NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR1636QUF1 to RSR1636QUF1.

Omega National 36 Inch Alder Wall Mount Hood Use

Omega National 36 inch Alder Select Series Wall Mount Range Hood is a between-cabinets wood range hood that creates a dedicated wood housing above the cooktop, which matters when matching custom cabinets in a kitchen run. The hood is part of Omega National's newest hood line of between-cabinets wood hoods, so it fits applications where cabinets flank each side of the cooking area. This Select Series Range Hood features a 6 inch apron, giving extra face height that can be decorated or profiled to line up with surrounding cabinet details. The alder wood construction supports staining or finishing to coordinate with other alder components in the kitchen. As a wall mount range hood in the wood range hoods category, it serves as the visible front structure while a separate ventilator handles airflow behind the metal liner.

Key Select Series Hood Details For Projects

• This Select Series Range Hood features a 6 inch apron, which provides vertical space on the front of the hood for trim work or shaping that ties into cabinet doors and moldings.
• The hood is available in 36 inch width, so it fits layouts designed around a 36 inch cooking area between upper cabinets in standard kitchen designs.
• Omega National's newest hood line of between-cabinets wood hoods is designed to sit between wall cabinets, allowing a continuous upper run with a dedicated wood focal point over the range.
• The hood comes with a silver metallic color metal liner, creating a defined interior cavity ready to receive a compatible ventilator while presenting a finished surface inside the hood opening.
• The metal liner is designed to accept Broan ventilator model NPRHVBB20SM rated 390CFM and NPRHVBF10SM rated 250CFM, so the liner layout matches these ventilators for straightforward fit-up.
• The product is sold in each quantities under manufacturer part number R1636QUF1, which simplifies specifying and reordering the same 36 inch alder Select Series hood and liner combination.

Installation-Focused Details For Wall Mount Fit

This Select Series Range Hood is described as a wall mount range hood, indicating it is intended to be mounted to a wall in a cooking area rather than from an island or ceiling, which aligns with typical between-cabinets layouts. The hood is a between-cabinets wood hood, meaning its outer dimensions and style coordinate with adjacent cabinets on both sides, supporting a clean visual joint at the wall. The 36 inch width aligns the hood body over common 36 inch ranges or cooktops, helping maintain centered alignment under upper cabinets. The metal liner inside the hood is designed to accept Broan ventilator model NPRHVBB20SM and NPRHVBF10SM, so the liner opening and attachment points are laid out to match those ventilators for a direct mechanical interface. The alder species allows finishing alongside alder cabinet frames, helping keep reveals and color consistent.

Using This 36 Inch Alder Hood In Real Kitchens

Where This Omega National Hood Works Best

This Omega National wood range hood fits kitchen runs where wall cabinets flank a 36 inch wide cooking zone and a wood focal point is preferred over metal. As part of Omega National's newest hood line of between-cabinets wood hoods, it is suited to installations that maintain continuous cabinet lines while adding a defined hood form. The 36 inch width matches common appliance sizes, allowing the hood to visually track the range or cooktop below without awkward overhangs or gaps. The alder Select Series construction supports projects built around alder cabinetry, which simplifies matching door frames, face frames, and crown profiles along the wall. As a wall mount range hood, it aligns with backing and structure in a finished wall, integrating into standard stud and cabinet layouts in many kitchens.

Why Select Series Details Support Repeatable Results

The Select Series Range Hood features a 6 inch apron, giving installers and shop fabricators predictable face height for adding mouldings, light rails, or applied trim that repeat from job to job. Because the hood is in the wood range hoods product class, it behaves like other wood components during finishing, so stain, sealer, and topcoat schedules can be coordinated with cabinet doors and frames. The hood comes with a silver metallic color metal liner, which establishes a consistent internal geometry that remains the same across installations using this model, helping ventilator placement stay repeatable. The liner is designed to accept Broan ventilator model NPRHVBB20SM at 390CFM and NPRHVBF10SM at 250CFM, so fabricators can design cutouts and duct transitions knowing the ventilator footprint is matched to the liner design. Sold in each units under part number R1636QUF1, the product can be referenced clearly on drawings and purchase documents, supporting consistent specification on multi-unit or repeat projects.

Installer Questions About This Omega National Hood

Choose This R1636QUF1 Hood For 36 Inch Runs

The Omega National 36 inch Alder Select Series Wall Mount Range Hood with Broan compatible silver metallic color metal liner suits projects calling for a between-cabinets wood range hood in alder. The 6 inch apron supplies a consistent decorative face, while the liner is designed to accept Broan NPRHVBB20SM and NPRHVBF10SM ventilators for defined mechanical fit. For cabinet runs built around a 36 inch cooking opening with alder components, the R1636QUF1 part number provides a clear way to specify this hood and liner combination on drawings and orders.