
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Tiomos cam adjustable face frame mounting plate is a steel, nickel-plated hinge mounting plate designed for Tiomos Self and Soft Close hinges, giving cabinet builders a dedicated base component for that hinge family. As a face frame plate, it works as the interface between the Tiomos hinge and the face frame, so the hinge loads transfer cleanly into the cabinet structure. The 5mm reference in the description identifies the plate type within the Tiomos system, keeping part selection organized when matching hinges across a shop or project. Being a screw-on design for wood screws, it secures directly to the frame, so installers can fasten into solid wood rather than depending on inserts. The plate is classified under hinge mounting plates, which keeps it aligned with standard hinge layout workflows used in cabinet shops.
This Tiomos cam adjustable face frame mounting plate is described as screw-on for wood screws, so it fastens directly to the cabinet face frame using the available mounting holes. That direct screw attachment creates a fixed reference point for the Tiomos hinge, which helps hold reveal and gap settings once doors are adjusted. The specified height adjustment via worm gear means the plate itself provides vertical adjustment, so installers can raise or lower the door in small steps without moving screw positions. Because side adjustment is described as via the hinge, the plate and hinge work together: the plate handles height while the hinge handles lateral movement, so each adjustment stays clear and repeatable.
The web description states that this plate is for Tiomos Self and Soft Close hinges with 2 point fixing, so it targets cabinet doors using that hinge configuration. As a face frame mounting plate, it is applied directly on framed cabinet fronts, positioning the hinge arm correctly in relation to the frame edge. The 2 point fixing reference aligns with how the Tiomos hinge clamps to the plate, so the plate geometry is matched to that hinge interface. Because the plate uses wood screws into the face frame, it is suited to wood cabinet construction where a secure mechanical connection into the frame is standard. Within hinge layouts, this plate takes the role of the fixed base, letting the Tiomos hinge supply motion and side adjustment once the plate location is established.
The product description notes height adjustment via worm gear, which means vertical changes are driven by a cam mechanism instead of loosening and shifting the plate by hand. That worm gear motion supports precise, incremental height corrections on installed doors, which helps dial in consistent reveals across a run of cabinets. Side adjustment via hinge keeps lateral tuning on the hinge arm, so one component handles vertical and the other lateral movement, reducing overlap between adjustments and helping maintain earlier settings. The guidance to use a #2 Pozi drive screwdriver for hinge adjustment gives a specific driver style and size, which supports positive engagement with the Pozi recess during adjustment work. By specifying this driver, the system helps reduce cam-out at the screw head when installers are turning the adjustment screws under load. The note to attach base plates using all available screw holes ties the plate design directly to its mounting practice, spreading the load through every hole and supporting stable attachment on the face frame.
This mounting plate is described as being for Tiomos Self and Soft Close hinges, so it is intended to work within that specific Tiomos hinge family on cabinet projects.
The product description states height adjustment via worm gear, meaning a cam-style mechanism on the plate provides controlled vertical movement for door alignment after installation.
Side adjustment is described as via hinge, so lateral door movement is adjusted on the Tiomos hinge arm while the plate supplies the vertical function.
The description calls for a #2 Pozi drive screwdriver for hinge adjustment, which matches the Pozi recess and supports firm engagement during fine tuning.
The mounting plate is described as screw-on for wood screws, and the note to use all available screw holes indicates multiple fasten points into the face frame.
The web description lists the mounting plate as steel and nickel-plated, pairing a solid metal base with a plated surface in the hinge area.
The Tiomos cam adjustable face frame mounting plate for wood screws is specified for Tiomos Self and Soft Close hinges with 2 point fixing, so it fits directly into that hinge system on framed cabinets. Steel, nickel-plated construction and screw-on face frame mounting provide a solid base, while worm gear height adjustment and hinge-based side adjustment support clean reveal tuning. For projects using Tiomos Self and Soft Close hinges on face frame cabinets, this dedicated mounting plate offers the described interface and adjustment functions from one documented part.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GFF058149671228 Mfr# F058149671228 | Tiomos Cam Adjustable Face Frame Mounting Plate for Wood Screws, Nickel-Plated, Screw-On, 3.5mm |