Omega National 30"W Alder Straight Accent Wall Mount Range Hood, Broan Compatible Liner Included - R5230SMB1QUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR5230SMB1QUF1 to RSR5230SMB1QUF1.

Omega Alder Straight Accent Wall Mount Range Hood

Omega National 30"W Alder Straight Accent Wall Mount Range Hood is a wood range hood that mounts on the wall and coordinates with kitchen cabinets for a unified run of wall units. The alder construction provides a paint-or-stain ready wood surface, so the hood face can match surrounding cabinetry finishes on site. This straight accent style creates a clean front profile, which supports simple alignment with adjacent cabinet faces during layout. As a wall mount unit in the wood range hoods category, it defines the focal point above the cooking area while maintaining a furniture-style cabinet look. The R5230SMB1QUF1 part number identifies this exact 30 inch wide by 36 inch high alder model, giving installers a specific reference when ordering multiple hoods for a project.

Key Range Hood Details For Cabinet Projects

• The 30 inch width matches common 30 inch cooking zones, so installers can center the hood over standard ranges and maintain consistent cabinet spacing on each side.
• The 36 inch height creates a tall wall presence, which helps integrate the hood into full-height cabinet layouts or tile fields without awkward transitions.
• Alder wood material accepts a wide range of stain or paint systems, allowing the hood body to track the same finishing schedule as nearby cabinet doors and face frames.
• The straight accent design forms a flat face area, which simplifies aligning stiles, rails, or applied trim with neighboring wall cabinets during installation.
• Branded as an Omega National Products wood range hood, the unit ties into an established line, which supports consistent styling across multiple kitchen zones.

Wall Mount Hood Layout And Fit Considerations

As a wall mount range hood, this Omega National 30"W alder straight accent model sets up directly on the wall, giving installers a fixed reference plane for aligning adjacent cabinets and crown. The 30 inch width supports layouts where a 30 inch cooking appliance is centered below, which helps maintain predictable filler sizes and door widths on either side. With a 36 inch height, the hood can bridge the space between base units and upper runs in many standard kitchens, helping planners maintain consistent vertical reveals above the range. The straight accent profile presents a squared front, so field scribing typically focuses on wall side adjustments rather than complex front contouring.

Using This Accent Wood Range Hood In Kitchen Runs

Where This Wood Range Hood Works In The Layout

This Omega National 30"W alder straight accent wall mount range hood is intended for wall locations above a cooking surface in kitchen cabinet runs. The wood range hoods category placement indicates it functions as the central upper element in a cooking zone, allowing nearby wall cabinets to tie into the hood on each side. The 30 inch width aligns well with a standard 30 inch cooking opening, which lets designers build symmetrical cabinet configurations around the hood centerline. With the 36 inch height, the hood can interact cleanly with surrounding cabinet heights or tile backsplashes, which helps produce a finished elevation that reads as a single planned assembly.

The accent wood range hood description shows that this model is designed to visually coordinate with kitchen cabinet components rather than stand apart as separate metal equipment. Because the unit is constructed in alder, the same species often used for custom cabinetry, finish crews can treat the hood surfaces as part of the cabinet finishing workflow. This simplifies stain or paint matching across doors, frames, and the hood body, reducing color variation between the cooking center and the rest of the wall. The straight front design adds a predictable geometric anchor in the elevation, which helps installers land moldings, side panels, or adjacent cabinet lines without having to work around irregular hood contours.

Why The Straight Accent And Broan Liner Matter

The straight accent style described in the web description allows the front of the hood to accept doors and accent panels of the installerâ??s choice, creating a mantel-style design tailored to each project. This means the hood face can carry the same door style used elsewhere in the kitchen, so the cooking center reads like an extended run of cabinetry rather than a separate structure. By supporting added panels, the hood gives designers flexibility to create deeper rails, decorative stiles, or over-mantel effects while still working from a defined 30 by 36 inch core footprint.

The product name notes that a Broan compatible liner is part of this Omega National 30"W alder straight accent wall mount range hood model, which means the wood hood is built to work with a Broan type liner size and shape. This alignment lets installers match an appropriate Broan compatible hood liner to the wood shell, so the decorative alder body can surround a metal liner that manages ventilation functions. The R5230SMB1QUF1 identifier ties the straight accent hood and Broan compatibility together under a single part number, which helps ordering and job documentation stay clear when multiple wood hood configurations appear on the same project.

Common Questions About This Omega Wood Range Hood

Select This Hood For Mantel Style Kitchen Runs

This Omega National 30"W alder straight accent wall mount range hood suits projects where the cooking center should read as part of the cabinet layout. With a 30 by 36 inch alder body, straight front design, and Broan compatible liner reference, it gives installers a defined framework for building a mantel-style focal point over standard cooking widths. For kitchens using alder cabinetry and wall-mounted ranges, this R5230SMB1QUF1 hood provides a coordinated wood structure that aligns with typical cabinet dimensions and finish processes.