping projects maintain a unified appearance along long cabinet banks. The 1-7/16 in projection sets a dependable stand-off from the face, allowing layout planning around how far hardware will extend relative to adjacent doors, trim, or appliances. These repeatable dimensions and materials support efficient installation and visually consistent results across a full room of cabinetry.
The Amerock BP29393AS pull has a 5-1/16 in (128 mm) center-to-center, 6-1/4 in overall length, 1-7/16 in projection, and 11/16 in width, which together define layout and hand clearance.
The Amerock Extensity cabinet pull is zinc die-cast, giving it a solid metal feel and supporting consistent casting for aligned installs across multiple doors and drawers.
This 5-1/16 in center-to-center pull has an antique silver finish, which provides a softer, aged metallic look suited to traditional or transitional cabinet designs.
The 1-7/16 in projection holds the pull off the cabinet face, giving fingers space to wrap the handle comfortably and helping limit contact with finished surfaces.
The 128 mm center-to-center measurement sets the mounting hole spacing, which is important when matching existing drilling or using templates for precise alignment.
The BP29393AS cabinet pull is part of the Extensity collection, allowing coordination of matching pulls across cabinets that share the same hardware family.
This Amerock Extensity cabinet pull combines a 5-1/16 in (128 mm) center-to-center size with a 6-1/4 in overall length, giving a practical balance between grip area and cabinet face coverage. The zinc die-cast construction and antique silver finish support projects that need a metal pull with a softer, aged appearance. With a 1-7/16 in projection and 11/16 in width, the pull offers functional hand clearance while staying proportional on typical door and drawer fronts. For cabinet runs built around 128 mm spacing and a traditional-leaning look, this Extensity BP29393AS pull provides defined dimensions that align layout planning with finished visual results.
Sold In: 1 Each
