Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #6 x 5/8-inch pan head hinge and drawer slide installation screw is built for mounting European cup hinges, side-mount drawer slides, and other cabinet hardware to the interior faces of 3/4-inch cabinet panels. At 5/8 inch, it bites deeper into the panel than shorter installation screws while staying well clear of the panel face, giving hardware mounting plates a firm, lasting seat.
Hinge mounting plates and drawer slide brackets are bored to accept screws at specific intervals, and the screw length determines how much thread actually engages the panel. A 5/8-inch screw reaches past the hardware plate and into solid panel material, giving the fastener more to hold onto than a shorter screw that barely clears the plate thickness. In a 3/4-inch cabinet side or face frame, 5/8 inch provides reliable pull-out resistance without any risk of breaking through the opposite face. For shops installing European hinges or under-cabinet drawer slides in standard 3/4-inch plywood or MDF carcasses, this length hits the right balance between grip and safety margin.
The pan head profile sits flat against hinge plates and slide mounting brackets, spreading the clamping load evenly across the hardware without requiring a countersink. Fine thread is the correct choice here: it produces closer thread spacing in hardwood and plywood panel materials, where a coarser thread would provide less surface contact and reduced holding power in dense grain. The zinc finish handles the dry, climate-controlled conditions inside a finished cabinet without issue. These are interior hardware screws, and zinc is the appropriate protection level for that environment.
This screw fits neatly into any production workflow where European hinges and drawer slides are going in at volume. The #2 Phillips drive means no special bits are needed, and the sharp point self-starts in the pre-bored holes already present in most hinge plates and slide brackets. Cabinet shops running a production line, contractors installing pre-built boxes on site, and millwork teams finishing custom casework all benefit from having a dedicated, correctly sized hardware installation screw rather than pulling from a general-purpose box and guessing at length.
The 5/8-inch length gives more thread engagement in the panel behind the hardware plate. In a standard 3/4-inch cabinet panel, it reaches past the mounting plate thickness and into solid material, providing better pull-out resistance than a screw that barely clears the plate.
Yes. Standard European hinge mounting plates and most drawer slide brackets are designed to accept a pan head screw that bears flat against the hardware surface. No countersinking is required.
Fine thread performs well in plywood and hardwood panel materials because the closer thread spacing increases contact surface and holding power in dense substrates. For softwood or particleboard, a coarser thread typically provides better pull-out resistance.
This screw is sized for hardware mounting into panel stock. Whether it is a carcass side panel or a face frame member, the key factor is material thickness: 5/8 inch is well suited to 3/4-inch stock where you need thread engagement without breakthrough.
The zinc finish is suited to dry indoor cabinet environments. These are interior hardware installation screws and are not intended for outdoor, high-humidity, or wet-area applications.
A correctly sized installation screw is the small detail that keeps hinges tight and drawer slides tracking true through years of daily use. The Würth #6 x 5/8-inch pan head installation screw gives cabinet shops and installers a reliable, purpose-matched fastener for the job, packed 1,000 to a box so production never stalls.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW44130 Mfr# 3670000427961 1000 | Würth #8 x 1/2" Pan Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Fine Thread Zinc, 3670000427961 1000 - 1000/Box | ||||
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) | ||||
Sold in: 1000 Each |  WW44060 Mfr# 3670000011961 1000 | Würth #6 x 1/2" Pan Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Fine Thread Zinc, 3670000011961 1000 - 1000/Box |