rolling door horseshoe hardware kit delivers a Quiet Glide rolling barn door hardware solution built around a coordinated 6 foot rail and hanger system, so installers get a matched set for a single rolling door run. The Quiet Glide brand and QG.1300.HS.07 part number define this as a specific 6 Foot Rolling Door Hardware Kit in oil rubbed bronze, giving jobs a consistent look wherever this finish is specified. The kit uses a QG400602 6 x 1 inch rail to support the rolling action along a straight track length, which matters when laying out header framing or blocking. A QG4002 stop kit manages end-of-travel, helping position the door consistently at each end of the opening. Five QG20102 components accommodate a door up to 2-1/4 inches thick, which sets the design envelope for door fabrication and edge detailing. A QG1301DG02 center guide provides a defined path at the base of the door, helping control lateral movement along the opening. Two QG1305DS02 stops and two QG1304HS02 rolling hanging brackets coordinate with the rail, giving the rolling barn door hardware a matched set of primary rolling points.
This Quiet Glide rolling barn door hardware kit centers around a 6 foot QG400602 6 x 1 inch rail, which gives installers a fixed span to align with the opening and any adjacent wall space. The QG4002 stop kit works at the rail ends, turning the rail length into a defined travel range for the mounted door. Five QG20102 parts accommodate a door up to 2-1/4 inches thick, so the mounting plan can account for door thickness when setting clearances from the wall or casing. The QG1301DG02 center guide manages the lower edge of the door path, which supports smoother rolling by reducing lateral play. Two QG1305DS02 stops and two QG1304HS02 rolling hanging brackets interface between the rail and door, which lets installers place the hangers so the door weight is carried along the full 6 foot rail.
The QG.1300.HS.07 rolling door horseshoe hardware kit from Quiet Glide is built as a rolling barn door hardware solution in oil rubbed bronze, which suits projects calling for that specific finish and style. With a QG400602 6 x 1 inch rail, the kit supports rolling movement along a 6 foot track, fitting openings where that span covers the door width and stacking space. Five QG20102 parts accommodate a door up to 2-1/4 inches thick, making the kit suitable for doors built within that thickness envelope on interior projects. The QG1301DG02 center guide supports door alignment along the lower edge, which is useful where a guided path is needed to keep the slab tracking true. Two QG1305DS02 stops and two QG1304HS02 rolling hanging brackets give the system defined rolling and stopping points, which helps align the door over the opening.
The Quiet Glide QG400602 6 x 1 inch rail establishes a consistent mounting component, which helps installers repeat bracket spacing and stop positions across similar openings. The QG4002 stop kit turns that rail into a controlled travel zone, so door open and closed positions can be repeated from job to job where the same layout is used. Five QG20102 pieces accommodating door thickness up to 2-1/4 inches give a clear design limit, which simplifies coordination with millwork drawings and door shop standards. The QG1301DG02 center guide contributes to smoother sliding by managing the door path, helping reduce rubbing or contact with nearby trim. Two QG1305DS02 stops set physical boundaries that can align with casing or wall features, while two QG1304HS02 rolling hanging brackets focus movement at defined suspension points, supporting predictable rolling behavior throughout the door travel.
The rolling door horseshoe hardware kit uses five QG20102 components that accommodate a door up to 2-1/4 inches thick, which guides door construction and layering choices.
The Quiet Glide QG.1300.HS.07 kit uses a QG400602 rail that is 6 x 1 inches, providing a 6 foot track length for planning the rolling door travel.
The QG4002 stop kit works with the rail to define end-of-travel points, which positions the door consistently at the open and closed locations.
The QG1301DG02 center guide controls the door path along its lower edge, which limits side-to-side movement and keeps the door tracking along the opening.
The QG1304HS02 rolling hanging brackets connect the door to the rail, concentrating the rolling action at defined suspension points for controlled movement.
The QG1305DS02 stops set physical limits along the rail, which helps align the door edges with the opening or trim when fully open or closed.
The Quiet Glide QG.1300.HS.07 rolling door horseshoe hardware kit pairs an oil rubbed bronze finish with a 6 foot QG400602 6 x 1 inch rail, which supports projects needing that span and appearance. Five QG20102 components accommodating door thickness up to 2-1/4 inches define the door build parameters, while the QG4002 stop kit, QG1301DG02 center guide, two QG1305DS02 stops, and two QG1304HS02 rolling hanging brackets work together as a coordinated rolling barn door hardware system for installers aligning a single sliding door to an opening.