Deltana solid brass cabinet hinge gives you a compact, semi-concealed way to hang doors while keeping a traditional look with ball tip finials, which suits cabinet projects where exposed hardware is part of the design. The hinge size of 2-1/2 x 1-11/16 inches keeps the leaf footprint small, which helps on tighter face-frame layouts or smaller cabinet doors. A full mortise mounting type lets the leaves sit flush in the cabinet and door, which supports smooth swinging without a thick gap at the edge. The polished brass finish brings a bright brass appearance, which matches projects that are already using polished brass hardware. The hinge design as a semi-concealed hinge positions most of the hinge inside the mortise while leaving decorative tips visible, which balances a clean cabinet face with classic hinge details.
This Deltana full mortise cabinet hinge uses a screw-on mounting pattern with wood screws sized at #7 x 3/4 inch, which lines up with common drill and drive steps on cabinet doors and frames. The square corner leaf format works with straight-bit routed mortises, which can speed layout when running multiple doors on a job. With a leaf thickness of .093 inch, mortise depth can be set to the same dimension across the door and frame, which keeps the hinge seating predictable from opening to opening. The hinge size of 2-1/2 x 1-11/16 inches defines the bearing area on the door edge and frame stile, which helps plan where to place the hinge relative to rails or adjacent hardware. The ball tip finials remain exposed beyond the barrel, which adds a finished point at the top and bottom of each installed hinge.
This Deltana full mortise cabinet hinge fits cabinet applications that call for semi-concealed hardware with decorative ball tip finials, which can be useful on furniture-style cabinets or built-ins where the hinge becomes part of the visible trim. The 2-1/2 x 1-11/16 inch size suits smaller to mid-size cabinet doors, which helps keep the hinge in scale with narrow stiles or lighter door constructions. Because the hinge is part of the semi-concealed hinge class, much of the hardware sits within the wood, which keeps the door edge cleaner while still showing the hinge barrel and finials. The polished brass finish ties in with other polished brass components on the same project, which keeps knob, pull, and hinge finishes aligned along a run of doors.
The full mortise mounting style on this semi-concealed full mortise hinge lets the leaves recess into both the door and frame, which supports repeatable alignment when mortises are cut to the same depth across multiple openings. Square corners on the hinge leaves work with mortises cut by straight bits or by chisels, which favors shop workflows that are already set up for square pockets rather than rounded corners. The .093 inch hinge thickness gives a fixed reference for setting cutting depth, which helps prevent uneven reveals caused by overcut or undercut pockets. Having six holes in the hinge leaf gives several screw positions, which helps draw the leaf flat to the wood and maintain hinge alignment once the cabinet door is swung through its range. The specified #7 x 3/4 inch wood screw size ties directly to pilot drilling steps, which supports consistent bite in typical cabinet species without overdriving. Ball tip finials at the ends of the barrel provide a defined stop visually at the top and bottom of the hinge, which can help line up multiple hinges along a face frame for a uniform look.
The CHA2517U3 is a Deltana solid brass cabinet hinge in the semi-concealed full mortise hinge class, which suits cabinet doors where most of the hinge is recessed into the wood.
This Deltana full mortise cabinet hinge measures 2-1/2 x 1-11/16 inches, which helps plan hinge locations on cabinet doors and face frames relative to rails and stiles.
This cabinet hinge is a Deltana solid brass cabinet hinge with a polished brass finish, which aligns with projects using bright brass cabinet hardware.
The full mortise mounting on this hinge recesses both leaves into the door and frame, which supports a flush fit and consistent reveals when mortises are cut accurately.
This hinge has square corners and six holes, which matches square-cut mortises and offers multiple screw points to pull the hinge leaf firmly against the wood.
This cabinet hinge is specified for #7 x 3/4 inch wood screws, which guides pilot drill sizing and helps achieve consistent fastening into the cabinet material.
The Deltana solid brass cabinet hinge with full mortise mounting, polished brass finish, and ball tip finials pairs well with cabinet work that uses brass hardware throughout. The 2-1/2 x 1-11/16 inch size, .093 inch thickness, six-hole pattern, and square corners give clear dimensions to build into layout, cutting, and drilling steps. Using the specified #7 x 3/4 inch wood screw detail connects directly to fastener choice and pilot drilling on both doors and frames. For cabinet or woodworking projects needing a semi-concealed full mortise hinge in polished brass, this CHA2517U3 hinge offers a defined format to work into the job plan.