White Melamine Panel 3/4 X 49 X 97 Use

white melamine panel 3/4 x 49 x 97 identifies this Tafisa Canada, Inc. board as a full-size white melamine panel, so it serves well where a consistent white surface and standard panel dimensions are required. The 3/4 inch stated thickness supports projects calling for that common board thickness, which helps align this panel with many established cabinet and furniture construction dimensions. The 49 x 97 inch stated size signals an oversized sheet format, which gives a bit more usable panel width and length for cutting layouts compared with a 48 x 96 sheet. The melamine category designation places this product among board panel products, so it fits applications where a manufactured panel surface and core are preferred over solid lumber. The WHITE description defines the color tone, which matters when coordinating with other white components specified in a job.

Key Tafisa Melamine Board Job Advantages

• The Tafisa Canada, Inc. brand designation ties this panel to the Tafisa board product line, which benefits shops that standardize on Tafisa surfaces for consistent appearance across multiple projects.
• The product class listing as Tafisa groups this panel with other Tafisa board panel products, helping maintain uniform material selection when a project submittal or specification calls for Tafisa materials throughout.
• The G2S reference in the description identifies this as a two-sided panel, which supports layouts where both faces of the sheet may be visible in use and need a consistent white presentation.
• The EVOLO term in the description identifies this specific finish series, which matters when a job calls out EVOLO surfaces so that replacement sheets match existing Tafisa EVOLO components.
• The ULEF term in the description identifies this board variant as ULEF, which is important for projects that specify ULEF materials in their written requirements or internal standards.

Panel Format And Layout Planning Details

The stated 49 inch width of this Tafisa melamine panel offers an extra inch over a 48 inch sheet, which can assist with nested cutting patterns where a slightly wider blank reduces offcut waste. The 97 inch length similarly adds one inch beyond 96, which may help layout when components are designed around full-height parts derived from this length. The 3/4 inch thickness notation keeps this panel in line with many standard casework and shelving thickness expectations, simplifying coordination with other 3/4 inch components on the same project. The G2S designation notes that both faces are surfaced, so cutting patterns can treat either face as an exterior or visible side during fabrication.

Applying Tafisa EVOLO ULEF Board In Work

Where This Tafisa White Panel Fits Best

This panel is identified as a Board Panel Products | Melamine item, so it aligns with work that relies on manufactured board panels instead of solid wood. The white color and G2S designation suit projects where both faces are expected to be finished in a consistent white tone, such as partitions or components with two visible sides. The 3/4 x 49 x 97 dimensions fit workflows that favor full sheet processing, where standard 3/4 inch thickness and slightly oversized width and length support optimized cutting plans. The Tafisa Canada, Inc. brand and Tafisa product class connect this panel to the broader Tafisa system, which assists when a specification or prior installation already uses Tafisa materials and needs continuity.

Details That Support Repeatable Cutting Results

The precise notation of 3/4 inch thickness gives fabricators a defined starting point for machine setup, which helps coordinate saw settings, edgeband programs, and joinery dimensions around that nominal thickness. The 49 inch width and 97 inch length provide known sheet dimensions, which aids software-driven optimization or manual layout by allowing consistent assumptions about the usable field on every sheet. The white surface color specified in the description simplifies visual matching when projects rely on the same white tone across multiple components, reducing the risk of mismatched shades during replacement or expansion work. The pairing of EVOLO and ULEF in the description differentiates this panel variant from other Tafisa offerings, helping shops repeatedly reorder the same TA178A2S75048EVOLO specification for future phases or service work.

Common Questions About This Tafisa Melamine Panel

Selecting This Tafisa Panel For Your Next Job

The WHITE, 3/4X49X97, G2S-EVOLO-ULEF Tafisa TA178A2S75048EVOLO panel from Wurth Baer Supply provides a defined white melamine board format identified by manufacturer part BTUFA00006. The 3/4 inch thickness and 49 x 97 inch size support full-sheet processing with familiar dimensions. The Tafisa branding and EVOLO ULEF designation help align with written material specifications using those terms. When a project calls for a white Tafisa melamine board in this configuration, this panel provides a clearly identified option for consistent material selection.