Tiomos Adjustment Wing Mounting Plate for Wood Screws, 2-Point Fixing, Nickel-Plated, Screw-On, 9.5mm

Tiomos Wing Mounting Plate For Precise Hinge Setup

Tiomos adjustment wing mounting plate is a hinge mounting plate from Grass America that supports accurate setup of Tiomos hinge positions in cabinet builds and casework. This plate is specified as a 9.5mm wing plate, so it establishes a consistent mounting height relative to the cabinet, which helps keep doors aligned across a run. The plate is designed for wood screws, giving a direct connection into wood cabinet material for a secure mounting base. As a hinge base plate in the Grass America Tiomos system, it provides the interface between the cabinet and the hinge arm, so the cabinet side installation determines how the door will sit. The manufacturer part number F058139888217 identifies this exact configuration for repeat ordering and matching on future jobs.

Key Mounting Details That Support Cabinet Work

• This hinge mounting plate is described as a 2 point fixing design, so two fixing points are used to fasten the plate, which helps resist twisting forces on the hinge side of the door.
• The plate is a screw-on style for wood screws, so it mounts directly to wood substrates, which simplifies installation on standard cabinet cases using familiar fastening methods.
• Height adjustment is provided via a worm gear, so fine vertical changes can be made at the plate, which helps dial in reveals without relocating screw positions.
• The 9.5mm wing plate configuration sets a defined mounting height off the cabinet surface, so hinge geometry stays consistent across multiple doors on the same project.
• Construction is described as zinc die-cast and steel with a nickel-plated finish, so the plate combines metal strength with a plated surface that helps resist wear during repeated hinge adjustments.

Mounting And Height Adjustment For Accurate Fit

This hinge mounting plate is described as screw-on for wood screws, so the installer positions the plate on the cabinet and drives wood screws through the two fixing points, creating a firm base for the hinge arm. The 2 point fixing layout holds the plate flat against the cabinet material, which supports hinge function by keeping the arm seated on a stable surface. Height adjustment via worm gear is built into the plate, so vertical alignment is tuned by turning the adjustment mechanism instead of moving the plate, allowing controlled, repeatable changes to door position. Because the plate is specified as a 9.5mm wing plate, its height dimension is fixed into the design, which supports consistent alignment when the same plate is used on every hinge location on a run of cabinets.

Using This Grass Plate In Hinge Layouts

Where This 9.5mm Wing Plate Fits Best

This product is defined as a Tiomos adjustment wing mounting plate from Grass America, so it is used as the mounting interface for Tiomos hinges in cabinet and casework applications. The description as a hinge mounting plate and hinge base plate means it is installed on the cabinet side to receive the hinge arm, making it part of the structural connection between cabinet and door. Because it is specified for wood screws, it suits wood-based cabinet construction where a screw-on plate is appropriate for the material. The 9.5mm wing plate dimension sets the mounting height, so using this plate throughout a job supports uniform hinge geometry when the same hinge family is used on every door.

How Worm Gear Adjustment Supports Door Alignment

The plate provides height adjustment via a worm gear, so the installer uses the adjustment feature on the plate to raise or lower the hinge position in small increments without changing screw locations. This worm gear style of adjustment allows controlled movement along the vertical axis, which helps fine-tune door reveals and alignment after the door is hung. Because the plate stays fixed by its 2 point fixing screw pattern, the worm gear handles the adjustment work instead of shifting the plate, so the fasteners remain undisturbed during alignment. Combined with the 9.5mm wing plate height, this adjustment method supports repeatable results when multiple doors are set to the same reveal on a bank of cabinets.

Common Questions About This Tiomos Mounting Plate

Select This Plate For Consistent Tiomos Hinge Layouts

Choose this Tiomos adjustment wing mounting plate when a 9.5mm wing plate with screw-on fixing into wood and worm gear height adjustment is specified for the job. Using the Grass America part F058139888217 across a project keeps the hinge mounting geometry consistent and supports efficient alignment with the same plate on every cabinet position.