9" KV182 Heavy-Duty Shelf Bracket, Titanium Finish

9 Inch KV182 Heavy Duty Shelf Bracket Use

9 inch KV182 heavy duty shelf bracket identifies this Knape and Vogt bracket as a 9 inch length in the KV182 model line, so installers can match it to layouts that call for that specific size. The titanium finish identifies this version as a special order finish, which matters when projects need that particular color across a full run of shelves. The bracket is part of the Knape and Vogt shelf, closet, and garage organization class, so it fits into typical storage layouts in those environments. Being in the shelf standards and brackets product class places it within standard bracket-and-standard systems that trades already know. The manufacturer part number 182 TI 9 gives an exact identifier for drawings, takeoffs, and reorders, reducing confusion when coordinating multiple bracket sizes and finishes on one job.

Key KV182 Shelf Bracket Details For Projects

• The bracket is typically used with the KV82 series standard, so installers working with that standard can select this bracket model to stay within the same Knape and Vogt system during layout and installation.
• Available lengths across the KV182 line are 5, 7, 10-1/2, 12-1/2, 14-1/2, 18-1/2, and 24 inches, so layouts using multiple shelf depths can be designed around one bracket family for more consistent hardware planning.
• Available finishes for the KV182 line are Almond, Black, and White, and titanium is a special order finish, so color choices can be matched to closet or garage designs while reserving titanium for projects that specify that look.
• Lengths from 5 to 12.5 inches use 16-gauge steel, so shorter brackets have a material thickness suited to their span and load rating in typical shelving applications.
• Lengths from 14-1/2 to 24 inches use 14-gauge steel, so the longer spans gain heavier material to support their rated loads in deeper shelves or heavier storage runs.
• The bracket has a weight rating of 200 to 425 pounds per pair based on length, so designers can select bracket lengths that align with anticipated shelf loads in closets, garages, or storage areas.
• The bracket is made in the USA, which matters for projects that call out domestic manufacturing in specifications or sourcing requirements on commercial or institutional work.

Bracket And Shelf Mounting Design Details

The bracket has two engagement teeth to fasten it to standards, so once seated in the standard slots it resists dislodging under normal downward loading. This engagement design supports repeatable alignment along the standard, which helps keep multiple shelves in plane on larger runs. Two holes in the bottom of the bracket allow the bracket to be fastened to the shelf, so the shelf can be mechanically tied to the bracket to resist shifting during use. That bracket-to-shelf connection supports more stable installations in closets and garages where loads may be moved frequently along the shelf surface.

Where This 182 TI 9 Bracket Fits In Systems

Using The KV182 Bracket With KV82 Standards

The KV model KV182 is typically used with the KV82 series standard, so this 9 inch titanium bracket slots into standard-based layouts already designed around KV82 uprights. That pairing lets installers extend or modify existing KV82 runs without changing hardware families. Because the KV182 family covers lengths from 5 to 24 inches, a design using KV82 standards can mix shallow and deep shelves while keeping the same bracket profile. In closet or garage organization work, that consistency helps create clean vertical lines along the standards and simplifies explaining hardware choices to the end client. Matching the 182 TI 9 part to drawings by its exact number also helps avoid mixing bracket sizes when ordering for multi-room or multi-bay projects built on KV82 standards.

Load Rating, Steel Gauge, And Shelf Security Impact

The weight rating of 200 to 425 pounds per pair, based on length, gives a clear load window for planning how much material or equipment each shelf can support in a shelf, closet, or garage organization layout. The use of 16-gauge steel on 5 to 12.5 inch lengths means those shorter brackets carry their rated loads with a material thickness suited to common closet and utility shelving spans. For deeper shelves at 14-1/2 to 24 inches, the shift to 14-gauge steel adds heavier material to support the higher potential bending moment along the bracket length. The two engagement teeth that fasten the bracket to standards contribute to holding power against vertical movement when shelves are loaded or unloaded. The two holes in the bottom of the bracket that allow fastening to the shelf give the option to tie the shelf firmly to the bracket, which helps maintain alignment when loads are shifted and reduces movement in everyday use.

Common Questions About 9 Inch KV182 Titanium Bracket

Selecting This 9 Inch Titanium KV182 Bracket

This 9 inch KV182 heavy duty shelf bracket in titanium finish gives a defined length, finish, and model within the Knape and Vogt KV182 system. The typical use with KV82 standards, defined weight rating per pair, and steel gauge by length provide clear parameters for designing shelf, closet, and garage organization runs where brackets must align with specified loads, uprights, and visual requirements.