Tiomos Cam Adjustable Face Frame Mounting Plate for Wood Screws, Nickel-Plated, Screw-On, 1.5mm

Tiomos Face Frame Mounting Plate For Precise Hinges

Tiomos cam adjustable face frame mounting plate is a steel, nickel-plated hinge mounting plate designed for use with Tiomos Self and Soft Close hinges. This plate creates the critical interface between the hinge and the cabinet face frame, giving a stable base for accurate door movement. The 1.5mm plate height defines the starting overlay position, helping keep reveals consistent across multiple doors. Its screw-on design for wood screws suits face frame construction where direct fastening into wood is standard. As a Grass America hinge mounting plate, it pairs with Tiomos hinges to support smooth self-close or soft-close function. When this plate sets the geometry correctly, the hinge can do its job with less fine-tuning later. The nickel-plated finish on the steel body adds a clean look at the hinge area, which matters on exposed or glass-front installations.

Key Plate Details That Support Clean Work

• This hinge mounting plate is designed for Tiomos Self and Soft Close hinges, so the geometry matches those hinges and helps doors run in the alignment range the hardware was engineered for.
• The 1.5mm face frame plate height sets a predictable starting point for overlay and reveals, which saves time dialing in gaps across a run of cabinets.
• Steel construction with a nickel-plated finish gives a solid hinge base with a uniform, bright surface that presents well when the cabinet interior or hinge area is visible.
• The screw-on layout for wood screws aligns with common face frame cabinet methods, so installers can anchor directly into the frame without extra steps.
• Two point fixing stabilizes the plate on the frame, which limits shifting when doors are adjusted or used, helping keep alignment over time.
• Height adjustment via worm gear on the Tiomos system works with this plate height, allowing controlled vertical tuning after the plate position is set.

Screw-On Face Frame Mounting And Adjustment

This screw-on face frame mounting plate is designed to be attached to the frame using wood screws through all available screw holes, which spreads load into the frame and reduces plate movement under door weight. The plate uses 2 point fixing, so the primary anchoring points are defined and repeatable from cabinet to cabinet. On the hinge side, height adjustment via worm gear handles vertical changes, so the fixed 1.5mm plate height works as a consistent reference. Side adjustment is handled via the hinge, which means once the plate is fastened, most fine-tuning happens at the hinge arm. Using a #2 Pozi drive screwdriver for hinge adjustment keeps tool choice consistent with common shop drivers and supports positive engagement in Pozi recess heads.

Using This Hinge Mounting Plate In Cabinet Runs

Where This Tiomos Mounting Plate Fits Best

This Grass America hinge mounting plate is designed for face frame cabinets where Tiomos Self and Soft Close hinges are used, so it suits kitchen, bath, or built-in work using that hinge family. The 1.5mm plate height supports layouts where a low mounting height is needed to hit the desired overlay on face frames. Because it is a screw-on plate for wood screws, it works where installers fasten directly into solid wood frames rather than system holes. The 2 point fixing pattern gives repeatable registration on each frame, which is useful when lining up multiple doors across a bank of cabinets. Steel construction with a nickel-plated finish supports applications where the hinge area is visible when doors are open, giving a consistent appearance that matches nickel-plated Tiomos hinges.

How Plate Details Support Repeatable Hinge Results

The defined 1.5mm plate height provides a known base dimension for layout, so door overlays can be planned and transferred from drawing to shop without guessing plate thickness. When this height partners with height adjustment via worm gear on the Tiomos hinge, installers gain a balance of fixed geometry and fine vertical tuning. Side adjustment via hinge means this plate can stay firmly anchored while lateral gaps are refined, reducing disturbance to the mounting points. 2 point fixing stabilizes the plate during those adjustments, which helps doors stay aligned after repeated opening and closing. Using all available screw holes to attach the plate spreads forces across the face frame, benefiting heavier doors that depend on a rigid plate-to-frame connection. Specifying the #2 Pozi drive screwdriver for hinge adjustment keeps adjustments controlled, as Pozi drive contact reduces cam-out during repeated tuning across a large job.

Common Questions About This Tiomos Mounting Plate

Selecting This Plate For Tiomos Face Frame Jobs

This Tiomos face frame mounting plate from Grass America ties Tiomos Self and Soft Close hinges to wood face frames using a 1.5mm plate height for predictable overlay. When a project calls for screw-on plates with 2 point fixing and Pozi-driven Tiomos adjustments, this plate aligns with that hardware layout. For cabinet runs using nickel-plated Tiomos hinges on face frames, choosing this steel, nickel-plated mounting plate sets a consistent base for alignment, vertical worm gear adjustment, and lateral tuning at the hinge arm.