24" KV182 Heavy-Duty Shelf Bracket, Titanium Finish

24 Inch KV182 Shelf Bracket For Heavy Loads

24 inch KV182 shelf bracket gives installers a long, heavy-duty support arm for deeper shelving layouts where load capacity matters. This Knape and Vogt bracket belongs to the KV182 model line, so it matches the geometry and engagement style crews expect from that series. The bracket is typically used with the KV82 series standard, which ties the bracket into a known standard-and-bracket system for adjustable shelf runs in closets, garages, or utility storage. A titanium finish defines the appearance of this 182 TI 24 model, which helps coordinate with projects specified for that look. As a shelf standards and brackets component in the shelf, closet, and garage organization category, it fits into projects where adjustable support and repeatable alignment are part of the overall layout plan.

Heavy-Duty Shelf Bracket Details That Matter

• Weight rating of 200-425 lb per pair, based on length, lets designers and installers match bracket length to expected loading, which supports planning for deeper shelving runs or higher load zones without overbuilding every position.
• Bracket has two engagement teeth to fasten brackets to standards, creating a positive mechanical connection between bracket and KV82 series standard that helps resist vertical slip when shelves are carrying substantial, evenly distributed weight.
• Two holes in bottom of bracket allow bracket to be fastened to shelf, so the shelf can be tied directly to the steel arm, which helps limit shifting under load and keeps longer 24 inch shelves aligned over time.
• Material changes from 16-gauge steel on 5-12.5 inch lengths to 14-gauge steel on 14.5-24 inch lengths, so this 24 inch bracket uses the heavier 14-gauge section, which supports higher rated loads per pair at this extended projection.
• Available lengths from 5 inches to 24 inches in the KV182 line mean 24 inch positions can be mixed with shorter brackets in the same project, helping installers use the same model family while tailoring support depth across a run.
• Available finishes of almond, black, white, and special-order titanium give specifiers finish flexibility across the KV182 range, while this titanium version coordinates with jobs that call out that specific finish appearance.

Bracket And Standard Fit For KV Installations

Knape and Vogt KV182 brackets are typically used with the KV82 series standard, so this 24 inch titanium model fits into that established standard system for adjustable shelving layouts. The two engagement teeth on the bracket are designed to fasten into the standard, which sets up a repeatable way to hang multiple brackets in a straight, aligned row. Two holes in the bottom of the bracket allow it to be fastened to the shelf, tying the shelf to the steel arm so the assembly acts as a single unit under load. With the 24 inch bracket built from 14-gauge steel and rated as part of a 200-425 lb per pair system, installers can plan supported spans and bracket spacing that respect both the length and the rated performance of the KV182 line.

Using This 24 Inch Bracket In Real Projects

Where The 24 Inch KV182 Bracket Fits Best

This 24 inch KV182 shelf bracket, in titanium finish, is suited to shelf, closet, and garage organization projects where deeper shelf boards are required. Being typically used with the KV82 series standard, it integrates into vertical standards to create adjustable positions at various heights. As part of the KV182 model range with available lengths from 5 inches to 24 inches, it can be deployed at locations needing maximum projection while shorter KV182 brackets handle shallower shelves in the same installation. The 14-gauge steel construction used on the 14.5-24 inch lengths provides a heavier section at this size, which supports the system weight rating of 200-425 lb per pair, depending on bracket length within the series.

The bracket has two engagement teeth that fasten to the standard, which helps maintain vertical and lateral stability when shelves are loaded, building confidence in repeated use of the KV182 with KV82 standard combination. Two holes in the bottom of the bracket allow fastening to the shelf, which ties the shelf surface directly to the steel support and limits racking or shifting on the arm. With available finishes of almond, black, white, and special-order titanium across the KV182 family, this titanium finish shelf bracket lets specifiers coordinate hardware appearance with surrounding fixtures while still working inside the same shelf standards and brackets system. For projects sourced through Wurth Baer Supply, the Knape and Vogt brand connection supports integration with other woodworking industry components available through the same distributor.

Common Questions About The 182 TI 24 Bracket

Selecting This 24 Inch Titanium KV182 Bracket

The 24 inch KV182 shelf bracket in titanium finish, identified as 182 TI 24, gives projects a long, heavy-duty support built from 14-gauge steel within the KV182 line. With a 200-425 lb per pair rating for the series and a design typically used with the KV82 standard, this Knape and Vogt component fits shelf, closet, and garage organization layouts that call for deeper shelves. For sourcing through Wurth Baer Supply, this bracket ties into a broader woodworking-focused offering, so it can be chosen as part of a coordinated standards-and-brackets solution.