Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf pullout shelf gives under-sink storage a defined place around plumbing obstructions. This under sink organizer from Rev-A-Shelf Corporation is a U-shaped wire basket made for sink base cabinets and sized at 32-1/2 in. wide x 21-29/32 in. long x 5-1/2 in. high. The chrome pullout basket uses soft-close slides and full-extension travel to bring stored items forward for easier access. Model RS5786-33CR is also a door mount design, and it can be bottom mounted or side mounted based on the cabinet layout. For buyers comparing rev a shelf and revashelf part searches, this product is a pullout undersink basket in the 5786 Series with heavy-gauge chrome wire construction.
Key specs to confirm: This under sink organizer is listed at 32-1/2 in. wide, 21-29/32 in. long, and 5-1/2 in. high. The product description states that the 5786 Series comes in sizes for 33 in. and 36 in. sink base cabinets, and this specific model is 5786-33CR. Before ordering, confirm your sink base cabinet size, clear interior width, usable depth, and the exact location of drain lines, shutoff valves, disposal units, and other obstructions. Also confirm whether bottom mount or side mount installation is the better method for your cabinet. Load rating, compliance details, and any other safety information are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified included items are bottom and side mount brackets. The product also includes full-extension soft-close slides as part of the pullout basket assembly.
What to verify before ordering: Check cabinet opening size, interior depth, door clearance for a door mount setup, plumbing path through the U-shape, and whether your cabinet construction supports the chosen mounting method. Confirm all needed hardware details in current manufacturer documentation if your installation requires project-specific fasteners or spacing.
Under-sink storage often fails for one simple reason: plumbing breaks up the center of the cabinet and leaves awkward pockets on each side. A pullout undersink basket addresses that problem by using a U-shaped frame that works around the pipe area instead of trying to occupy the same space. For installers, remodelers, and serious DIY buyers, that means less wasted room and easier access to cleaners, sponges, bottles, and other sink-base items.
This Rev-A-Shelf wire basket is built for that exact use case. The heavy-gauge chrome wire construction keeps contents visible, which matters in a low-light sink cabinet where small items get lost quickly. The full-extension soft-close slides bring the basket out of the cabinet so the back area is easier to reach. That is useful in a kitchen or bath cabinet where fixed shelves leave items trapped behind plumbing or behind one another.
The door mount format can also help create a more direct pullout action, but buyers should verify door clearance and mounting position before ordering. In some cabinets, a door mount setup may depend on hinge placement, interior framing, or nearby sink components. Because this product can be bottom mounted or side mounted, it gives installers flexibility when the cabinet floor or side walls are the better anchor point. That flexibility is helpful when one mounting surface is blocked or less practical.
Model RS5786-33CR is described for 33 in. sink base cabinets. Even with that stated application, the buyer should still confirm actual interior measurements because sink bases can vary based on wall thickness, hardware, and plumbing layout. If you are searching revashelf or rev a shelf parts by model number, this product is a chrome pullout basket intended to improve access in the under-sink area rather than a pantry organizer or a standard base cabinet shelf.
When buyers compare under sink organizer options in general, the main differences usually come down to how the basket handles obstructions, how far it extends, and what mounting methods are supported. This Rev-A-Shelf pullout shelf clearly identifies those decision points. It uses a U-shaped basket to work around plumbing, includes full-extension soft-close slides for access, and supports both bottom and side mounting.
That combination matters because many under-sink products are easy to misjudge if the listing does not state how they install or whether they can clear pipes. Here, the product type and intended application are clearly stated: a pull-out undersink U-shaped wire basket for sink base cabinets. The listed dimensions also give buyers a starting point for fit checks before purchase.
Another practical point is consistency of use. A wire basket with open construction lets the user see stored items quickly, while the pullout format reduces the need to reach deep into the cabinet. For trade buyers ordering for a job, those details can simplify planning because the product description already identifies the core mounting options and included brackets. For homeowners ordering one unit, the same details help reduce guesswork. If your project requires load data, special hardware confirmation, or installation drawings, those items should be checked in current manufacturer literature before final approval.
The RS5786-33CR under sink organizer is described for 33 in. sink base cabinets, but actual interior cabinet dimensions and plumbing clearance should be confirmed before ordering.
The Rev-A-Shelf pullout shelf is listed at 32-1/2 in. wide, 21-29/32 in. long, and 5-1/2 in. high.
The chrome pullout basket uses a U-shaped design that is made to work around common obstructions such as plumbing.
The Rev-A-Shelf wire basket is identified as a door mount product. Buyers should verify door clearance and mounting position in the cabinet.
The pullout undersink basket can be bottom mounted or side mounted based on the cabinet layout and installation conditions.
The Rev-A-Shelf 5786 Series basket is described with full-extension soft-close slides for smoother access and closure.
The RS5786-33CR includes bottom and side mount brackets, and the product description states that it uses full-extension soft-close slides.
This Rev-A-Shelf product is an under sink organizer for sink base cabinets, not a pantry pullout.
Load rating and compliance details are not provided here. Follow manufacturer installation guidance and local building requirements where applicable.
Pullout undersink basket buyers should focus on cabinet fit, plumbing clearance, and mounting method before purchase. This Rev-A-Shelf unit includes a U-shaped chrome wire basket, full-extension soft-close slides, and bottom and side mount brackets for installation flexibility. Confirm that your sink base cabinet matches the intended application, verify the listed 32-1/2 in. x 21-29/32 in. x 5-1/2 in. dimensions against the usable interior space, and check door mount clearance so the basket performs as expected once installed.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RS5786-30CR Mfr# 5786-30CR | Rev-A-Shelf 5786 Series Chrome Pullout Shelf, 29-1/2"W x 21-29/32"L x 5-1/2"H, Door Mount - 5786-30CR |