Shelf & Countertop Supports Rigid, Heavy Duty - A And M Hardware, Inc. BULK - 5X8 BRN (10 EA PER BOX)

Workstation Bracket 5x8 Brown For Rigid Support

Workstation bracket 5x8 brown is a rigid, heavy duty cantilever support bracket from A and M Hardware, Inc. that supports shelves and countertops on workbenches, workstations, garage storage, ADA stations, and computer stations, so one bracket type covers many shop layouts. The bracket belongs to the workstation and countertop brackets class, so it is designed to carry horizontal work surfaces rather than light trim, which keeps benches and tops stable under typical shop loads. A 1,000 lb per pair load rating provides high capacity when pairs are spaced correctly, which matters when supporting heavy tools or dense materials on a work surface. The bracket is brown, so it blends with darker tops and wall finishes where a neutral support is preferred. The reversible design allows either orientation in the field, simplifying layout when surfaces run in different directions along a wall.

Heavy Duty Features That Support Daily Work

• The 1,000 lb per pair load rating provides strong support for shelves or countertops, so workbenches and stations can handle substantial weight without relying on multiple bracket styles.
• The cantilever support design carries the work surface from the wall side, which keeps the floor clear under workstations, ADA stations, and computer stations for foot or wheelchair access.
• Multiple 1/4" mounting holes per side give several fastener points on both wall and top interfaces, helping spread loads across studs or rails for more stable installations.
• The reversible design lets the bracket be oriented in either direction, which speeds layout when alternating between left and right wall conditions along a continuous run.
• A 3" x 3" - 45 degree notch on the six larger sizes provides clearance for a wall cleat and wire runs, so surfaces can mount over cleats while leaving space for electrical or data lines behind them.

Mounting Details For Workbenches And Stations

These cantilever support brackets use multiple 1/4" mounting holes per side, so installers can align fasteners to stud locations or wall cleats while fastening tops through the horizontal leg. That hole pattern supports straightforward drilling and fastening with common 1/4" mounting hardware where suitable. The 5x8 sizing is intended for workstation and countertop use, fitting typical narrow work surfaces in shops, garages, or office support areas. Because the design is rigid and heavy duty, the bracket stays stable once fastened, which is important when tops carry changing loads or equipment along their span.

Using Workstation Brackets Across Shop And Storage

Where This Cantilever Bracket Performs Best

This workstation and countertop bracket is described for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it suits both residential garages and commercial or institutional work areas. In a workbench or workstation, the 1,000 lb per pair load rating supports heavy tools, fixtures, or stacked materials, keeping work surfaces steady under frequent loading. In garage storage layouts, the same rating supports dense bins or supplies on countertops, so wall-mounted runs can act as sturdy staging areas. At ADA stations, the cantilever format provides support from the wall side while leaving floor space open, which helps maintain clear under-counter access. In computer stations, the rigid support keeps tops from sagging where equipment weight concentrates along the span.

Details That Help Achieve Consistent Installations

The rigid, heavy duty construction of this A and M Hardware, Inc. bracket provides a stable base once secured, so multiple brackets along a run behave consistently when tops are set and leveled. Multiple 1/4" mounting holes per side let installers choose fastener locations that land on structure or cleats, which helps align brackets along the wall without custom drilling. The reversible design means the same part can be used wherever a left or right orientation is needed, simplifying layout when alternating between positions under a continuous top. On the six larger sizes in the line, the 3" x 3" - 45 degree notch allows a wall cleat to sit behind the bracket leg while leaving a path for wire runs, keeping cleats and cabling behind the support. The brown finish coordinates with darker work surfaces, which gives a uniform appearance along visible workstation or computer station runs.

Common Questions About This Workstation Bracket

Selecting This Bracket For Workstation Projects

The BULK - 5X8 BRN part is a workstation and countertop bracket with a 1,000 lb per pair load rating, a cantilever layout, and multiple 1/4" mounting holes per side, so it suits heavy duty shelves and countertops in workbenches, workstations, garage storage, ADA stations, and computer stations where a brown, rigid support bracket is required.