Tiomos Wing Mounting Plate For Precise Hinge Setup

Tiomos wing mounting plate gives you a 3mm hinge base plate that ties a Tiomos hinge cleanly into your cabinet. It creates the interface between the hinge arm and the cabinet side, so door alignment follows the plate position. This hinge mounting plate is designed for wood screws, so it suits cabinet cases and frames built in common wood-based materials. As a screw-on design, it mounts directly to the cabinet with wood screws, supporting straightforward installation on site or in the shop. The nickel-plated finish on the steel plate provides a hard surface at the hinge connection point, supporting smooth movement where the hinge bears on the plate. As a hinge mounting plate, it groups hinge loads into the fixing points, so the door weight transfers into the cabinet side through the plate footprint.

Practical Details That Support Cabinet Work

• The 3mm plate height positions the hinge relative to the cabinet side, which sets the door reveal and overlay relationship when combined with the Tiomos hinge geometry.
• The wing style plate shape spreads load away from the hinge arm, which helps distribute forces into the cabinet side where wood screws hold the plate.
• The screw-on design for wood screws lets you fasten the plate directly to wood-based cabinet materials, streamlining installation with standard screw-driving steps.
• The 4-point fixing layout secures the plate at four locations, which stabilizes the hinge interface and resists movement under repeated door use.
• The steel construction provides a rigid base under the hinge arm, which supports consistent door alignment when doors are opened and closed over time.
• The nickel-plated surface creates a smooth, metal-to-metal contact area, which supports consistent hinge motion at the plate connection.

Mounting And Height Adjustment On The Cabinet

This hinge mounting plate uses 4-point fixing with wood screws, so you fasten it at four positions into the cabinet substrate to anchor the hinge interface. Height adjustment via elongated screw holes allows you to shift the plate along the slot direction, so you can refine the door position after the screws are set. Because the screw holes are elongated, you can loosen the screws slightly, move the plate within the slots, and then retighten to capture the final vertical alignment. The screw-on configuration works with typical cabinetry construction where wood screws secure hardware directly to the cabinet case. With this layout, the 3mm plate height, fixing pattern, and adjustment slots work together to support repeatable door alignment.

Using The Hinge Mounting Plate In Cabinet Projects

Where This 3mm Wing Mounting Plate Fits

This Tiomos wing mounting plate is part of the hinge mounting plates category, positioning it as the connection element between Grass America Tiomos hinges and the cabinet. The 3mm plate height defines how far the hinge sits off the cabinet surface, so door overlay and reveal follow that dimension once the hinge is clipped on. Because it is a screw-on plate for wood screws, it suits cabinet sides, partitions, or face-frame build-ups that accept screw threads in wood-based materials. The wing geometry gives you a broader footprint on the cabinet side, which can be useful when you want the hinge loads supported across a wider area of substrate. In practice, this plate forms the stable base that lets Tiomos hinges operate consistently on doors used throughout the woodworking environment served by Wurth Baer Supply.

How Adjustment Slots And Fixing Improve Results

Height adjustment via elongated screw holes gives you a controlled way to fine-tune door alignment along the direction of the slots, which reduces rework when fitting multiple doors on a bank of cabinets. Because the screw holes are elongated, you gain a limited travel range without changing the mounting position entirely, letting you correct small reveal differences quickly. The 4-point fixing pattern anchors the plate firmly once the screws are tightened, so the adjusted position stays stable under the repeated opening and closing of the door. Working together, the 3mm plate height, wing profile, and steel construction create a solid, repeatable reference plane for the Tiomos hinge arm. For installers and shops, this combination supports consistent fit from cabinet to cabinet using the same Grass America mounting geometry.

Key Questions About This Tiomos Mounting Plate

Selecting This Plate For Tiomos Installations

The Tiomos wing mounting plate for wood screws, 3mm height, and 4-point fixing gives you a defined Grass America hinge interface for cabinet projects. When a Tiomos hinge layout calls for a 3mm screw-on plate, this wing mounting plate supplies the plate height, fixing pattern, and height adjustment via elongated screw holes needed for controlled door alignment. For woodworking professionals buying through Wurth Baer Supply, it offers a dedicated hinge mounting plate that fits into hinge base plates workflows built around Tiomos hardware.