Salice Series CU Silentia hinge gives you a 1-1/4 inch overlay face-frame concealed hinge with integrated soft close, so you can hang overlay cabinet doors while keeping the hardware hidden and control door closing behavior at the hinge itself. This Salice America concealed cabinet hinge belongs to the Series CU line, tying into a consistent family of parts when you are standardizing hardware across a project. The hinge is nickel plated steel, which provides a hard-wearing metal surface and a neutral finish that sits cleanly behind most door and frame materials in typical shop and jobsite conditions. This model is a face-frame hinge, so it is suited to framed cabinet construction where you need dependable overlay positioning and a clean frontal appearance.
This 1-1/4 inch overlay face-frame hinge is part of a concealed cabinet hinge class, so it is designed to mount inside framed cabinets while presenting a 1-1/4 inch overlay at the face, which is useful when you need generous door coverage over the frame. The 2 cam adjustment built into the Salice Series CU Silentia hinge supports precise door alignment after mounting, so you can correct small drilling or layout variances without reworking the case. The 11 mm cup depth used across the line keeps your boring setup common, which helps streamline repetitive drilling whether you are working on a single kitchen or a larger run.
This 1-1/4 inch overlay face-frame hinge is suited to framed cabinetry where you want a concealed hinge providing generous overlay, which helps hide frame faces and gives doors a more continuous look over the front of the cabinet. The hinge uses an 11 mm cup depth shared across the Series CU line, so it fits doors bored with that depth, allowing you to keep a single boring pattern when mixing this model with related hinges. The possible drilling distance on the door from 2.5 mm to 6.0 mm allows you to set the hinge cup closer to or further from the edge, which lets you adjust overlay and gaps to suit different door designs or edge details within that range. The approximate 106 degree opening angle lets doors open broadly without swinging excessively past the cabinet side, which is helpful in tight installations where adjacent cabinets, walls, or appliances sit close by.
This 2 cam adjustment cabinet hinge from Salice America gives you additional fine-tuning on the hinge arm, so small layout changes can be absorbed at the hardware instead of in the woodwork, saving time during install and later service visits. The integrated soft close decelerating mechanism is built into the hinge and can be easily deactivated using the clearly visible activation switch on the front of the unit, which means you can keep the same hinge and simply change its closing action when door size, weight, or customer preference calls for a different feel. Because the soft close mechanism sits in the hinge body, door closing is controlled right at the pivot, helping reduce door impact on the frame in everyday use. Using a nickel plated steel hinge body gives you a stable, metal-on-metal moving part with a corrosion-resistant outer layer, so the hinge is well suited to normal cabinet environments where long-term function is important to your shop reputation.
The Salice Series CU Silentia hinge serves face-frame cabinets with a 1-1/4 inch overlay, so it works in framed construction where the door needs to cover the frame significantly.
The 2 cam adjustment on this cabinet hinge provides additional on-hinge alignment, letting you refine door position to achieve even reveals without reboring or shifting the cabinet.
The 11 mm cup depth defines how deep to bore the hinge cup hole, so you can set your boring machine or jig once and keep cup depth consistent across doors in the same run.
This soft-close mechanism can be deactivated at the hinge using the activation switch on the front, so you can change closing behavior without swapping hinge models.
This concealed cabinet hinge provides approximately 106 degree opening, giving doors a wide swing for access while still respecting common cabinet clearances.
The 2.5 mm to 6.0 mm drilling distance range lets you position the cup closer to or further from the door edge, allowing overlay and gap adjustments within that drilled range.
The Salice Series CU Silentia hinge with 1-1/4 inch overlay, 2 cam adjustment, and an integrated deactivatable soft close mechanism gives you a controlled, concealed hinge solution for framed cabinets. With 11 mm cup depth, 2.5 mm to 6.0 mm possible drilling distance, and approximately 106 degree opening, it fits typical cabinet workflows while allowing tuning of overlay and door motion. Choose this nickel plated concealed cabinet hinge when you want consistent boring, adjustable alignment, and on-hinge control of soft closing across a project.
Sold In: 1 Each