Pro Value Steel Pull 15-1/8" (384 mm) Center to Center, Stainless Steel, STBAR384-SS

Pro Value Steel Series Pull For Cabinets

Pro Value Steel Series pull provides a 15-1/8 inch (384 mm) center to center mounting layout that spans wider drawer fronts or doors, which helps visually balance larger cabinet faces and supports a comfortable two-point grip for daily use. The steel material creates a solid-feeling handle that responds well to frequent opening and closing in busy kitchen, bath, or shop applications. A stainless steel finish gives the pull a neutral, clean look that pairs with many hinge and appliance finishes, so it works across mixed hardware jobs without visual conflict. The bar measures 18-1/4 inches in overall length, which leaves an extended hand area beyond the mounting points for easier grasping on tall pantry doors and wide drawers. A 1-5/16 inch projection sets the pull out from the cabinet face, creating finger clearance that helps when users have larger hands or when doors sit near adjacent walls or trim.

Key Steel Bar Pull Details For Projects

• The 15-1/8 inch (384 mm) center to center dimension defines drill spacing, which lets installers layout holes accurately on wider cabinet fronts and maintain consistent alignment across banks of doors and drawers.
• The 18-1/4 inch overall length means the pull extends beyond the mounting points, which provides more grip surface for users and supports stable opening on heavier or wider fronts.
• The 1-5/16 inch projection keeps the handle off the face of the cabinet, which allows fingers to wrap behind the bar comfortably and reduces contact marks on finished door and drawer surfaces.
• The 1/2 inch width gives the bar a slim profile, which fits well on modern cabinet designs and offers a defined edge for a firm grasp without feeling bulky on narrower fronts.
• The stainless steel finish delivers a straightforward metallic appearance, which blends with typical stainless appliances and fixtures so hardware lines stay consistent throughout the room.
• The steel construction provides a rigid bar structure, which supports repeated pulling forces over time and contributes to a solid feel when opening and closing cabinets.

Mounting Dimensions And Fit For This Pull

This bar pull is specified with a 15-1/8 inch (384 mm) center to center distance between mounting points, which establishes the exact hole spacing for cabinet doors or drawer fronts and helps maintain straight, level runs of hardware. With an overall length of 18-1/4 inches, the handle reaches further across the face, which assists with leverage on wider or taller panels. A 1-5/16 inch projection defines how far the bar stands off the surface, which allows space for fingers while still keeping the pull close enough to minimize snag risk. The 1/2 inch width balances a slim visual line with enough surface area to feel secure in the hand during operation.

Using The STBAR384-SS Pull In Real Projects

Where This 384 mm Center To Center Pull Fits

The STBAR384-SS bar pull with its 384 mm center to center layout suits cabinets and casework that benefit from a longer handle span, such as wide kitchen drawers or tall wardrobe and pantry doors, because the extended spacing matches the scale of larger fronts. On these applications, the 18-1/4 inch overall length lets the pull cover more of the panel width, which visually anchors the hardware and gives users multiple comfortable hand positions across the bar. The 1-5/16 inch projection also helps on doors near adjacent cabinets or appliances, because the stand-off distance provides room for fingers without requiring deep protrusions into walking space. A 1/2 inch width keeps the pull visually light, matching streamlined or contemporary cabinet styles while still being easy to grasp.

Why These Bar Pull Details Support Consistent Results

The defined 15-1/8 inch (384 mm) center to center measurement allows installers to repeat the same drill spacing across a full run of cabinetry, which helps keep hardware lines straight and uniform from cabinet to cabinet. That consistency reduces layout rework, because the installer can rely on a single template or measurement for every matching door or drawer using this pull. The 18-1/4 inch overall length works with the long center spacing to distribute pulling force over a wider area of the panel, which can feel smoother when operating heavy drawers or tall doors. The 1-5/16 inch projection sets a predictable clearance off the face, so planning around nearby edges, trim, or appliance handles is straightforward. The combination of steel material and stainless steel finish gives the handle a sturdy, metal feel and a neutral appearance, supporting repeatable results when matching this pull to other exposed hardware elements in the same space.

Common Questions About This Stainless Steel Pull

Selecting This 384 mm Pull For Your Project

The 384 mm center to center layout, 18-1/4 inch overall length, and 1-5/16 inch projection make this Pro Value Steel Series bar pull a practical match for wider cabinet doors and drawers that benefit from a longer, comfortable grip. Steel construction with a stainless steel finish delivers a straightforward metal look that works alongside typical hinges, drawer slides, and appliances used on professional woodworking and cabinet jobs. For projects calling for a 15-1/8 inch center to center handle in a slim 1/2 inch bar profile, this STBAR384-SS pull offers the defined dimensions needed to plan consistent layouts across a full run of cabinets.