Senco 19 gauge staple is described as a 19 gauge x 1/4 inch crown x 3/4 inch long staple, so it delivers a narrow crown with moderate length that suits detailed fastening where appearance and control are important. The 3/4 inch leg length reaches into cabinet parts, trim, and sheet goods without excessive penetration, which helps when fastening thinner materials or case components. The 1/4 inch crown concentrates holding power along a tight line, which benefits work such as molding and lattice where a discreet fastener line is preferred. This staple is listed under Staples in the Fasteners category, so it serves as a general fastening option for wood-based projects. The manufacturer's part number K11BAB provides a clear identification reference when matching fasteners across jobs or reordering for consistent results.
The web description states that this staple fits tools Senco SLS-20K, LN3045 and similar models, so the 19 gauge, 1/4 inch crown, 3/4 inch length format matches the magazine and drive system used in those staplers. When a staple format aligns with the listed tools, loading and cycling are set up to follow the tool design rather than forcing an off-size fastener. Using a staple that fits the SLS-20K and LN3045 helps keep fastening depth and drive energy within the tool's intended range, which supports consistent seating across cabinets, underlayment, trim, and flooring work.
The web description specifies cabinets as an application, so this 19 gauge x 1/4 inch crown x 3/4 inch long staple is suited to fastening cabinet components such as sides, stretchers, or internal parts where a narrow crown and moderate leg length are appropriate. Casebacks are identified as another application, meaning the staple is configured to secure back panels to cases or cabinets, helping hold sheet goods against frames in furniture or built-ins. Underlayment is also listed, so the staple length and gauge engage subfloor materials and panel goods in flooring build-ups where a repeatable penetration depth into the substrate is important. Molding and trim are noted in the description, which aligns the narrow 1/4 inch crown with decorative work where fastener visibility needs to be controlled while still providing hold along edges.
The mention of lattice as a specific application shows that the 19 gauge wire and 3/4 inch leg manage thin, narrow strips without overpowering them, which helps spacing and alignment stay consistent across multiple attachment points. Hardwood floors are also identified in the web description, indicating that the staple geometry supports fastening into hardwood where a 3/4 inch leg can bite into the material without extending excessively deep. The stated fit with Senco SLS-20K, LN3045 and similar models ties the staple dimensions directly to known staplers, so the fastener length, crown width, and gauge are coordinated with the drivers and magazines installers already use. The product is further described under Staples within the Fasteners category, reinforcing its role as a fastening element that ties cabinet parts, flooring layers, and trim together in a repeatable pattern. The manufacturer part number K11BAB provides a stable reference across jobs, helping crews standardize on a single staple spec when they want consistent performance in cabinets, casebacks, underlayment, molding, lattice, and hardwood floor work.
The K11BAB staple is described as 19 gauge with a 1/4 inch crown and 3/4 inch length, which suits fastening many cabinet, trim, and flooring components.
The Senco 19 gauge staple fits tools Senco SLS-20K, LN3045 and similar models, aligning the fastener size with those stapler designs.
The web description lists cabinets and casebacks as applications, so this staple works in fastening cabinet components and back panels to supporting frames.
The staple is specified for underlayment and hardwood floors, so its 3/4 inch leg length supports fastening panels and hardwood in flooring assemblies.
The product description lists molding and trim as applications, so the 1/4 inch crown helps secure decorative pieces with a narrow fastener line.
The web description names lattice as an application, indicating the 19 gauge, 3/4 inch long staple is suited to fastening lighter lattice constructions.
This Senco 3/4 inch staple, identified as K11BAB, is specified as a 19 gauge x 1/4 inch crown x 3/4 inch long fastener for cabinets, casebacks, underlayment, molding and trim, lattice, and hardwood floors, so it aligns with many common woodworking tasks. Its stated fit with Senco SLS-20K, LN3045 and similar models ties directly into staplers already set up in many shops, simplifying fastener choice for repeat cabinet, trim, and flooring work. For projects that match these listed applications, this staple offers a consistent format across multiple job types.
Sold In: 1 Box