Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Series CU Soft-Close Hinge is a concealed cabinet hinge for face-frame construction that delivers soft-closing action for 1-1/4 inch overlay doors, so face-frame cabinets get clean lines with controlled door movement. This hinge is part of the Silentia line, so it uses an integrated decelerating mechanism on the hinge arm to slow the door, which helps reduce door bounce against the frame. The concealed design places the hinge inside the cabinet, keeping hardware out of sight while the overlay covers the face frame. As a 1-1/4 inch overlay hinge in nickel plated steel, it supports a common overlay layout while providing a neutral finish that works across many door styles. Being a Salice America product in the concealed cabinet hinges class, it fits professional cabinetmaking workflows that rely on consistent cup geometry.
This hinge is designed for 1-1/4 inch overlay on face-frame cabinets, so the door overlays the frame by that amount, defining how the door line-up will look on a run of cabinets. The screw-on style mounting attaches the hinge to the door and face-frame system using screws, which supports straightforward installation in woodworking shops set up for screw-fixed concealed hinges. With a cup depth of 11 mm (7/16 inch) shared across the line, cup boring can follow one depth setting in the drilling process, helping keep hinge locations consistent across doors built to the same overlay standard.
This hinge is for 1-1/4 inch overlay face-frame cabinets, so it aligns well with installations where doors are designed to extend notably over the frame for a more covered look. As part of the Salice Series CU Silentia Excentra range, it keeps the hinge concealed inside the case while the door overlay defines the visible reveal, which supports clean cabinet fronts in kitchens, baths, and shop-built casework. The 106 degree opening angle allows the door to open past 90 degrees, which aids access to cabinet interiors during daily use and during installation adjustments. Because all hinges in this line share an 11 mm cup depth, production shops can standardize drilling depth, which helps maintain alignment between doors across tall pantry units, base cabinets, and wall cabinets that share the same overlay target. The possible drilling distance range on the door from 2.5 mm to 6.0 mm supports setting cup setback within those limits, so overlay and reveal can be fine-tuned within the specified geometry.
This hinge is identified as a 2 cam adjustment hinge in the Silentia Excentra family, so the hinge body provides two cam points for adjustment tasks, helping fine-tune door position relative to the face frame within the hinge design. The integrated soft close mechanism is part of the hinge itself, so closing speed is controlled directly at the hinge, supporting smooth deceleration as the door nears the frame. When a different soft-closing strength is desired, the activation switch on the front of the unit allows the soft close mechanism to be easily deactivated, which is useful on smaller or lighter doors where full damping may be more than needed. Being a concealed cabinet hinge in nickel plated steel, it fits into cabinet interiors while offering a stable metal structure that works well with standard machining for 11 mm cup bores. The face-frame overlay specification, 2 cam adjustment, and deactivating soft close mechanism together help installers align doors visually, set opening behavior, and adapt closing force within the performance range built into this hinge.
The CUP3AD9 hinge is for 1-1/4 inch overlay face-frame cabinets, so it suits layouts where doors are designed to cover the face frame by that overlay dimension.
This Salice Series CU hinge has a 106 degree opening, allowing doors to swing open past 90 degrees for better cabinet access and adjustment space.
The Silentia hinge line uses an 11 mm, or 7/16 inch, cup depth, so cup bores should follow that depth to match the hinge cup geometry across doors.
This hinge has an integrated soft close mechanism with an activation switch on the front, so the decelerating action can be easily deactivated when a different closing strength is desired.
This hinge allows a drilling distance on the door from 2.5 mm to 6.0 mm, or 3/32 inch to 1/4 inch, giving a workable range for cup setback within the specification.
This concealed cabinet hinge is nickel plated steel, providing a metal construction with a neutral finish suited to interior cabinet environments.
The Salice CUP3AD9 hinge from Wurth Baer Supply pairs 1-1/4 inch overlay face-frame geometry with a 106 degree opening and integrated soft close, giving a single hinge solution for controlled door motion. With 2 cam adjustment, 11 mm cup depth, and a drilling distance range from 2.5 mm to 6.0 mm, it supports consistent machining and alignment across projects built to the same overlay standard. For shops and installers working with concealed cabinet hinges in nickel plated steel, this Silentia Excentra model offers a defined specification for planning overlay, access, and closing behavior on face-frame cabinets.
Sold In: 1 Each