CompX Timberline double door latch gives a cabinetmaker or installer a way to secure the secondary door on a double door cabinet or wardrobe unit without a center divider, so a single lock can control both doors on the opening. This DL-300-W double door latch works with any cam or deadbolt lock, so it ties into the lock style already specified for the job and keeps the keying plan consistent across the project. The latch provides up to 150 lbs. of pull force, which holds the non-locked door firmly against the cabinet and supports repeated daily use in a cabinet or wardrobe application. The white finish helps this latch blend visually with white casework interiors, which keeps the hardware from drawing attention when doors are opened. Because the door can be closed in any sequence, this latch avoids fussy closing order and simplifies day-to-day use for the end user.
The CompX Timberline DL-300-W is described as a bottom mount kit, so it installs at the bottom of a double door cabinet or wardrobe to capture the secondary door as it swings shut. Because it eliminates the use of an elbow catch, this latch changes the way the door is held by using a latch, activator, and catch arrangement instead of a rotating catch on the door edge. The latch works with cam, deadbolt, or electronic locks, so the installer can place the lock body in the primary door and position the latch components to align with the lock bolt throw. Using two DL-300-W kits on units 48 inches or taller provides three point locking, so taller cabinets gain an additional locking point for better door restraint at both top and bottom.
The CompX Timberline DL-300-W double door latch is designed for use in double door cabinets or wardrobe units without a center divider, so it addresses wide openings where two doors meet at the center. In these applications, the latch secures the secondary door, while a cam, deadbolt, or electronic lock secures the primary door, creating a controlled opening across both leaves. Installers can use this latch in cabinet or wardrobe layouts that call for two or three point locking, since the DL-300-W is described as supporting two or three point locking depending on the number of kits used and the cabinet height. When the application is 48 inches or taller, using two kits creates a three point locking arrangement by adding an additional engagement location, which helps hold tall doors more evenly along their height.
This CompX Timberline Lock latch kit eliminates use of an elbow catch, so the system relies instead on a dedicated latch, activator, and catch that engage positively as the secondary door closes. That change in hardware style affects day-to-day workflow by giving the secondary door a defined pull point, supported by up to 150 lbs. of pull force, which helps the doors stay closed under the load that typical cabinet contents can apply. Because the latch works with any cam or deadbolt lock, as well as electronic locks that use cam or deadbolt actions, one locking plan can be used throughout a project without changing latch style between mechanical and electronic locations. The fact that the door can be closed in any sequence reduces user error during operation and helps reduce service calls related to door closing complaints. The white finish further supports project consistency when casework interiors are specified in white, since the latch, activator, and catch align visually with the cabinet color scheme.
The CompX Timberline DL-300-W double door latch is designed to secure the secondary door of a double door cabinet or wardrobe unit without a center divider, so both doors are controlled by a single lock.
The CompX Timberline double door latch works with any cam or deadbolt lock by letting the lock secure the primary door while the latch, activator, and catch secure the secondary door on the same opening.
The DL-300-W double door latch allows two or three point locking, and using two kits on units 48 inches or taller creates a three point locking setup across the tall cabinet doors.
The CompX Timberline DL-300-W double door latch provides up to 150 lbs. of pull force, which helps keep the secondary door firmly engaged and supports repeated opening and closing cycles.
Eliminating an elbow catch means the DL-300-W uses a latch, activator, and catch arrangement instead, which changes the engagement point but still secures the secondary door on double door cabinets.
Two DL-300-W double door latch kits are used on units 48 inches or taller to provide three point locking, giving tall cabinet doors an additional locking point for more even restraint.
The CompX Timberline DL-300-W double door latch gives a straightforward way to secure the secondary door on double door cabinets or wardrobe units without a center divider using cam, deadbolt, or electronic locks already planned for the job. Its ability to provide up to 150 lbs. of pull force, support two or three point locking, and allow the doors to close in any sequence ties directly into how reliably the finished cabinet will operate. For projects calling for a white finish and coordinated locking across wide openings, this double door latch keeps the hardware choice consistent from layout through final installation.
Sold In: 1 Each