Tiomos Cam Adjustable Face Frame Mounting Plate for Wood Screws, Nickel-Plated, Screw-On, 3.5mm

Tiomos Mounting Plate For Precise Face Frames

Tiomos cam adjustable face frame mounting plate defines this steel, nickel-plated hinge base plate designed for Tiomos Self and Soft Close hinges, so it gives your face-frame cabinet runs a matched foundation to the hinge family you already rely on. The plate is made from steel, which provides a solid bearing surface under the hinge arm in long-term use. Its nickel-plated finish gives a clean, professional look that pairs visually with Tiomos hinges on exposed cabinet interiors. As a hinge mounting plate, it sits between the hinge and the face frame, so it establishes both overlay position and long-term stability. The plate is built for 2 point fixing, which anchors it securely to the face frame at two locations for stable alignment when doors are opened and closed.

Key Tiomos Plate Details For Daily Work

• This face frame mounting plate is part of the Tiomos Self and Soft Close hinge system, so it keeps hinge and plate geometry matched when you are standardizing a shop setup or extending an existing Tiomos installation across more openings.
• The plate is described as steel and nickel-plated, so it offers a rigid connection under the hinge arm while presenting a corrosion-resistant, cabinet-friendly surface that holds up as doors cycle over time.
• With 2 point fixing, the plate fastens to the frame at two positions, so it resists twisting under door load and helps your reveal lines stay consistent after repeated use and adjustments.
• Height adjustment is via a cam-style worm gear, so you can shift the door position in controlled increments without loosening the whole plate, which speeds fine tuning when lining up multiple doors in a bank.
• Side adjustment is handled through the Tiomos hinge itself, so this plate works together with the hinge arm adjustments to deliver both vertical and horizontal alignment from the same hardware family.
• The plate attaches using all available screw holes, so each screw shares the load into the face frame and supports heavier or taller doors without the plate working loose under everyday operation.

Face Frame Mounting And Screw-On Details

This Tiomos face frame mounting plate is identified as screw-on for wood screws, so it is intended to fasten directly into a wooden face frame using traditional screw-driving tools already common in cabinet shops. The 3.5mm reference in the description ties to its sizing in the Tiomos system, so it matches that specific plate height standard when you are working from manufacturer charts or reproducing an existing cabinet layout. Because attachment is through all available screw holes, the load from the door and hinge is spread across multiple points, which supports stable performance on face frames subjected to frequent opening cycles.

Using This Plate In Tiomos Hinge Runs

Where This Tiomos Mounting Plate Fits Best

This Tiomos cam adjustable face frame mounting plate is described for Tiomos Self and Soft Close hinges, so it fits projects where that specific hinge family is already specified across the job. As a hinge mounting plate in the Hinges | Hinge Base Plates category, it is suited to cabinet face frames that rely on base plates to set hinge positions instead of direct-screw hinge mounting. The plate is part of the Grass America line, so it aligns with Tiomos hinge geometry from the same manufacturer and supports consistent overlay and gap relationships. Because it relies on 2 point fixing into the face frame, it fits work where the frame rail or stile offers enough width for two fastener positions and where a rigid, play-free base is important for heavier cabinet doors.

Adjustment Features That Support Clean Reveals

Height adjustment on this plate is provided via a worm gear, so minor vertical shifts can be dialed in without removing the hinge arm, which is useful when you are chasing tight reveals across a long run of cabinets. Side adjustment is specified as being via the hinge rather than the plate, so vertical alignment is handled at the base plate while lateral corrections happen on the hinge arm, separating adjustments to reduce unintended movement in other directions. The plate uses 2 point fixing together with all available screw holes, so the structure resists creeping over time after you complete your adjustments. For hinge tuning, the description calls out using a #2 Pozi drive screwdriver, so tool engagement is matched to the screw recess design and supports efficient adjustment work along the full bank of doors.

Common Tiomos Mounting Plate Questions Answered

Select This Plate For Tiomos Face Frame Runs

This Tiomos cam adjustable face frame mounting plate from Grass America combines steel construction, nickel-plated finish, and worm gear height adjustment in a dedicated base for Tiomos Self and Soft Close hinges. With 2 point fixing into the face frame and side adjustment managed at the hinge, it provides a stable, repeatable reference for cabinet doors across small or large runs. When a project calls for Tiomos hinges on face frame cabinets and relies on precise reveals, this plate aligns with that specification and supports consistent installation practices.