Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX Timberline double door latch is designed to secure the secondary door on double door cabinets or wardrobe units without a center divider, so both doors stay controlled by a single lock cylinder for straightforward operation. This DL-300 latch works with cam, deadbolt, or electronic locks, giving flexibility when matching existing locking systems across a project. The latch provides up to 150 lbs of pull force, so the non-locked door stays engaged under normal cabinet use. A black finish keeps the latch visually low-profile inside darker interiors, which helps the hardware disappear in finished installations. The door can be closed in any sequence, so installers and users do not have to follow a specific order when operating the doors. As a bottom mount kit, it installs at the lower section of the cabinet or wardrobe unit, keeping the locking points down at a structurally solid area.
This CompX Timberline Lock latch mounts in double door cabinets or wardrobe units as a bottom mount kit, so layout starts at the lower rail or floor of the unit. Mounting it at the bottom positions the latch where cabinet structure is usually strongest, giving a solid base for the rated pull force. The DL-300 is designed specifically to secure the secondary door of a double door opening that does not have a center divider, which keeps the active lock and strike focused on the primary door. With the latch tied to any compatible cam, deadbolt, or electronic lock on the primary door, the non-locked leaf stays captured whenever the lock is thrown. Using two kits on units 48 inches or taller creates a three point locking arrangement, which helps restrain taller doors at multiple points along their height.
The DL-300 double door latch mounts in double door cabinets or wardrobe units without a center divider, so it suits wide openings where a single lock still needs to control both leaves. In these installations, the latch is dedicated to securing the secondary or non-locked door while the lock hardware operates from the primary door. Because the kit is described as bottom mount, it is positioned at the lower section of the unit, tying into cabinet structure that can handle the specified pull force. For units that reach 48 inches or taller, using two DL-300 kits provides three point locking, anchoring the door system at more than one elevation for added restraint.
The CompX Timberline Double Door Latch eliminates the use of an elbow catch by directly capturing the secondary door, which simplifies alignment and reduces moving parts that affect door engagement. Its ability to allow two or three point locking means the same part number supports both standard height and taller cabinet or wardrobe designs, which keeps ordering and stocking straightforward across multiple projects. The DL-300 works with cam, deadbolt, or electronic locks, so the latch can be tied into mechanical or electronic access control using the same basic cabinet preparation. Up to 150 lbs of pull force means the latch can resist typical pulling at the secondary door edge, supporting consistent closure under day-to-day use. The fact that the door can be closed in any sequence reduces sensitivity to user technique, so both doors can be operated in whichever order is convenient without affecting security.
The DL-300 double door latch is designed for double door cabinets or wardrobe units without a center divider, so one locking system can control both doors.
The DL-300 latch secures the secondary or non-locked door by engaging it to a latch point, so the door stays held whenever the primary door lock is engaged.
The CompX Timberline double door latch works with cam, deadbolt, or electronic locks, so it can match different locking systems used on the primary door.
Three point locking with the DL-300 uses two kits on units 48 inches or taller, so the doors are restrained at multiple points along their height.
The DL-300 is described as a bottom mount kit, so it is installed at the lower section of the double door cabinet or wardrobe unit.
The double door latch provides up to 150 lbs of pull force, so the secondary door remains engaged under typical opening and closing loads.
The CompX Timberline double door latch DL-300 provides a way to secure the secondary leaf of double door cabinets or wardrobe units without a center divider using a single lock on the primary door. With up to 150 lbs of pull force, compatibility with cam, deadbolt, and electronic locks, and support for two or three point locking, it aligns with cabinet and wardrobe layouts that need dependable door capture. For projects calling for a black finish latch that mounts at the bottom of the unit, this DL-300 configuration supports consistent locking across multiple openings.
Sold In: 1 Each