Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #8 x 1/2" pan head screw is built for one job: mounting European hinges, drawer slides, and similar cabinet hardware to interior panels. The fine thread, sharp point, pan head, and #2 Phillips drive make it a practical everyday screw for cabinet shops and installers working with pre-drilled hardware mounting plates.
European cup hinges and drawer slides come with pre-drilled mounting plates sized for a specific gauge screw. The #8 gauge and 1/2" length on this screw are matched to that hardware, seating the pan head flush against the plate surface without pulling through or standing proud. The fine thread engages cleanly as the screw seats, which helps prevent the plate from shifting during tightening. For cabinet shops installing hinges and slides at volume, a screw purpose-built for this task drives more consistently than a general-purpose wood screw used out of convenience.
The bright zinc plating on this screw is appropriate for the dry indoor conditions inside a finished cabinet. Hardware mounting screws on hinge plates and drawer slide brackets are hidden once the door or drawer is in place, so corrosion protection for interior use is what matters here. This screw is not intended for exterior applications or high-humidity environments.
Cabinet shops running production lines need a reliable supply of hardware mounting screws that drive consistently and fit standard hinge and slide plates without sorting through a mixed bin. Installers working on finished cabinets in the field need a screw that starts without splitting the panel face and seats without over-driving. This box of 1,000 covers both situations, keeping installation moving without frequent restocking interruptions.
Yes. The #8 gauge, 1/2" length, and pan head profile are matched to the mounting plates on most European cup hinges. Check that your specific hinge plate specifies an #8 gauge screw before ordering.
Fine thread provides more controlled engagement in the tight, pre-drilled holes of hinge and slide mounting plates. It is less likely to strip the hole or displace material around the plate opening during installation.
This screw is sized for hardware mounting plate installation, where the plate carries the load rather than the screw threading into raw panel material. For direct fastening into particleboard or MDF without a hardware plate, a coarse-thread chipboard screw is a better fit.
The sharp point starts in wood panel material without a pre-drilled pilot hole. When driving through a hardware mounting plate into a panel, the plate's pre-drilled hole guides the screw automatically.
No. The zinc finish is rated for dry indoor environments. For exterior or high-humidity applications, choose a screw with a galvanized or other corrosion-resistant coating rated for that exposure.
A box of 1,000 Würth #8 x 1/2" pan head hinge and drawer slide screws means the right hardware mounting screw is always on the bench, ready when the next run of doors and drawers starts.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW44165 Mfr# 3670000012961 1000 | Würth #6 x 5/8" Pan Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Fine Thread Zinc, 3670000012961 1000 - 1000/Box | ||||
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) | ||||
Sold in: 1000 Each |  WW44060 Mfr# 3670000011961 1000 | Würth #6 x 1/2" Pan Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Fine Thread Zinc, 3670000011961 1000 - 1000/Box |