Tiomos Face Frame Mounting Plate For Precise Hinges

Tiomos cam adjustable face frame mounting plate is a hinge mounting plate from Grass America designed for Tiomos self and soft close hinges, so it ties directly into that hinge system when you are building or upgrading face frame cabinetry. This plate is made of steel, giving the hinge connection a solid metal base where the door loads transfer into the frame. The nickel-plated finish on the plate provides a hard metallic surface, which helps the plate slide cleanly during cam and side adjustments and keeps the interface tidy around the hinge area. The plate is designed for wood screws, so it fastens directly into the face frame material most cabinet shops already use. As a 4.5mm face frame plate, it sets the hinge height relationship to the frame, which defines how the door sits relative to the opening on Tiomos applications.

Key Mounting Plate Details For Daily Shop Work

• This mounting plate is for Tiomos self and soft close hinges, so it keeps hinge and plate geometry matched and avoids mixing systems on a run of doors.
• The plate uses 2 point fixing, so two wood screw points anchor it to the frame and spread hinge loads into the face frame.
• Steel construction with a nickel-plated surface creates a rigid hinge base while presenting a clean metal interface for adjustments and service.
• The 4.5mm plate height establishes a consistent hinge-to-frame relationship, which keeps door reveal and overlay behavior predictable across cabinets.
• Screw-on design for wood screws ties the plate straight into wood face frames, matching typical cabinet construction methods in the shop.

Mounting Plate Setup And Adjustment Workflow

Height adjustment via worm gear is built into this plate, so you dial the plate up or down instead of shifting the whole hinge stack by loosening mounting screws. Side adjustment is handled via the hinge, so the plate locks the base position while the Tiomos hinge finetunes left-right alignment. A #2 Pozi drive screwdriver is specified for hinge adjustment, so that driver style seats correctly in the hinge adjustment screws during setup. The instruction to attach base plates using all available screw holes means every provided hole is part of the load path, so the plate works at full strength on the face frame.

Using This Plate In Tiomos Hinge Runs

Where This 4.5mm Face Frame Plate Fits

This hinge mounting plate is a 4.5mm face frame plate designed for use with Tiomos self and soft close hinges, so it belongs wherever those Tiomos hinges are used on face frame cabinets. The face frame plate style matches cabinetry built with a front frame instead of full-overlay frameless sides, so it suits many traditional and semi-custom cabinet runs. Because the plate is designed for wood screws, it nests into common hardwood or softwood frame stock without special fastener systems. The Grass America branding on this plate keeps it aligned with the Tiomos hinge line, so hinge arms and plates share the same engineering references during layout and replacement.

Why Adjustment Details Support Clean Results

The cam adjustable design with height adjustment via worm gear lets you correct vertical door position at the plate, so you can respond to small reveal shifts without remounting hinges. When that worm gear moves the plate, the fixed 4.5mm base height and steel structure hold their geometry, so the hinge continues to track consistently through the door swing. Side adjustment via hinge means the hinge arm itself handles left-right moves, so the plate stays anchored while still allowing you to tune gaps between doors or between door and frame. Using a #2 Pozi drive screwdriver on the hinge adjustment screws provides a positive bit engagement, so adjustments stay controlled while you are working along a bank of cabinets. Attaching base plates using all available screw holes spreads the tension and compression from the door over the full plate footprint, so hinge performance stays stable over repeated openings.

Common Tiomos Mounting Plate Selection Questions

Selecting This Tiomos Plate For Face Frames

This Tiomos cam adjustable face frame mounting plate from Grass America combines a 4.5mm height, steel construction, nickel-plated surface, and screw-on design for wood screws, so it serves as a purpose-built base for Tiomos self and soft close hinges on face frame cabinets. The 2 point fixing, worm gear height adjustment, side adjustment via hinge, and #2 Pozi drive screwdriver specification keep this plate oriented toward efficient setup and repeatable reveals. For Tiomos hinge runs on face frame work, this plate provides the defined geometry and adjustment range that support consistent door alignment across the project.