Rolling door horseshoe hardware kit defines this Quiet Glide set as a dedicated rolling barn-style door hardware solution in satin nickel, built around a 6 foot rail and matched components to run a single interior door. The 6 x 1 rail establishes the track length and profile, giving you a fixed straight run suited to typical single-door openings where a continuous top track is required. The satin nickel finish on the hardware creates a consistent appearance across the rail, stops, brackets, and guide, which matters when the door hardware is fully exposed in finished spaces. The kit-level design under manufacturer part number QG.1300.HS.02 groups the rail, hanging brackets, stops, stop kit, center guide, and fasteners into one matched system, so every piece is sized to work with the others. The Quiet Glide brand focus on rolling door hardware means the components are specified for door movement rather than generic hanging applications.
The 6 foot QG400602 rail gives a single continuous track length to plan your door layout around, which helps determine header blocking locations and where the hanging brackets will sit over the door width. With hardware accommodating a door up to 2-1/4 inches thick, the system is set up for many typical interior door builds, which can simplify door sourcing when you already work within that thickness range. The dedicated center guide QG1301DG02 controls the bottom of the door, so the install uses a defined channel of guidance instead of leaving the slab to float at the floor. Using two rolling hanging brackets QG1304HS02 creates a standard two-point suspension, which distributes load along the rail and yields a predictable pivot spacing that installers can lay out repeatedly across jobs.
This Quiet Glide rolling door horseshoe hardware kit is built around a 6 x 1 rail, making it a strong fit wherever a straight 6 foot rolling run is appropriate above an opening. In many interior situations, that rail length works with a door sized to cover a standard passage plus trim, giving you clear coverage when the door is closed and a full clear opening when it is rolled open. The QG20102 rollers rated to accommodate a door up to 2-1/4 inches thick align well with common interior door thicknesses, so shop-built or prehung slabs in that range can be adapted to a rolling configuration without altering their core structure. Because the satin nickel finish is consistent across the rail, brackets, and other visible parts, this kit suits finished residential or light commercial interiors where exposed hardware becomes part of the visual design rather than something concealed. The rolling hanging brackets QG1304HS02 and the center guide QG1301DG02 together create a defined suspension and guidance path, which supports installations where the door is expected to cycle frequently across the opening.
The manufacturer part number QG.1300.HS.02 identifies this as a specific collection of coordinated components, which supports repeatable installs because every piece - rail, rollers, stops, brackets, and center guide - has known relationships in spacing and function. The QG4002 stop kit and the additional QG1305DS02 stops cooperate along the rail to define end-of-travel points, so once these are positioned, doors stop in the same place every time rather than drifting beyond the desired limit. Having the QG20102 rollers designed for doors up to 2-1/4 inches thick means the hanger geometry is intended for that depth, supporting consistent reveal and clearance targets when you mount similar slabs from project to project. The center guide QG1301DG02 controls the lower edge of the door, which stabilizes the leaf as it moves and helps keep the leading edge tracking parallel to the wall or casing instead of yawing. All fasteners being part of the kit ties drill points and fastening patterns directly to the rail and brackets supplied under Quiet Glide specifications, which promotes consistent alignment and attachment behavior across multiple installs.
This Quiet Glide rolling door horseshoe hardware kit uses QG20102 rollers that accommodate a door up to 2-1/4 inches thick, allowing use with many common interior door builds in that size range.
The kit centers on the QG400602 rail, which is specified as 6 x 1, giving you a 6 foot straight track to span and cover a typical single-door opening with sliding travel.
The QG1301DG02 center guide manages the bottom edge of the door so it stays aligned, reducing side-to-side swing and helping the slab track straight along the wall during operation.
The QG4002 stop kit and QG1305DS02 stops position on the rail to limit travel, letting you define where the door rests and preventing it from sliding past the planned end points.
Part number QG.1300.HS.02 refers to this specific Quiet Glide rolling door horseshoe hardware kit in satin nickel, grouping the 6 foot rail, rollers, stops, hanging brackets, center guide, and fasteners.
The satin nickel finish on this Quiet Glide kit keeps all visible hardware components visually consistent, which suits interior projects where the rolling door hardware is part of the room design.
This Quiet Glide 6 foot rolling door horseshoe hardware kit in satin nickel brings the rail, hanging brackets, rollers, stops, center guide, and fasteners together under one matched part number, so you can plan around a defined 6 x 1 rail and door thickness up to 2-1/4 inches. For projects calling for a single straight-run rolling barn-style door with exposed hardware, choosing this QG.1300.HS.02 system lets you work with components designed to function as one assembly from header to floor guide.