Edgebanding 6255 Brushed Aluminum is a 2mm thick Doellken Woodtape PVC edge banding in a brushed aluminum look, sized at 15/16 inch width to cover standard panel edges and give them a finished, uniform appearance on cabinet and furniture projects. The PVC material grounds the visual brushed aluminum effect in a practical edge banding format, so installers get the decorative metallic look in a work-ready product for woodworking environments. The 15/16 inch width spans typical panel thicknesses, which helps cover the full edge and minor overhang for trimming, supporting a consistent visual line along cabinet sides, doors, or shelves. The 2mm thickness builds a more substantial edge profile than thinner bands, giving the finished component a defined edge and helping the material handle everyday contact in normal use. The Doellken Woodtape brand ties this edging to a recognized manufacturer of PVC edge banding for laminate and surfacing work.
The 2mm thickness on this Doellken Woodtape edgebanding creates a defined PVC edge that responds well to trimming and flushing operations, which matters when dialing in tight reveals on cabinet doors and case edges. The 15/16 inch width gives a bit of overhang on most standard panel builds, so installers can apply, then trim both faces for a straight, square finish along the entire run. Being part of the Edgebanding & Surfacing category sets this product up for common edge banding application methods used in woodworking shops, so it suits typical cabinet, furniture, and fixture production using laminate and surfacing materials. The brushed aluminum visual character helps the edge present as a finished design element instead of a raw substrate, tying edge treatment into the overall project appearance.
This Edgebanding 6255 Brushed Aluminum from Doellken Woodtape is positioned for projects that need PVC edgebanding with a metallic brushed aluminum look, such as cabinetry, store fixtures, or furniture using laminate and surfacing materials. The 15/16 inch width lets it track along common panel sizes, so one size works across doors, drawer fronts, and carcass edges that share similar thicknesses. In shops that standardize on brushed aluminum-style finishes, this edging helps align visible edges with flat surfaces, reducing visual breaks between faces and edges. The 2mm thickness suits applications where a more substantial edge is preferred, such as frequently handled fronts or exposed casework edges, giving them a defined band rather than a thin, minimal trim line.
The 2mm thickness provides enough PVC material for controlled trimming passes, which helps maintain a straight, chip-free edge when finishing cabinet and furniture components. That same thickness adds a visual depth to the brushed aluminum effect, making the edge read clearly against surrounding materials without looking fragile. The 15/16 inch width offers working tolerance on both faces of standard panels, so installers can align the band slightly proud and trim back for a precise, consistent reveal along long runs. The manufacturer part number 6255P-1502-1 ties this specific brushed aluminum 2mm by 15/16 inch product to ordering and reordering, helping shops repeat successful setups and match existing work. As a PVC edge banding within the Edgebanding, PVC class, it fits into established edgebanding workflows on laminate and surfacing projects, supporting predictable performance across multiple batches and job sites.
This Doellken Woodtape Edgebanding 6255 Brushed Aluminum is 2mm thick and 15/16 inch wide, giving a substantial PVC edge that covers common panel edges with room for trimming.
The Edgebanding 6255 Brushed Aluminum is a PVC edge banding, so it delivers the brushed aluminum look in a PVC format suited to woodworking and surfacing projects.
The 2mm thickness gives a more pronounced PVC edge, supporting controlled trimming and a defined profile on cabinet doors, drawer fronts, and case edges.
The 15/16 inch width spans typical panel thicknesses, providing coverage and slight overhang so edges can be trimmed flush for straight, clean lines.
The 6255P-1502-1 manufacturer part number identifies this specific brushed aluminum 2mm by 15/16 inch PVC edgebanding for ordering and matching repeat work.
The brushed aluminum appearance lets this PVC edgebanding visually align panel edges with brushed aluminum-style faces, supporting cohesive cabinet and fixture designs.
Choose Edgebanding 6255 Brushed Aluminum when a 2mm thick, 15/16 inch wide Doellken Woodtape PVC edge banding aligns with your cabinet or furniture layout, so finished edges match brushed aluminum-style surfaces across doors, panels, and casework runs.