Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Senco 18 gauge 5/8 inch staple is a 3/8 inch crown, 5/8 inch long staple designed for cabinetry and furniture, aluminum siding, mobile homes and RVs, and light metal to wood attachment. The 18 gauge wire creates a fine fastener profile that secures materials while keeping the staple line discreet on finished cabinetry and furniture surfaces. The 3/8 inch crown spans a practical width across trim or siding, helping distribute holding force along the joint in cabinetry, aluminum siding, and panel work. The 5/8 inch leg length drives through typical thin metal and into wood, supporting light metal to wood attachment in mobile homes, RV construction, and similar assemblies. This staple belongs to the Senco fastener family from Senco Products, Inc., so it matches common 18 gauge stapling applications in woodworking and light construction environments.
This staple fits tools listed as Senco SKS-M and Fasco F21T SG-25 and similar models, so installers using those staplers can match this fastener to existing 18 gauge, 3/8 inch crown setups. Matching the 3/8 inch crown and 5/8 inch length to the Senco SKS-M and Fasco F21T SG-25 supports consistent driving depth and feed performance on repeated cabinetry, siding, and panel runs. Using a staple that fits these tools allows crews who already work with Senco or Fasco staplers to keep the same workflow while moving between cabinetry, aluminum siding, and light metal to wood fastening tasks in mobile homes and RVs.
The web description lists cabinetry and furniture as primary applications, so this 18 gauge, 3/8 inch crown, 5/8 inch long staple aligns with assembling cabinet boxes, securing backs, and attaching light trim where a smaller fastener pattern is preferred. Aluminum siding is also named, which positions this staple for fastening siding panels to wood framing in projects that match the staple length and holding profile. The reference to mobile homes and RVs shows that it suits thin metal or siding materials used in those structures, where light metal to wood attachment is required. Because light metal to wood attachment is explicitly noted, this staple can be applied where thin metal skins or trims must be anchored to wood in cabinetry surrounds, RV interiors, or light exterior trim on mobile home builds.
The 18 gauge wire, combined with a 3/8 inch crown, provides a balance between a discreet appearance and enough crown width to resist pull-through on cabinetry panels and aluminum siding. In cabinetry and furniture work, this balance helps keep visible surfaces cleaner while still securing backs, stretchers, and light trim. The 5/8 inch leg length is long enough to pass through thin aluminum or sheet material and embed into wood, which matters for light metal to wood attachment where over-penetration is not desired. Matching this leg length to aluminum siding and mobile home or RV skins helps maintain a controlled drive depth into wood framing. The fact that this staple fits Senco SKS-M and Fasco F21T SG-25 and similar models means installers running those staplers can rely on established magazine, driver, and guide setups to produce consistent staple placement across cabinetry runs, siding strips, and panel seams.
The M10BABN staple is specified for cabinetry and furniture, aluminum siding, mobile homes and RVs, and light metal to wood attachment, so it targets thin material fastening into wood in these applications.
The Senco 18 gauge staple fits Senco SKS-M, Fasco F21T SG-25, and similar models, allowing use with those tools where 18 gauge, 3/8 inch crown, 5/8 inch long staples are specified.
The 3/8 inch crown provides a moderate width across joints, helping stabilize cabinet components and furniture parts while keeping the visible staple line relatively narrow on finished surfaces.
The 5/8 inch leg length is sized to pierce typical thin metal or siding and embed into wood, which supports light metal to wood attachment without excessive penetration.
The staple is listed for aluminum siding and for mobile homes and RVs, so it matches siding and panel fastening tasks that use thin materials over wood framing in these structures.
These Senco staples are classified as Staples in the Fasteners|Staples category, placing them within a fastener range used for stapling applications like cabinetry, siding, and panel work.
The Senco 18 gauge 5/8 inch staple with 3/8 inch crown and M10BABN designation ties directly to cabinetry and furniture, aluminum siding, mobile homes and RVs, and light metal to wood attachment. When your work relies on Senco SKS-M, Fasco F21T SG-25, or similar staplers, this staple aligns with those tools and with the specified applications. Selecting this Senco staple through Wurth Baer Supply connects your cabinetry, siding, and light metal to wood fastening tasks to a defined 18 gauge, 3/8 inch crown, 5/8 inch long fastener profile.
Sold In: 1 Box
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Box |  SNM11BAB Mfr# M11BABN | Senco 18 Gauge x 3/8" Crown x 3/4"L Staple, M11BABN - 10000/Box |