Tiomos Wing Mounting Plate For Precise Hinge Setup

Tiomos wing mounting plate gives you a dedicated hinge mounting plates solution when you are working with Grass America hinge layouts and need secure, repeatable results. This hinge mounting plates component is built as a 0mm wing plate, so it positions the hinge cup relative to the cabinet panel without adding height, which helps maintain the intended reveal and overlay in standard Tiomos applications. The plate is designed as a screw-on style for use with wood screws, so it fastens directly to cabinet carcases or frames made from wood-based materials. The nickel-plated finish on the steel body provides a hard metal surface at the hinge interface, which supports long-term mechanical contact between hinge arm and plate in typical cabinet environments.

Key Wing Mounting Plate Details For Installers

• The mounting plate is specified as a Tiomos wing design, so it matches Tiomos-style hinge arms and supports consistent geometry across multiple doors on the same run.
• The 0mm plate height keeps the hinge arm close to the cabinet surface, which is useful when the hinge system is designed around a flush mounting reference.
• The part is described as screw-on for wood screws, so it is ready to fasten directly into wood cabinet materials where threaded inserts or system screws are not used.
• The manufacturer notes 4-point fixing, giving four fastening locations that distribute load into the cabinet panel to support door weight and hinge forces over time.
• Height adjustment via elongated screw holes lets the plate shift along the slotted path, so you can fine-tune door position vertically after the plate is mounted.

Mounting And Height Adjustment For Repeatable Fit

This Grass America Tiomos wing mounting plate uses 4-point fixing, so each plate ties into the cabinet with four wood screw positions to stabilize the hinge interface. Because the plate height is rated at 0mm, the hinge arm sits at the designed reference level on the cabinet surface, helping doors align with adjacent fronts built to the same system. Height adjustment via elongated screw holes means the plate can move along the slots before final tightening, allowing vertical tuning of door gaps and reveals. The screw-on configuration for wood screws keeps the installation workflow straightforward on standard cabinet carcasses, since the plate fastens directly into the wood substrate at the specified fixing points.

Using This Hinge Base Plate In Cabinet Work

Where This Tiomos Wing Plate Fits Best

This hinge base plate sits in the Grass America Tiomos family, so it is intended for use wherever Tiomos hinge arms require a 0mm wing mounting solution on wood cabinet structures. The 4-point fixing pattern anchors the plate across four screw locations in the cabinet panel, which is useful when doors are cycled frequently and hinge loads repeat over many openings. Because the plate is described for wood screws, it aligns well with cabinets built from particleboard, MDF, or solid wood where direct screw fastening is part of the construction method. The nickel-plated steel construction provides a metal-to-metal interface with the hinge arm, supporting smooth mechanical interaction in everyday cabinet use.

Why Plate Height And Slots Support Accuracy

The 0mm wing mounting plate height establishes a clear reference for the door position, because the hinge arm is located directly at the cabinet surface without added offset from the plate itself. This matters when multiple doors share a continuous reveal line, since every mounting point follows the same height baseline. Height adjustment via elongated screw holes lets the plate slide along the slot path before tightening, which is valuable for dialing in small vertical changes after doors are hung. The 4-point fixing layout then locks that adjusted position once the wood screws are secured at all four points, helping that alignment hold during regular door operation. As part of the hinge mounting plates category, this Tiomos wing plate provides the structural link between cabinet and hinge arm that underpins consistent alignment work.

Common Questions About This Tiomos Mounting Plate

Select This Plate For Tiomos Wood Screw Installations

The Tiomos wing mounting plate from Grass America combines 0mm height, 4-point fixing, and height adjustment via elongated screw holes to support precise door alignment. For wood-based cabinet builds using screw-on Tiomos hinge layouts, this nickel-plated steel plate offers a defined mounting reference that matches the hinge system geometry. Choose this hinge mounting plates part when a 0mm wing configuration with direct wood screw fastening is required for consistent cabinet door positioning.