Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the Blum TANDEMBOX Metal Design Element in Gray, a 26 inch profile that spans the full width of the drawer to create a clean integrated reveal between the drawer front and the side profile. It is a finishing component for TANDEMBOX drawer systems, not a structural or slide part.
The design element addresses one of the more visible details in a TANDEMBOX installation: the horizontal transition zone between the drawer front and the top edge of the side profile. Without it, that area reads as a gap or an unfinished edge. With it, the drawer reads as one continuous plane from front to side, which is the look that distinguishes a finished cabinet from an assembled one. It is particularly relevant on kitchen island drawers, tall pantry pull-outs, and open-concept installations where drawer interiors are visible from multiple angles. If the front is handleless, this element also contributes to the clean-line reveal that makes push-to-open and touch-latch fronts look intentional rather than hardware-constrained.
The element is made from metal and finished in Gray — the same finish designation Blum uses across the TANDEMBOX Gray color family, so it coordinates with Gray TANDEMBOX side profiles, back panels, and cover caps without color-matching guesswork. Metal construction means it holds its geometry across temperature and humidity cycles that would bow a plastic trim part over time. Gray is a neutral that reads well against both light and dark drawer fronts, which gives designers latitude on the front material without worrying about the trim reading as a contrast element.
Cabinet shops running TANDEMBOX in Gray use this element when the design calls for a finished reveal at the drawer front interface, especially on projects where the client will see the drawer interior — open-shelf kitchens, furniture-grade cabinetry, and showroom displays. Interior designers specifying TANDEMBOX by color family will call it out by finish to keep the drawer system's interior surfaces consistent. Homeowners doing a direct replacement on an existing TANDEMBOX installation can match their current system by confirming the nominal length and finish before ordering. This element is not for LEGRABOX, MERIVOBOX, or any other Blum platform, and it does not substitute for TANDEMBOX slide runners or front fixings.
It is a finishing element. It does not carry load or replace any structural TANDEMBOX slide or profile. The runners, side profiles, and front fixings handle the structural work; this part handles the visible reveal.
No. This design element is made for TANDEMBOX. LEGRABOX and MERIVOBOX use their own finishing components, which are not interchangeable with TANDEMBOX parts.
It is a 26 inch length, suited to TANDEMBOX drawers built to a 26 inch nominal depth. Confirm your drawer's nominal length before ordering; design elements must match the depth of the box they finish.
The sold-as unit for this SKU is not explicitly stated in the source data. Verify the quantity per pack before ordering to confirm whether you receive one element or a set for a single drawer.
A TANDEMBOX build in Gray stays consistent from the runner to the front interface when every finishing component is color-matched. This 26 inch Gray Metal Design Element closes the visible gap between front and profile, so the drawer reads finished from every angle.
Sold In: 1 Each
