
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Tiomos wing base plates are hinge mounting plates from Grass America that provide a 2mm height reference for Tiomos hinge layouts. This fixed 2mm height sets a consistent starting point at every hinge location, which matters when you want cabinet doors to line up evenly across a run. The wing plate design supports 4 point fixing, so the plate anchors in four locations on the cabinet. That four-point contact spreads loads across the mounting area, which matters when doors are opened repeatedly in daily use. The plate is made from steel, giving a solid mounting surface for the hinge arm under normal cabinet conditions. A nickel-plated finish is applied to the steel, which provides a clean metal surface that visually matches common hinge finishes and helps resist surface wear wherever the plate is exposed.
This Tiomos wing base plate uses 4 point fixing, so installers fasten the plate at four contact locations on the cabinet surface. That arrangement supports a firm hinge anchor, which matters when fine-tuning door alignment. Height adjustment via worm gear is built into the plate, allowing the hinge position to move up or down relative to the 2mm base height. This worm gear mechanism helps dial in door reveals with controlled movement instead of large shifts. The plate is designed for Euro screws, aligning with European style cabinet construction where pre-drilled patterns are common. Because the plate is steel and nickel-plated, it provides a stable metal platform that works well with Grass America hinge systems in typical cabinet environments.
This Tiomos wing base plate from Grass America functions as a hinge mounting plate in cabinet assemblies that use Euro screws. The 2mm height defines the vertical reference level between the cabinet side and the hinge arm, which matters when matching door positions across multiple cabinets or panels. The 4 point fixing pattern helps the plate sit firmly on the cabinet surface, so the hinge connection resists movement when doors are opened and closed. Because the plate is part of the Tiomos system and sits in the hinge stack between the cabinet and hinge arm, it plays a central role wherever precise door alignment is required in cabinetry built around that hardware family.
The height adjustment via worm gear on this wing base plate gives installers a controlled way to shift the hinge position vertically after the plate is fixed. That means the 2mm nominal height sets the base, and the worm gear fine-tunes the final door location relative to the cabinet. This style of adjustment helps achieve consistent reveals without repeatedly loosening primary mounting points. The steel construction, combined with a nickel-plated finish, provides a rigid interface between cabinet and hinge arm that maintains the set position under normal use. The 4 point fixing pattern supports the worm gear adjustment by holding the plate stable, so small movements made through the gear remain accurate. Together, these details help shops repeat setups across cabinets that rely on Tiomos wing base plates and Euro screw mounting.
This Tiomos wing base plate is a hinge mounting plate in the Grass America line, so it serves as the mounting interface between the cabinet and a compatible hinge arm in a Tiomos system.
The 2mm height establishes a fixed reference between cabinet side and hinge arm, which supports consistent door positioning when multiple hinges share the same drilling layout.
The 4 point fixing layout anchors the plate at four locations on the cabinet, which helps keep the hinge mounting stable during door operation and when adjustments are made.
The worm gear height adjustment lets the hinge position move up or down in small increments while the plate stays fixed, which supports precise door reveal tuning.
This base plate is specified for Euro screws so it aligns with European style cabinet construction and standard drilling patterns used in many cabinet shops.
This hinge mounting plate is made from steel with a nickel-plated finish, providing a rigid mounting surface and a metal appearance that matches common hinge finishes.
The Tiomos wing base plates for Euro screws with 2mm height from Grass America combine 4 point fixing, worm gear height adjustment, and a steel, nickel-plated body in one hinge mounting component. Those characteristics support repeatable cabinet door alignment wherever a Tiomos hinge layout is planned. For projects using Euro screw construction and looking for a 2mm reference height in the hinge stack, this plate aligns with that requirement and fits into cabinet workflows built around Grass America hinge systems.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GFF058139759228 Mfr# F058139759228 | Tiomos Wing Mounting Plate with Pre-Mounted Euro Screws, 4-Point Fixing, Nickel-Plated, Screw-On, 3.5mm |