Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Tiomos wing mounting plate with pre-mounted Euro screws, 4-point fixing, nickel-plated, screw-on, 3.5mm, gives installers a dedicated Grass America solution for mounting Tiomos hinges on cabinet cases. The 3.5mm mounting plate height establishes a consistent starting position between door and cabinet, which supports repeatable reveals across a run of doors. The steel construction provides a solid base under the hinge arm, which supports stable door movement under normal cabinet use. The nickel-plated finish on the plate offers a clean, uniform metal surface that coordinates with modern cabinet hardware lines. Pre-mounted Euro screws in the plate allow direct screw-on installation into prepared system holes, helping streamline hinge mounting on cabinet sides. The 4-point fixing layout provides four fastening points between plate and cabinet, which distributes load across the mounting area for a secure hinge foundation. Height adjustment via worm gear on the plate lets the installer fine-tune door position after installation, which simplifies aligning doors in all standard cabinet runs.
This Tiomos wing mounting plate with pre-mounted Euro screws is designed as a screw-on solution, so it mounts directly to the cabinet using the existing Euro-style screw pattern. The 4-point fixing arrangement means four screw positions engage the cabinet side, building a rigid base for the hinge arm. With the plate height specified at 3.5mm, installers can plan hinge cup drilling and cabinet layout around a known mounting reference. Height adjustment via worm gear is built into the plate, allowing vertical movement of the hinge interface while the plate remains fixed to the cabinet. That worm gear adjustment lets the user dial doors up or down incrementally, which is particularly useful when lining up multiple doors across a bank of cabinets. The nickel-plated steel plate also resists wear at the adjustment mechanism, supporting repeatable fine-tuning when cabinets are installed or serviced.
This Tiomos wing mounting plate with pre-mounted Euro screws, steel, nickel-plated, is suited for cabinet work where Tiomos hinges from Grass America are specified and Euro-style construction is used. The wing style plate spreads its footprint across the cabinet side, giving more surface area around the hinge location, which is helpful on frameless cabinet designs. With a defined 3.5mm height, the plate fits layouts that call for this specific mounting dimension, letting designers and installers coordinate drilling patterns and reveals around that value. The 4-point fixing pattern supports applications where doors see frequent use, because the load is carried by four mounting points instead of fewer fasteners. In shop production or on job sites using system drilling for Euro screws, the pre-mounted Euro screws in the plate tie directly into those prepared holes. That integration allows the mounting plate to function as the interface between the cabinet case and the Tiomos hinge arm, forming a consistent hinge base across a project.
The 3.5mm Tiomos wing mounting plate height defines the spacing between cabinet side and hinge arm, which locks in a predictable geometry for overlay and gap settings. Because that height is built into the plate rather than improvised during installation, the geometry stays uniform as plates are repeated from cabinet to cabinet. The height adjustment via worm gear then adds controlled vertical movement on top of that fixed base, so final door position can be brought into line without moving the plate itself. The worm gear mechanism uses a threaded adjustment, which allows small, repeatable changes without slippage during normal hinge operation. Combined with the 4-point fixing layout, this arrangement lets installers adjust door height while the plate remains firmly anchored by four Euro screws. The steel, nickel-plated construction keeps the worm gear and mounting contact surfaces stable over time, which supports ongoing reliability of those adjustments in everyday cabinet use. For production environments, these combined features help reduce rework, because the same plate, screws, and adjustment process can be repeated with predictable outcomes.
The Tiomos wing mounting plate is a hinge mounting plate from Grass America, so it serves as the fixed base that connects Tiomos hinges to the cabinet side.
The 3.5mm plate height sets the hinge arm off the cabinet by a defined distance, helping installers plan drilling and overlays for consistent door alignment.
The 4-point fixing uses four screw positions to secure the plate, spreading hinge and door loads across more of the cabinet side for a solid mount.
The height adjustment via worm gear lets the hinge position move vertically in small increments, allowing precise door alignment without relocating the mounting plate.
The steel, nickel-plated construction provides a rigid and corrosion-resistant surface, supporting smooth hinge function and a clean appearance inside cabinets.
The pre-mounted Euro screws let the plate fasten directly into Euro-style system holes, streamlining mounting on cabinet sides drilled for this pattern.
The Tiomos wing mounting plate with pre-mounted Euro screws, 4-point fixing, steel, nickel-plated, 3.5mm, is built as a Grass America hinge mounting solution for Tiomos systems. Its worm gear height adjustment, defined plate height, and screw-on Euro design support accurate, repeatable door alignment on cabinet runs. For cabinet shops and installers using Tiomos hinges with Euro-style drilling, this mounting plate delivers a matching interface between case and hinge arm. Use this plate whenever a 3.5mm Tiomos mounting reference and 4-point fixing pattern fit the cabinet layout.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFF058139757228 Mfr# F058139757217 | Tiomos Wing Base Plates For Euro Screws 2mm Height |
