Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top BLUMOTION blind corner hinge hangs inset doors at 95 degrees on cabinets positioned at a blind corner, with integrated soft-close, on both face-frame and frameless cabinets.
A blind corner cabinet sits adjacent to another cabinet, and the door cannot swing past 95 degrees without striking the neighboring unit. That restriction is built into this hinge by design, not a shortcoming. The full crank arm carries inset geometry, so the door sits flush inside the opening rather than over it. The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted on the cabinet, sold separately. Pair it with the matching Blum plate for your cabinet construction. The 45mm boring pattern matches the standard cup spacing used across most frameless and face-frame casework.
The hinge is plated steel in a nickel finish. On an inset door, where the reveal is tight on all four edges, soft-close does real work. BLUMOTION slows the door through the last few degrees so it does not make forceful contact with the opening every time it closes, protecting both the finish and the fit. The nickel finish holds up in the install and sits comfortably alongside satin nickel or brushed nickel pulls and hardware elsewhere in the room.
This hinge suits cabinetmakers and contractors working on frameless or face-frame cabinets where a blind corner layout calls for an inset door. It fits both cabinet types, so it covers shops building European box construction and those working with traditional face-frame boxes. The screw-on mount is the conventional fastening choice when the cabinet does not have pre-drilled 5mm system holes, or when a direct screw connection is simply the preferred approach. If the project uses the 32mm system with pre-drilled holes, a Blum INSERTA plate version offers tool-free plate mounting instead. For doors outside the standard 16 to 22mm thickness range, check the door-thickness spec before ordering.
The 95 degree limit is intentional for blind corner applications. It prevents the door from swinging into the adjacent cabinet. That restricted angle is what makes this hinge the right fit for the corner, not a standard overlay hinge.
Yes. The hinge arm connects to a base plate that mounts to the cabinet, and that plate is sold separately. Use a matching Blum plate for your cabinet type. Plates are brand-specific, so Blum plates only.
Inset means the door sits flush inside the cabinet opening, framed by a small even gap on all sides. Overlay means the door covers part or all of the cabinet side. This hinge is inset. If your door overlays the cabinet, choose a blind corner hinge in the overlay configuration instead.
Screw-on mounting drives wood screws directly into the cabinet and works on any construction. On 32mm system cabinets with pre-drilled 5mm holes, the INSERTA plate version of this hinge lets the plate press in without screws. Both work; the choice depends on cabinet prep and installer preference.
Specify this hinge when a blind corner layout calls for inset doors that close cleanly, hold their reveal, and settle without a slam.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP79B9580 Mfr# 79B9580 | Blum CLIP top 95 ° Inset Blind Corner Hinge Soft-Closing Dowel Mount 79B9580 | ||||
Sold in: 1 Each |  BP79B9590 Mfr# 79B9590 | Blum CLIP top 95 ° Inset Blind Corner Hinge Soft-Closing Inserta 79B9590 |