Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #6 x 1/2" hinge and drawer slide installation screw is a short, fine-thread pan head fastener built for mounting European cup hinges, side-mount drawer slides, and similar cabinet hardware to 3/4-inch panels without over-penetrating the substrate.
The 1/2" length is the right choice when the hardware mounting plate sits directly against a 3/4" panel face and penetration depth needs to stay well clear of the opposite face. European cup hinges and most side-mount drawer slides ship with pre-drilled holes sized for a #6 screw, and the 1/2" shank keeps the fastener fully engaged in the panel face without risking blowout on the inside surface of a finished cabinet side. For installers mounting hinges on face-frame cabinets or hanging slides in a 3/4" plywood box, this length eliminates the guesswork on penetration depth.
The pan head profile bears evenly against the flat surface of hinge plates and drawer slide brackets, distributing the clamping load without countersinking. Fine thread is the correct choice here: the denser fiber structure of hardwood plywood faces and MDF resists coarse threads and can strip under repeated hardware adjustment cycles, while fine thread holds its grip. Zinc plating provides standard corrosion protection suited to the controlled indoor environment of a cabinet interior or face frame, where hardware is installed once and stays put.
Cabinet shops running production lines go through hinge and drawer slide screws in volume, and a 1000-count box keeps the bin full through a multi-cabinet run without a mid-job reorder. Installers who bring their own hardware to the job site find the short 1/2" length handles face-frame hinge work and drawer slide mounting without needing a second screw size. Designers and homeowners doing a hardware swap on existing cabinets get consistent results using the same screw the original shop would have specified.
Yes. European cup hinges use pre-drilled mounting holes sized for a #6 screw, and the pan head seats flat against the hinge plate. The 1/2" length is appropriate for mounting directly into a 3/4" cabinet panel face.
Fine thread engages more material per inch of shank in dense substrates like hardwood plywood and MDF. It also holds up better through hinge adjustment cycles, where the screw may be backed out and re-driven more than once.
Yes. A #2 Phillips bit in any cordless drill or driver handles this screw. Keep the clutch setting moderate to avoid over-driving the short shank into thin hardware plates.
Yes. The pan head bears against the drawer slide mounting bracket, the #6 shank fits standard slide hardware holes, and the 1/2" length stays within the panel face on a 3/4" plywood side.
The sharp point self-starts in most cabinet panel materials. When driving into hardwood face frames or close to an edge, a small pilot reduces the risk of splitting the stock.
Matching the screw to the hardware means hinges seat flat, slides mount square, and the job moves without stops to sort out the wrong fastener. This 1000-count box of Würth #6 x 1/2" pan head screws keeps the right screw within reach from the first hinge to the last drawer slide.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW44165 Mfr# 3670000012961 1000 | Würth #6 x 5/8" Pan Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Fine Thread Zinc, 3670000012961 1000 - 1000/Box | ||||
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) | ||||
Sold in: 1000 Each |  WW44130 Mfr# 3670000427961 1000 | Würth #8 x 1/2" Pan Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Fine Thread Zinc, 3670000427961 1000 - 1000/Box |