
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
workstation bracket 15x21 brown pair is a rigid, heavy duty support from A and M Hardware, Inc. designed for workstation and countertop bracket applications. The bracket pair is rated at 1,000 lb per pair, so it carries substantial loads in workbenches, workstations, garage storage, ADA stations, and computer stations. The cantilever support design projects from the mounting surface to hold countertops, shelves, or benchtops while keeping the area below open for legroom or storage space. Multiple 1/4 inch mounting holes per side give several fastening points on each leg, spreading load forces across the structure for stable, solid installation on properly prepared framing or casework. This model is specified as 15X21 in brown, so it aligns with jobs calling for a brown workstation and countertop bracket where both appearance and heavy load support are required.
The workstation and countertop bracket pattern offers multiple 1/4 inch mounting holes per side, which supports flexible fastener placement into studs, wall cleats, or bench framing so installers can match existing structure. The 3 inch by 3 inch 45 degree notch on the six larger sizes allows clearance for a wall cleat and wire run, so cleats used to reinforce the wall or manage alignment can sit behind the bracket leg while electrical or data lines route through the same area. Because the design is reversible and supplied as equal quantities of rights and lefts, the installer can orient each bracket to work around cleats or conduits while maintaining a consistent support grid under the work surface.
This A and M Hardware, Inc. workstation and countertop bracket pair is identified as 15X21 in brown and specified as a workbench, workstation, garage storage, ADA station, and computer station support. The load rating at 1,000 lb per pair fits applications where a benchtop, solid countertop, or equipment shelf must handle substantial static loads along a wall or frame. In workbenches and workstations, the cantilever design supports tops while keeping leg space open for seating or tool storage under the surface. In garage storage or computer stations, the same cantilever arrangement carries storage platforms or equipment tops without relying on floor posts, which matters when floor area must stay clear for vehicles, carts, or chairs. For ADA stations, the wall-mounted cantilever layout supports surfaces while allowing wheelchair clearance because structural support is concentrated at the wall or backing instead of along the front edge.
The multiple 1/4 inch mounting holes per side on these workstation brackets give several options to anchor each leg, which helps align fasteners with studs, wall cleats, or support rails so loads transfer into solid backing on every install. The reversible design and pairing of equal quantities of rights and lefts let installers alternate orientations along a run, which can help align the diagonal strut relative to studs, cleats, or wire paths without changing bracket type. When using the six larger sizes, the 3 inch by 3 inch 45 degree notch permits a wall cleat and wire run to pass behind the bracket, which keeps reinforcement and routing elements in the wall plane instead of interrupting the work surface edge. The brown finish and workstation and countertop bracket classification tie this part to projects needing a consistent appearance along visible support lines while still benefiting from the 1,000 lb per pair load rating in repeated, similar installations.
The workstation bracket 15X21 brown pair is described for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it fits wall or frame mounted tops in those environments.
The cantilever support brackets have a load rating at 1,000 lb per pair, so two brackets sharing a span are designed to support up to that stated load when properly fastened to suitable structure.
The multiple 1/4 inch mounting holes per side allow several fasteners on each leg, spreading forces into studs, cleats, or rails and helping align attachment points with available structure during layout.
On the six larger sizes, the 3 inch by 3 inch 45 degree notch allows clearance for a wall cleat and wire run, so reinforcement lumber and wiring can pass behind the bracket leg without alteration.
The reversible design makes brackets versatile and easy to use, because each piece can be flipped to work as a right or left, adapting to stud positions or obstructions without changing part numbers.
The product is described as a pair, so each purchase provides two workstation and countertop brackets that function together to support a shared work surface or span in the rated application.
The A and M Hardware, Inc. workstation bracket 15X21 brown pair combines a 1,000 lb per pair load rating with a cantilever support layout for workbenches, workstations, garage storage, ADA stations, and computer stations. Multiple 1/4 inch mounting holes per side and a reversible right and left design support flexible spacing to align with studs, cleats, or rails across a run. For installations needing a brown workstation and countertop bracket that handles significant static loads while leaving space clear beneath the surface, this 15X21 pair is suited to that role.
Sold In: 1 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3 Pair | AH2424PRIMED-B Mfr# BULK - 24X24 PRIMED (6 EA PER BOX) | Shelf & Countertop Supports Rigid, Heavy Duty - A And M Hardware, Inc. BULK - 24X24 PRIMED (6 EA PER BOX) |