Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #6 x 3/4-inch pan head screw is purpose-built for mounting European cup hinges, drawer slides, and other cabinet hardware to face-frame and frameless cabinet panels. The 3/4-inch length is matched to the shallow mounting depth that cabinet hardware requires, seating the head flush against the mounting plate without over-penetrating the panel.
European cup hinges and side-mount drawer slides rely on short screws that pull the mounting plate tight against the panel without penetrating too far. At 3/4 inch, this screw handles that job cleanly whether you are threading into a 5 mm line-bore hole on a frameless cabinet or driving into a face-frame stile. It also works for other cabinet hardware with pre-bored mounting holes: shelf pin standards, drawer guide clips, and similar hardware that spec a #6 screw in the same depth range. Packed 1,000 to the box, it is a practical volume option for cabinet shops and installers who are setting hardware across a full kitchen or bath run.
The pan head profile sits flat against the hardware mounting plate, distributing the clamping load evenly across the plate face. That matters on hinge plates and drawer slide brackets, where a countersunk head would either miss the countersink geometry or pull the plate out of position. The bright zinc finish is standard for interior cabinet work, where the fasteners live inside a dry box and cosmetic consistency with the surrounding hardware matters more than heavy corrosion protection.
Cabinet installers and shop crews setting hinges and slides across a large job need a screw they can load once and run through every mounting point without hesitation. The #2 Phillips drive matches the bits already in most drivers, and the coarse thread starts quickly in the panel materials that make up most cabinet boxes: plywood, particleboard, and MDF. This is a dedicated hardware installation screw, not a general-purpose wood screw, and the geometry reflects that. The head seats against the plate. The length stops short of the panel face. The point starts in the hole without wandering.
Most European hinge mounting plates and drawer slide brackets are designed for a short screw that pulls the plate tight without punching through or weakening the panel face. At 3/4 inch, this screw provides solid thread engagement in the panel while staying within the mounting geometry the hardware is designed around.
Yes. European hinge mounting plates and drawer slide brackets are designed for a flat-bearing pan head, not a countersunk head. The pan head seats against the plate face and holds it flush against the cabinet panel.
Coarse thread grips well in plywood, particleboard, MDF, and solid wood, which are the panel materials used in most cabinet boxes. It is not the right choice for metal studs or pre-tapped metal hardware that requires machine threads.
No. The bright zinc finish is rated for dry indoor environments. It is the right choice for cabinet interiors in controlled conditions, not for areas with ongoing moisture exposure.
The manufacturer part number is 6109. Use that reference when reordering or matching this screw across a project.
Choosing the correct length and head style for hardware installation is what keeps hinges aligned and slides tracking true. This #6 x 3/4-inch pan head screw is built for that specific job, so the hardware sits where you set it.
Sold In: 1000 Each