
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice Series CU soft close hinge is a concealed cabinet hinge designed for 1/2 inch overlay face-frame doors, giving a clean look while controlling door motion. This hinge belongs to the Silentia Excentra line, so it uses an integrated decelerating mechanism in the hinge arm to slow the door. The hinge offers a 106 degree opening angle, allowing doors to swing wide enough for comfortable cabinet access in most standard layouts. An 11 mm (7/16 inch) cup depth is used across the line, so boring depth on the door stays consistent from one hinge position to the next. The hinge is made from nickel plated steel, providing a durable metal body with a neutral finish that fits typical cabinet hardware combinations. With its soft-close action and face-frame design, it suits both shop production runs and serious retrofit projects where a controlled close is required.
This hinge uses a screw-on mounting method, so the hinge fastens directly to the face frame and door with screws for a secure mechanical connection. The screw-on style suits typical shop drilling patterns where hinges are set and then fastened without special press-in hardware. An 11 mm (7/16 inch) cup depth is specified for all hinges in this Silentia Excentra line, keeping drill setup straightforward when boring multiple doors. The allowed drilling distance of 2.5 mm to 6.0 mm (3/32 inch to 1/4 inch) from the door edge gives room to position the cup to match overlay requirements. With a design for 1/2 inch overlay face-frame applications, the hinge works in standard North American face-frame cabinet construction when that overlay is required.
This hinge is specified as a 1/2 inch overlay face-frame hinge, so it is suited to cabinets where the door overlays the face frame by that amount. In kitchen, bath, or built-in cabinetry using face frames, this overlay is common, and the hinge geometry supports that layout. Being part of the Salice Series CU Silentia Excentra group, the hinge fits applications where soft-close action is desired but may need to be adjusted for heavier or lighter doors. The 106 degree opening angle allows doors on base or wall cabinets to open widely without requiring an extreme swing, which helps when cabinets are set near walls or adjacent cabinets. Because the hinge is a concealed cabinet hinge, it keeps hardware hidden when the door is closed, which supports clean looking installations in residential or commercial millwork.
The integrated soft close mechanism can be deactivated using the activation switch on the front of the unit, which lets installers respond if a particular door closes too slowly or needs a lighter closing feel. By using a 2 cam adjustment system, the hinge offers more adjustment options at the hinge, giving room to fine-tune door position after fastening. This can help dial in margins between doors and along the face frame without redrilling. The specified drilling distance range on the door of 2.5 mm to 6.0 mm (3/32 inch to 1/4 inch) adds another layer of control, allowing boring position to support the planned overlay while maintaining hinge performance. Nickel plated steel construction gives the hinge a familiar metal feel when adjusting cams and working with the activation switch, which supports repeatable adjustments during installation runs. With these combined details, the CUP37D9 hinge supports consistent alignment and soft-close behavior across multiple cabinet openings.
The hinge is designed for 1/2 inch overlay face-frame cabinets, so it suits projects where the door overlays the face frame by that amount in typical North American cabinet construction.
The hinge provides a 106 degree opening angle, which gives wide access to the cabinet interior while keeping door swing controlled for common kitchen and bath layouts.
The hinge line uses an 11 mm, or 7/16 inch, cup depth, so boring setups can be standardized across doors using this Salice Series CU Silentia Excentra hinge.
The hinge features a 2 cam adjustment design, providing additional adjustment points that help refine door alignment and reveal after mounting to the face frame.
The hinge has an integrated soft close mechanism that can be deactivated using an activation switch on the front, allowing the closing behavior to be changed on specific doors.
The hinge supports a drilling distance on the door from 2.5 mm to 6.0 mm, or 3/32 inch to 1/4 inch, which provides flexibility for positioning the cup relative to the door edge.
The CUP37D9 Salice Series CU Silentia hinge combines 1/2 inch overlay face-frame geometry, 106 degree opening, and a deactivatable soft close mechanism, giving flexibility for different doors on the same job. With 2 cam adjustment and a drilling distance range of 2.5 mm to 6.0 mm, it supports fine-tuned alignment without changing boring equipment. Nickel plated steel construction and concealed mounting make it suited to both production shops and serious DIY work where consistent soft-close performance is important.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 5000 Each | UBSUXX83CG Mfr# SUXX83CG | Series CU Cover Cap in Grey 1/2" to 3/4" Overlays | ||||
Sold in: 5000 Each | UBSUXX83C6 Mfr# SUXX83C6 | Series CU Cover Cap in Titanium 1/2" to 3/4" Overlays | ||||
Sold in: 1000 Each | WW54375 Mfr# 3670000420961 1000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 3670000420961 1000 - 1000/Box |