
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
workstation bracket 18x18 brown from A and M Hardware, Inc. is a rigid, heavy duty cantilever support bracket designed for workbenches, workstations, garage storage, ADA stations, and computer stations, so one bracket pair can serve many shop and facility layouts. The bracket belongs to the workstation and countertop brackets product class, so it is built for supporting horizontal surfaces rather than light shelving, which helps when planning heavier duty stations. With an 18 inch by 18 inch format, it provides a substantial bearing area beneath countertops or shelves, giving stronger leverage against downward loads. The brown finish gives a uniform appearance that blends easily in many workshop and storage environments, keeping installations visually consistent across multiple stations.
These workstation and countertop brackets offer multiple 1/4 inch mounting holes per side, so fastener placement can be chosen along the wall and under the top to match framing or substrate conditions. Having several 1/4 inch mounting locations per leg lets installers spread the connection over more points, which helps transfer the 1,000 lb per pair rating into the supporting structure. Cantilever support geometry keeps the structure against the wall while projecting under the work surface, freeing space beneath for storage, knee clearance, ADA access, or equipment placement. Brown finish on the 18x18 bracket keeps visual lines clean where legs are visible along walls, coordinating with other dark-toned shop or storage components.
This heavy duty workstation bracket supports workbenches in shops where tools, fixtures, or materials demand a 1,000 lb per pair load rating, so bench layouts can carry significant weight along the wall. In workstations and computer stations, the 18x18 geometry reaches under tops with enough projection to support deeper worksurfaces, keeping the underside open for seating or cable routes. Garage storage runs benefit from using a cantilever support bracket rather than floor legs, opening floor space under shelves while still using a bracket rated at 1,000 lb per pair for dense items. ADA stations gain from the cantilever format because supports stay at the wall, which helps maintain clear space beneath the surface. The bracket also suits general countertop runs where rigid, heavy duty support is needed along a framed wall or structural panel. Equal quantities of rights and lefts help set mirrored bracket positions along these installations, keeping each support pair oriented consistently.
The load rating at 1,000 lb per pair reduces the need to overspec additional support parts along a run when designing heavy duty workbenches or storage stations, so layouts can be drawn using known capacity per bracket pair. Multiple 1/4 inch mounting holes per side offer flexibility to align fasteners with studs, blocking, or structural members, which helps transfer loads more directly into the wall and underside of the top. The reversible design means one bracket pattern works in more orientations, so installers can flip or rotate units to work around wall cleats, conduits, or other features without changing the hardware schedule. On the six larger sizes, the 3 x 3 - 45 degree notch providing wall cleat and wire run clearance allows trim cleats or wires to pass behind or through, avoiding unnecessary cuts in the bracket and preserving strength. Being part of the workstation and countertop bracket class keeps this product focused on supporting horizontal work surfaces, which simplifies standardizing bracket types across benches, ADA stations, and computer stations in the same facility. The brown finish keeps the 18x18 bracket visually consistent when exposed, supporting a coordinated look along walls of workstations or storage bays.
This workstation and countertop bracket has a load rating at 1,000 lb per pair, so a properly mounted pair can support heavy work surfaces and stored items along a wall.
These cantilever support brackets are for use in workbenches, workstations, garage storage, ADA stations, and computer stations, covering many common shop and facility work areas.
The multiple 1/4 inch mounting holes per side let installers choose fastener positions that match studs or blocking, improving load transfer and layout flexibility.
The reversible design makes brackets versatile and easy to use by allowing orientation changes in the field, which helps work around wall conditions without changing parts.
On the six larger sizes, the 3 x 3 - 45 degree notch allows for wall cleat and wire run clearance, so trim or services can pass without cutting into the bracket.
This workstation and countertop bracket class suits horizontal work surfaces such as benches, counters, ADA stations, and similar layouts needing rigid, heavy duty support.
The A and M Hardware, Inc. PKGD-18X18 BROWN workstation and countertop bracket pairs a 1,000 lb per pair load rating with cantilever support for workbenches, workstations, garage storage, ADA stations, and computer stations, bringing one bracket style across many layouts. Multiple 1/4 inch mounting holes per side, reversible design, and equal quantities of rights and lefts support flexible placement and mirrored installations along walls. For projects needing rigid, heavy duty brown brackets in the 18x18 format, this workstation bracket 18x18 brown offers a focused option for building consistent, load-capable stations.
Sold In: 1 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3 Pair | AH2424PRIMED-B Mfr# BULK - 24X24 PRIMED (6 EA PER BOX) | Shelf & Countertop Supports Rigid, Heavy Duty - A And M Hardware, Inc. BULK - 24X24 PRIMED (6 EA PER BOX) |