Tiomos Face Frame Mounting Plate For Precise Hinges

Tiomos face frame mounting plate gives Grass America hinge installs a defined base so the hinge seats consistently on a face frame. This plate is a hinge mounting plate, so it sets the reference point between the cabinet face frame and the Tiomos hinge arm for repeatable alignment during runs of doors.

The plate is designed for wood screws, so it fastens directly into wooden face frames found in cabinet construction. Because it is part of the Tiomos system from Grass America, it works as the interface between the hinge and the frame, helping maintain the intended reveal and overlay dictated by the hinge geometry.

This mounting plate is nickel-plated steel, so the steel body provides a solid bearing surface under the hinge arm while the nickel-plated finish helps the plate resist wear at the screw and hinge contact areas in normal cabinet environments.

The part is classified under hinge mounting plates and hinge base plates, so it fits into standard cabinet hardware workflows where installers stage plates on the case before hanging and adjusting doors.

Key Mounting Plate Details That Support Work

• The plate uses 2 point fixing, so two screw points tie it to the face frame and create a stable base, which helps keep the hinge position from shifting when doors are opened and closed repeatedly.
• Height adjustment via elongated screw holes lets the plate move in one direction relative to the screws, so an installer can fine-tune door position on the face frame without redrilling holes during final alignment.
• The construction is steel, nickel-plated, so the plate carries hinge loads on a rigid metal core while the nickel-plated surface helps maintain a smooth interface with the hinge arm over many adjustment cycles.
• The plate is screw-on for wood screws, meaning it is driven directly into the frame with standard wood-screw installation, which fits common cabinet shop tooling and speeds layout on face frame rails and stiles.
• The product is part of Grass America Tiomos hardware, so it matches that hinge family in style and function, which simplifies organizing parts on a job where multiple Tiomos hinges and plates are used.

Face Frame Mounting And Height Adjustment Details

This hinge mounting plate installs on a cabinet face frame using wood screws, so the plate anchors directly to the wood structure that defines the cabinet opening. Because it is a 2 point fixing design, the two screw positions hold the plate against twisting, which supports consistent door swing along the height of the frame.

Height adjustment via elongated screw holes means the screw shanks locate in slotted holes in the plate, so the plate can shift along the slot before final tightening. That slot-based movement lets an installer correct door reveal up or down across a row of cabinets while using the same drilled pilot pattern.

Using This Hinge Base Plate In Cabinet Work

Where This Hinge Mounting Plate Fits Best

This Tiomos face frame mounting plate fits cabinet projects that use face frame construction and Grass America Tiomos hinges. Because it is a hinge mounting plate designed for wood screws, it is suited to solid wood or engineered wood face frames where screw pull-out resistance is required along rails or stiles.

The 3.5mm reference in the product name identifies the specific mounting plate variant, so it helps installers match the correct plate to the hinge layout specified in hardware schedules or shop drawings. Using the designated Grass America part number F058139822228 allows shops to call out this exact plate when ordering for repeated cabinet runs.

As part of the hinge base plates category from Wurth Baer Supply, this item fits into the broader hinge planning for kitchens, baths, or commercial casework where face frames are present. Positioning this plate first on the frame lets the Tiomos hinge arm lock onto a predictable base, which supports consistent reveals across banks of doors.

How Plate Design Supports Adjustment And Workflow

The 2 point fixing layout spaces two wood screw points across the plate, so the load from the door is shared between them and transmitted back into the frame, helping keep the hinge interface steady under repeated use. That stability reduces movement at the mounting point, so door alignment is less likely to drift between service visits.

Height adjustment via elongated screw holes means the plate can be nudged along its slot with the screws slightly loosened, then locked once the reveal looks correct, so installers can tune gaps without moving hinge cup positions in the door. This slot-driven movement helps on jobs where face frames are slightly out of level or where doors need to align visually with adjacent fronts.

The nickel-plated steel construction creates a durable surface under the hinge arm clamping areas, so adjustment screws bear on metal rather than soft material, which helps sustain clamping force through repeated hinge repositioning. In a production setting, that durability supports a workflow where doors may be hung, checked, removed, and re-hung without degrading the mounting surface.

Because Wurth Baer Supply identifies this product as sold in both broken and full box quantities, shops can order only the hinge mounting plates needed for a small repair or match a hardware schedule for a larger run. The note that a discount is available for full box orders gives project buyers a cost lever when standardizing on this plate across multiple cabinet jobs.

Common Questions About This Tiomos Mounting Plate

Selecting This Mounting Plate For Your Next Job

This Tiomos face frame mounting plate from Grass America gives cabinet projects a defined, adjustable hinge base on wooden face frames. With 2 point fixing, height adjustment via elongated screw holes, and nickel-plated steel construction, it supports accurate door alignment and repeatable installs.

Wurth Baer Supply offers this hinge mounting plate in both broken and full box quantities with a discount on full box orders, so it fits both repair work and larger scheduled jobs. Add this specific plate to match Tiomos hardware layouts where face frame construction and screw-on mounting are required.