Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top blind corner hinge seats inset doors on both frameless and face-frame cabinets adjacent to a corner, with BLUMOTION soft-close built in and a dowel cup for press-in installation.
A blind corner cabinet sits at a 90 degree intersection where one door would strike the adjacent cabinet if it swung freely. The 95 degree opening angle on this hinge is not a restriction — it is the engineered limit that stops the door at the point where it clears the neighboring box cleanly. Inset geometry adds another layer of precision: the door sits inside the cabinet opening rather than over it, so the gap between door and frame must be consistent on every edge. These two requirements together define the spec, and this hinge is built to meet both at once.
The hinge body is steel with a nickel finish, a neutral tone that pairs with stainless hardware, brushed pulls, and natural wood interiors without competing for attention. Because inset cabinetry relies on tight tolerances, the three-way adjustment matters in practice: the height and side cams each move the door plus or minus 2mm, and depth adjusts plus 3mm or minus 2mm, giving enough range to bring an inset door to a flush, even reveal even if the cabinet or door shifted slightly during the build.
Reach for this hinge when a blind corner cabinet calls for inset doors and a quiet close. It suits kitchen and bath remodels where the corner layout is fixed and the door must stop before it hits the adjacent box, as well as furniture and built-in work where the flush inset look is the design goal. Both frameless and face-frame boxes are in scope. The dowel cup fits CNC-bored production environments where dowel holes are pre-drilled and cup screws are skipped for speed. For corner cabinets with overlay doors instead of inset, a different overlay configuration is the right pick.
The 95 degree limit is intentional. It stops the inset door at the angle where it clears the adjacent corner cabinet without contact. Wider swing would cause the door to strike the neighboring box.
Yes. This hinge clips to a Blum base plate that mounts to the cabinet, and the plate is sold separately. Use a plate from the Blum CLIP top range matched to your cabinet construction — frameless wing plate or face-frame plate as the box requires. Plates from other brands will not connect to this hinge.
The cup carries pre-attached dowels that press into bored dowel holes in the door rather than using cup screws. It is a common setup in CNC and production shops where doors are pre-bored. If your doors are bored for cup screws instead, use the screw-on cup version of this hinge.
Blind corner hinges are typically handed because the direction of swing determines which side the door clears. Confirm the hand required for your corner orientation before ordering.
This hinge handles the geometry that blind corners demand — a door held at the right angle, flush in its opening, closing with no slam — in a finish that works with the hardware around it.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP79B9550 Mfr# 79B9550 | Blum CLIP top 95 ° Inset Blind Corner Hinge Soft-Closing Screw-On 79B9550 | ||||
Sold in: 1 Each |  BP79B9590 Mfr# 79B9590 | Blum CLIP top 95 ° Inset Blind Corner Hinge Soft-Closing Inserta 79B9590 |
