PVC edgebanding 3D700R brushed aluminum from Doellken Woodtape is a 3D edgebanding made of transparent acrylic, so the printed brushed aluminum look sits on the reverse side and stays protected during routine shop handling. The edgebanding is 1mm thick, giving cabinet and furniture edges a substantial feel that ties in well with modern surfacing materials. The 15/16 inch width covers typical board thicknesses while allowing a bit of tolerance for trimming on automatic edgebanders. The material is supplied in a 492 foot roll, which supports longer runs and repeat jobs without frequent changeover. This edge banding belongs to the Edgebanding & Surfacing category, so it aligns naturally with laminate and other surfacing work in the woodworking industry.
This 3D edgebanding is specified for automatic edgebander applications, so the PVC-based strip is intended to run through standard machine processes such as preheating, glue application, pressing, and trimming in a single workflow. The 1mm thickness works well with typical edgebander settings that are calibrated for PVC or acrylic edge materials, which supports efficient setup on production lines. With a 15/16 inch width, the band gives enough coverage on common panel thicknesses used in cabinets and furniture while still leaving room for edge trimming passes. The 492 foot roll length allows operators to load a roll and process a substantial number of parts before roll change, which supports smoother throughput on woodworking projects.
This 3D edgebanding made of transparent acrylic belongs in projects where a brushed aluminum look is needed on exposed panel edges. The reverse-side printing creates the 3D700R brushed aluminum appearance behind the clear acrylic layer, so the visible face matches the intended metal-like design. For woodworking industry jobs that pair laminates or surfacing materials with metallic tones, this edge banding supports a consistent color transition from face to edge. Being part of the Edgebanding & Surfacing category, it fits naturally into cabinet, fixture, and furniture runs that already rely on coordinated surfacing materials. The 1mm thick, 15/16 inch wide profile suits edges on standard panel stock, helping installers build a uniform edge line along doors, drawer fronts, and carcass components using automatic edgebanders.
The transparent acrylic construction with print on the reverse side means the decorative brushed aluminum image is not exposed directly to glues or light abrasion during normal handling, which supports repeatable color and pattern from part to part. Designed for automatic edgebander applications, the material is aligned with machine-based workflows that depend on stable thickness and consistent edging behavior to reduce rework on cabinets or furniture panels. The specified 1mm thickness helps operators rely on known cutter, trimmer, and scraper settings from previous PVC and acrylic runs, which can streamline changeovers between different colors of edge banding. With a 492 foot roll, a single color like 3D700R brushed aluminum can cover multiple projects or a large job phase, helping maintain visual continuity across long runs of panels. Glues or cleaners that contain solvents should not come in contact with this product, because avoiding solvent contact preserves the transparent acrylic layer that protects the printed brushed aluminum look and helps maintain the intended appearance across the finished installation.
This 3D edgebanding is made of transparent acrylic, so the decorative brushed aluminum print sits behind a clear layer that helps protect the visual surface in normal woodworking use.
The print is on the reverse side of the transparent acrylic, so the brushed aluminum design is viewed through the clear layer, helping the appearance stay protected from direct handling and minor contact.
The edgebanding is 1mm thick and 15/16 inch wide, providing a substantial edge treatment that works well with typical panel dimensions processed on automatic edgebanders.
This product is designed for automatic edgebander applications, supporting machine-based edging workflows common in cabinet, fixture, and furniture production.
The roll length is 492 feet, allowing extended runs of the same 3D700R brushed aluminum color before roll change, which supports steady throughput on larger projects.
Glues or cleaners that contain solvents should not contact this product because solvent exposure can affect the transparent acrylic layer that protects the printed brushed aluminum design.
This PVC edgebanding 3D700R brushed aluminum from Doellken Woodtape pairs a 1mm thick, 15/16 inch wide profile with transparent acrylic and reverse-side printing, giving woodworking industry projects a protected brushed aluminum edge. The 492 foot roll format and design for automatic edgebander applications support efficient runs of cabinets, fixtures, or furniture components where a coordinated brushed aluminum edge treatment matters. When a project calls for consistent edge appearance within the Edgebanding & Surfacing family, this Doellken Woodtape 3D edgebanding aligns directly with that requirement.