Rev-A-Shelf pullout shelf gives under-sink storage a more usable layout by working around common plumbing obstructions. This under sink organizer from Rev-A-Shelf Corporation is a U-shaped wire basket built for sink base cabinets that need access without blocking pipes. The chrome pullout basket uses heavy-gauge wire construction and rides on full-extension soft-close slides for smooth movement. Model RS5786-30CR is sized at 29-1/2 inches wide, 21-29/32 inches long, and 5-1/2 inches high. The pullout basket can be door mounted, and the product data also states it can be bottom or side mounted. For installers and serious DIY buyers, that combination helps when cabinet conditions vary and clear access under the sink matters.
Key specs to confirm: This under sink organizer is the Rev-A-Shelf 5786 Series chrome pullout shelf, model 5786-30CR, with a verified size of 29-1/2 inches wide, 21-29/32 inches long, and 5-1/2 inches high. The product data states the U-shaped frame is designed to fit around plumbing and that the series comes in two sizes to accommodate 33 inch and 36 inch sink base cabinets. Before purchase, confirm your actual interior cabinet width, usable depth, door clearance, and the exact location of drain lines, shutoff valves, disposal bodies, or other obstructions. Load rating, compliance details, and any other unlisted technical limits should be confirmed with the manufacturer or technical documentation.
What's included: Verified included items are the pull out undersink U-shaped wire basket, full-extension soft-close slides, and bottom and side mount brackets. Door mount capability is stated in the product data.
What to verify before ordering: Check sink base cabinet size, interior opening, plumbing path, door swing, and whether bottom, side, or door-mounted installation is the right approach for your cabinet. Confirm that the 29-1/2 inch shelf width and 21-29/32 inch length work with your available clear space.
Under-sink storage often fails for a simple reason: pipes, traps, valves, and disposals interrupt the center of the cabinet. A flat shelf can waste space or block access, while loose bins tend to get pushed behind plumbing where they are hard to reach. This U-shaped wire basket is built for that exact problem. The Rev-A-Shelf chrome pullout shelf uses a U-shaped frame that leaves room for common sink plumbing while still creating usable storage on both sides and toward the rear.
For an installer working on a kitchen refresh, this can help turn a difficult sink base into organized storage for cleaning supplies, cloths, and other routine items. For a serious DIY buyer replacing a fixed tray or a basic basket, the pullout format improves reach because the unit rides on full-extension soft-close slides. That means stored items move outward instead of staying buried behind the face frame or under the sink bowl.
The verified dimensions matter here. Model RS5786-30CR measures 29-1/2 inches wide, 21-29/32 inches long, and 5-1/2 inches high. Those numbers give buyers a direct starting point for fit checks. The series description also states that these U-shaped wire baskets are made to accommodate 33 inch and 36 inch sink base cabinets, but buyers should still confirm actual interior cabinet dimensions and obstruction locations. Cabinet construction can vary, and plumbing is rarely centered exactly the same way from one job to the next.
This rev a shelf pullout basket also offers mounting flexibility. The web description states that bottom and side mount brackets are included for painless installation, and the product can be bottom or side mounted. Door mount capability is also part of the verified product name and description. That range of mounting options can help when the cabinet floor, side walls, or door setup make one method more practical than another. Before install, confirm clearance for slide travel, door movement, and any hardware already inside the sink base.
When buyers compare under-sink storage products, the main differences usually come down to access, obstruction clearance, and installation flexibility. A generic tray may store items, but it does not necessarily work well around plumbing. A fixed shelf can leave dead space. A pullout basket with the wrong shape may interfere with pipes or reduce usable capacity. This Rev-A-Shelf under sink organizer addresses those common issues with a U-shaped wire basket layout and full-extension soft-close slides.
The heavy-gauge chrome wire construction gives the basket an open form that makes contents visible without removing the unit. That is useful in busy kitchen cabinets where quick identification matters. The full-extension slide travel helps bring stored items forward, which can reduce reaching around pipes or into the back of the cabinet. Soft-close slide action also supports controlled movement during daily use.
Another practical point is mounting flexibility. This product data verifies that the unit can be bottom or side mounted and that brackets for those methods are included. That can make planning easier when one cabinet has a suitable floor surface and another has side panel conditions that better support a different approach. Door mount capability is also part of the verified description, which may help buyers planning an integrated access setup.
For consistency, buyers often prefer a known cabinet accessory brand when replacing or specifying a pullout. Rev-A-Shelf is clearly identified in the verified product data, and the 5786 Series details give a defined use case rather than a general storage claim. Even so, the final buying step should always be a fit check. Confirm cabinet opening, interior depth, plumbing path, and mounting surface conditions before ordering any under sink organizer, including this revashelf basket.
This Rev-A-Shelf U-shaped wire basket is designed to work around plumbing obstructions, but actual pipe and valve locations must be checked in your cabinet before ordering.
This 5786 Series pullout is described as accommodating 33 inch and 36 inch sink base cabinets, and the exact interior dimensions should be confirmed on site.
RS5786-30CR measures 29-1/2 inches wide, 21-29/32 inches long, and 5-1/2 inches high according to the verified product data.
This Rev-A-Shelf pullout shelf is listed as door mount, and the verified description also states door mount capability for the unit.
This under sink organizer can be bottom or side mounted, and bottom and side mount brackets are included in the verified product description.
This chrome pullout basket uses full-extension soft-close slides, which are designed to bring the basket outward for easier access.
This Rev-A-Shelf basket uses heavy-gauge chrome wire construction as stated in the verified product data.
Load rating and compliance details are not provided in the verified product data, so those points should be confirmed with the manufacturer documentation.
This pullout basket requires checks for cabinet width, usable depth, door clearance, slide travel, and the path of plumbing or other obstructions. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf chrome pullout shelf is a practical choice when you need under-sink storage that works around plumbing and slides out for access. The verified package includes the U-shaped wire basket, full-extension soft-close slides, and bottom and side mount brackets. Before purchase, confirm your sink base size, interior clearances, obstruction layout, and whether door mount, bottom mount, or side mount fits your cabinet plan. A careful fit check helps ensure the RS5786-30CR basket installs cleanly and functions as intended.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RS5786-33CR Mfr# 5786-33CR | Rev-A-Shelf 5786 Series Chrome Pullout Shelf, 32-1/2"W x 21-29/32"L x 5-1/2"H, Door Mount - 5786-33CR |