Tiomos Adjustment Wing Mounting Plate for Wood Screws, 2-Point Fixing, Nickel-Plated, Screw-On, 19mm

Tiomos Wing Mounting Plate For Precise Hinge Setup

Tiomos adjustment wing mounting plate is a hinge mounting plate from Grass America that supports Tiomos hinge layouts where a 19mm plate height is required. This plate establishes the hinge-to-cabinet interface, which is critical for repeatable door alignment in production and retrofit work. The 2-point fixing pattern locates the plate securely, helping cabinet doors track consistently on face frames or case sides. Because the plate is designed for wood screws, it integrates directly into typical cabinet-grade wood substrates on shop-built or installed casework. The manufacturer part F058139894217 identifies this exact 19mm wing plate, letting you match specifications across drawings, purchase orders, and jobsite replacements. As a dedicated hinge mounting plate, it forms the stable base that Tiomos hinge adjustments rely on to hold reveals and margins through daily use.

Key Tiomos Mounting Details That Support Your Work

• The 19mm wing mounting plate height defines the hinge offset, which sets your door reveal and overlay relationship in a Tiomos hinge system for consistent cabinet runs.
• The 2-point fixing layout positions the plate with two fastening points, helping the hinge line stay straight across multiple doors along a cabinet or case.
• Height adjustment via worm gear provides controlled vertical movement at the plate, so door gaps can be tuned with fine increments rather than shifting the cabinet or drilling new holes.
• The screw-on design for wood screws ties directly into wood cabinet components, allowing the plate to be fastened where the case structure best supports the hinge load.
• The zinc die-cast and steel construction, finished nickel-plated, forms a rigid mounting surface with a corrosion-resistant exterior suited to typical interior cabinet environments.

Mounting And Adjustment Details For Tiomos Hinges

This hinge mounting plate is designed for screw-on installation with wood screws into cabinet carcasses or frames, which lets installers anchor hinges in solid material without additional inserts. The 2-point fixing pattern defines two screw locations that hold the plate stable while the Tiomos hinge arm is adjusted. Height adjustment via worm gear at the plate means vertical changes are handled mechanically at the mounting point, so door reveals can be dialed in without moving the cabinet or altering hinge cup bores. The 19mm wing plate height sets the working geometry between the door and cabinet, allowing Tiomos hinges using this plate height to maintain their intended motion and closing path.

Using This 19mm Wing Plate In Cabinet Projects

Where This Tiomos Wing Plate Fits Best

This hinge mounting plate serves applications using Tiomos hinges where a 19mm plate height is part of the specified hardware stack. In cabinet projects, it mounts to wood cabinet sides or face frames with wood screws, establishing a stable reference line for the hinge row. The wing style plate extends laterally from the screw area, providing support for the hinge interface where design calls for this geometry. Because it is a hinge mounting plate in the Grass America Tiomos family, it ties into that hinge system so doors open and close along the intended path when the matching hinge is used.

How Worm Gear Height Adjustment Supports Clean Reveals

This Tiomos adjustment wing mounting plate uses height adjustment via worm gear to move the hinge interface vertically at the plate. That screw-driven motion lets installers shift a door up or down in small, repeatable steps while the plate remains anchored by its 2-point fixing. Since the 19mm wing plate height defines the starting geometry, the worm gear fine-tunes alignment without altering drilling patterns or relocating the hinge cup. The zinc die-cast and steel, nickel-plated body holds the adjusted position, so once the worm gear is set, the hinge relationship to the cabinet stays steady across regular door operation.

Common Questions About This Tiomos Mounting Plate

Select This Wing Plate For Tiomos Hinge Layouts

The Tiomos adjustment wing mounting plate for wood screws, 19mm height, aligns with Tiomos hinge systems that specify this plate style and dimension. By using the Grass America F058139894217 part, installers anchor hinges on a stable zinc die-cast and steel, nickel-plated base with 2-point fixing. The height adjustment via worm gear supports clean margins after installation, so cabinet doors can be tuned without layout changes. For projects calling for a 19mm Tiomos wing mounting plate for wood screws, this plate delivers the defined geometry and adjustability that keep hardware layouts on spec.