Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Workstation bracket 12x18 brown pair describes cantilever support brackets rated at 1,000 lb per pair, so a properly supported set can carry substantial workstation or countertop loads without adding floor legs under the span. As rigid, heavy duty workstation and countertop brackets from A and M Hardware, Inc., they serve as the primary structural support under workbenches, workstations, garage storage shelves, ADA stations, and computer stations, turning wall structure into load-bearing support. The 12x18 size defines the bracket geometry so installers can plan support spacing and overhang while keeping within the stated rating per pair. The brown finish identifies the visual appearance, which matters when these brackets remain visible under tops in workstations or open storage areas. As part of the Workstation and Countertop Brackets class, they are intended for fixed, long-term countertop and shelf installations where load rating and rigidity are central to the layout.
These A and M Hardware, Inc. workstation and countertop brackets offer multiple 1/4 inch mounting holes per side, giving the installer defined hole sizes for selecting compatible fasteners and aligning to studs or blocking. The cantilever bracket format concentrates loads at the wall interface, so placing those 1/4 inch mounting points correctly becomes central to achieving the 1,000 lb per pair load rating in finished workbenches or ADA stations. Because the brackets are reversible, a single bracket form can be oriented to match left or right mounting conditions, which simplifies layout along a continuous wall run. The 12x18 dimension and heavy duty rating position these brackets for substantial countertops, garage storage shelves, or workstation tops where structural behavior and mounting pattern are closely connected.
These cantilever support brackets are described for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so their role centers on carrying horizontal work surfaces in fixed positions. In workbenches and shop workstations, the 1,000 lb per pair rating lets builders configure tops for tool loads, assemblies, or material staging while trusting a defined structural capacity at each pair. In garage storage scenarios, the same rating supports dense storage of bins or supplies along wall-mounted shelving runs using the Workstation and Countertop Brackets class as the primary support. In ADA stations, the cantilever format supports countertops without vertical obstructions at the front, which relates directly to clear knee and toe space beneath compliant surfaces. For computer stations, the rigid, heavy duty design keeps worktops stable under equipment, which matters when screens, towers, and peripherals rest on relatively narrow tops.
The 1,000 lb per pair load rating provides a quantifiable design input, so installers can repeat bracket spacing and layout from project to project while staying inside stated structural limits. Multiple 1/4 inch mounting holes per side simplify repeating a fastening pattern aligned with studs, because the installer can use the same hole positions every time a stud line is present. The reversible design means one physical bracket works for both right and left conditions, reducing variation in field stock and allowing consistent detailing along a long workstation or garage storage wall. Equal quantities of rights and lefts in each pair-based quantity keep spans visually symmetrical, which is important when several workstations or ADA stations run side by side in a commercial or institutional setting. On the six larger sizes, the 3 inch by 3 inch 45 degree notch that allows wall cleat and wire run clearance lets installers repeat a standard cleat and wiring scheme behind countertops without revising bracket geometry, supporting standardization across multiple rooms or bays.
These workstation and countertop brackets have a load rating of 1,000 lb per pair, which sets the structural capacity used when planning countertop spans and workstation loading.
These cantilever support brackets are described for workbenches, workstations, garage storage, ADA stations, and computer stations, focusing their use on fixed horizontal work surfaces.
The 12x18 designation identifies the bracket size, helping installers match support geometry and layout to the depth and projection required for countertops or shelves.
Multiple 1/4 inch mounting holes per side provide predefined fastener locations, helping align the bracket with framing or structural substrates during workbench or station installation.
The bracket design is reversible, so a single bracket form can be oriented for right or left mounting, simplifying field layout along continuous countertop or storage runs.
On the six larger sizes, a 3 inch by 3 inch 45 degree notch allows wall cleat and wire run clearance, aiding layouts where cleats or wiring run behind countertops.
The A and M Hardware, Inc. workstation bracket 12x18 brown pair combines a 1,000 lb per pair load rating with cantilever support, positioning it for serious workbenches, ADA stations, garage storage, and computer stations. The 12x18 sizing, reversible design, and multiple 1/4 inch mounting holes per side give clear structural and fastening details, which matter when repeating layouts across several stations or storage runs. For projects built around the Workstation and Countertop Brackets class, this brown 12x18 pair offers a defined, heavy duty bracket choice ready to support fixed countertops and shelves in demanding environments.
Sold In: 1 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3 Pair |  AH2424PRIMED-B Mfr# BULK - 24X24 PRIMED (6 EA PER BOX) | Shelf & Countertop Supports Rigid, Heavy Duty - A And M Hardware, Inc. BULK - 24X24 PRIMED (6 EA PER BOX) |