80mm wire grommet from Custom Accents gives a defined 3.125 inch bore opening that routes wires through a surface, so cable transitions stay organized instead of spreading across the work area. The grommet sits in a round cutout and creates a consistent edge around the bore, helping reduce abrasion on passing cords during everyday use. Its role as a grommet in multimedia and workspace components supports straight, repeatable wire paths in desks, cabinetry, or shop fixtures where multiple cables pass through a panel. The product sits within the shelf, closet, and garage organization family, so it fits naturally into storage or utility pieces that carry power or data lines. White color on the rim visually ties into light-toned surfaces, letting the opening look finished rather than like a raw hole in the panel.
This wire grommet is built around a 3.125 inch, or 80mm, bore dimension, so the panel opening is established by that single round measurement. When the matching hole is bored in wood or another panel material, the grommet body sits inside that cutout and defines the perimeter of the cable pass-through. Its circular form suits drill-based cutout methods common in cabinetry or shop setups, which streamlines layout for repeated holes across a run of worktops, closet panels, or organizer boards. As a plastic grommet, it adds a shaped edge between the panel and passing wires, so cords move against the molded rim instead of the raw cut edge.
The 80mm wire grommet from Custom Accents is part of the shelf, closet, and garage organization category, so it fits into storage-based projects that still need power or data access. In a closet system, a drilled 3.125 inch opening accepts the grommet and gives a route for charging leads or low-voltage runs between compartments, keeping them concentrated at the bore point. In a garage or utility shelving run, the same opening lets extension cords or tool cords pass through vertical or horizontal panels so equipment on different levels can stay connected without cables dangling across the face of the structure. The product is also classified under multimedia and workspace components, which places it naturally in desks, counters, or workbenches where several cables must penetrate the top or side panels through a controlled, finished opening.
The specified 3.125 inch, or 80mm, bore on this wire grommet directly defines the drilling layout, so every matching opening across a row of cabinets or work surfaces can be cut to one dimension and accept the same part. That repeatable diameter supports consistent placement of cable pass-throughs wherever the grommet is used in an installation, whether in closets, garage organization, or a workspace setting. The grommet is described as plastic, so the cable interface is formed by a molded material rather than a raw board edge, giving the wires a smoother contact surface as they are pulled or adjusted around the rim during regular use. The Custom Accents brand and the CPF-2801 manufacturer part number together provide a specific identifier, making it easier to reorder the exact same 80mm wire grommet when additional panels or matching openings are added later to an existing storage or multimedia layout.
The 80mm wire grommet uses a 3.125 inch, or 80mm, bore opening, so drilling to that diameter creates the round cutout that accepts the grommet body for a consistent cable pass-through.
The wire grommet is categorized under shelf, closet, and garage organization and multimedia and workspace components, so it suits storage systems, desks, and work areas that route cables through panels.
The 80mm bore gives a fixed drilling dimension, so multiple panels across closets, garages, or worktops can be cut to the same size and accept the same grommet for uniform cable openings.
The CPF-2801 grommet is plastic, so the rim that guides wires is molded, providing a shaped edge between cables and the panel cutout in everyday routing tasks.
The grommet is white, so it visually blends into light-colored shelves, closets, or work surfaces, helping the cable opening look intentional rather than like a raw drilled hole.
The manufacturer part number CPF-2801 identifies this specific 80mm white plastic wire grommet from Custom Accents, so matching that code keeps future orders aligned with existing openings.
The 80mm wire grommet from Custom Accents combines a defined 3.125 inch bore with a white plastic body, giving cable openings a consistent size and a finished edge. Its placement in shelf, closet, garage, and workspace components supports projects that route power or data through panels. Using the CPF-2801 part number ties additional orders back to this exact grommet, so new cutouts in future cabinets, desks, or storage runs can match the original openings and maintain a unified look across the installation.
Sold In: 1 Each