Berenson Up Pull 5/8" (16 mm) Center to Center, Brushed Nickel, 9739-1BPN-C

Berenson Up Series Pull For Precise 16 mm Spacing

Berenson Up Series pull gives a 5/8 inch (16 mm) center to center mounting layout, which positions fasteners consistently across doors and drawers for a uniform cabinet run. The zinc die cast material forms a solid pull body that supports everyday opening and closing without flexing in normal cabinet use. The brushed nickel finish adds a muted metal look that fits decorative hardware layouts in many shops and projects. A 1-5/8 inch overall length keeps this pull compact, so it fits smaller fronts where space around the stile is tight. The 2-15/16 inch projection sets the grip out from the surface, creating room for fingers to grab the pull comfortably. A 3/8 inch width provides a slim front profile, which helps maintain clean visual lines across multiple fronts.

Key Berenson Up Series Pull Details In Use

• The 5/8 inch (16 mm) center to center spacing defines hole placement, which guides drilling jigs and templates so repeated cabinet fronts align visually across a run.
• The brushed nickel finish supplies a consistent metal color, which supports matching with other brushed nickel decorative hardware in the same room or bank of cabinets.
• Zinc die cast construction forms the pull from a single molded body, which gives a stable grip point for opening doors and drawers during daily operation.
• The 1-5/8 inch overall length keeps this pull compact, which helps when fitting hardware on narrow drawer faces or small doors with limited rail width.
• The 2-15/16 inch projection stands the pull off the surface, which creates finger space between hand and door face for comfortable gripping.
• The 3/8 inch width defines a slim front edge, which affects how far the pull visually stands out on modern, streamlined cabinet designs.
• The M4 screw size spec sets the thread interface, which matters when matching to pre-tapped holes or selecting compatible installation fasteners for this pull.
• The 1-3/32 inch base dimension defines the footprint at the mounting area, which affects how the pull seats against the surface and covers the drilled hole.

Mounting Dimensions That Support Clean Alignment

The 5/8 inch (16 mm) center to center measurement defines the exact distance between mounting points, which lets installers set up drilling jigs for repeatable hole placement. With a 1-5/8 inch overall length, the pull keeps its ends close to the mounting zone, which helps when hardware must stay clear of neighboring edges or adjacent pulls. The 1-3/32 inch base dimension describes the contact area against the door or drawer, which helps the pull sit flat over the mounting holes. The specified M4 screw size provides the thread standard, which guides selection of matching machine screws during installation on cabinet fronts.

Using This Brushed Nickel Pull In Cabinet Projects

Where This 16 mm Center To Center Pull Fits

This Berenson Up Series pull, with its 5/8 inch (16 mm) center to center measurement, fits layouts that call for closely spaced mounting points on smaller doors and drawers. The compact 1-5/8 inch overall length works well on narrow rails or shallow drawer fronts, where larger pulls might crowd adjacent edges. Its 3/8 inch width gives a slim face, which suits projects targeting a light, minimal hardware look on modern cabinets or furniture. The brushed nickel finish supports use wherever a softer, brushed metal appearance is desired in a decorative hardware plan, tying together hinges, knobs, and pulls finished in similar brushed nickel tones.

Details That Help Repeatable Berenson Pull Results

The defined 5/8 inch center to center measurement allows installers to rely on one drilling setup for multiple fronts, which cuts layout time and supports straight sight lines along cabinet rows. A 2-15/16 inch projection sets a predictable standoff from the surface, which helps maintain consistent grip depth when this pull is used across a bank of doors and drawers. The zinc die cast construction provides a uniform body shape, which helps each pull seat the same way against the surface when tightened. The 1-3/32 inch base dimension keeps the pull footprint consistent, which matters when aligning multiple pulls so their bases line up evenly in a project.

Common Questions About The Berenson Up Series Pull

Selecting This Berenson Pull For Your Next Run

The Berenson Up Series 9739-1BPN-C pull delivers a 5/8 inch (16 mm) center to center layout, supporting tight, repeatable mounting on compact fronts. With its zinc die cast body, brushed nickel finish, and defined projection and base dimensions, it provides predictable alignment and a coordinated metal look across cabinets and furniture. For projects built around 16 mm spacing and a slim brushed nickel profile, this pull offers clear measurements that translate directly into layout, drilling, and visual consistency.