39" KV82 Heavy-Duty Double Slot Shelf Standard, Titanium Finish

KV82 Heavy-Duty Shelf Standard For Adjustable Storage

KV82 heavy-duty shelf standard describes this 39 inch Knape and Vogt upright that supports adjustable shelving runs in closet, garage, or general storage layouts. The Model KV82 designation identifies it as part of the Designer Series standards and brackets line, so it works within a coordinated system when matching to other Designer Series components on a project. The double slot configuration gives each bracket two engagement points per station, which helps keep brackets seated consistently along the run when loads change over time. The 14-gauge steel material provides a robust backbone for typical residential and light commercial shelving applications, so installers can span wall studs with confidence when laying out straight, level standards. The 39 inch length gives mid-height run options between short closet sections and full-height wall standards, which can simplify planning when working around windows or obstructions. The titanium finish on this standard offers a specific color choice that aligns with design-driven jobs.

Designer Series Shelf Standard Details That Matter

• The Knape and Vogt Model KV82 identification ties this upright to the broader KV82 and KV182 Designer Series system, so bracket fit and appearance follow an established product family across multiple installations.
• The 39 inch length lets installers choose a mid-range standard height that can align with common closet or garage layouts, helping coordinate shelf elevations without committing to floor-to-ceiling uprights.
• The double slot design on this heavy-duty standard offers two bracket engagement points at each adjustment location, which helps brackets seat squarely and repeat positions along the wall run.
• The titanium finish option allows this upright to blend with projects calling for a titanium-colored standard, which can coordinate with other titanium Designer Series components on visible storage installations.
• The heavy-duty construction classification pairs with the Designer Series concept to support demanding shelving layouts, so this standard suits projects where both appearance and strength are priorities.

KV82 Shelf Standard Mounting And Adjustment

This Knape and Vogt KV82 shelf standard has screw holes spaced 10 inches apart on center, which gives installers predictable fastening points when locating studs or blocking behind drywall. The 1-1/16 inch wide by 11/16 inch deep profile defines how far the upright projects from the wall surface and how much wall face it covers, so spacing between adjacent standards can be laid out cleanly for various shelf depths. Adjustable in 1-1/4 inch increments, the slot pattern lets shelving heights change in regular steps, which is useful for aligning multiple shelves through a room or matching existing layouts. Recommended fasteners are identified as KV82SCRW, so there is a specific fastener reference when planning secure mounting for this particular standard.

Using The 39 Inch Titanium Shelf Standard On Jobs

Where This 39 Inch KV82 Standard Fits Best

The 39 inch KV82 heavy-duty double slot shelf standard fits projects that benefit from a mid-height upright, such as reach-level closet sections or segmented garage walls where full-height runs are not required. Its 1-1/16 inch width and 11/16 inch depth define a compact profile, which works well beside door casings or trims without dominating the wall surface. Screw holes spaced 10 inches on center allow the standard to bridge typical stud layouts in many framed walls, so installers can hit framing at consistent intervals along the length. Because this standard is part of the Designer Series, it suits applications where the upright will remain visible and finish consistency matters from one project to another. The titanium finish option supports designs looking for a specific metallic tone rather than basic white, black, or almond, so open storage remains coordinated with adjacent fixtures.

Why KV82 Details Support Repeatable Installations

The KV82 model designation, typically used with KV182 series bracket, anchors this upright in a defined standard-and-bracket pairing, which helps produce predictable bracket seating and load transfer from one installation to the next. The double slot configuration gives each KV182 bracket two points of contact at every adjustment location, which can reduce bracket rocking as loads are added, removed, or repositioned during daily use. Adjustment in 1-1/4 inch increments standardizes shelf height changes, so multiple bays of shelving can align across a room without guesswork on spacing. The 14-gauge steel construction gives this shelf standard the stiffness expected from heavy-duty classification, helping it maintain alignment when shelves are loaded over time. Titanium finish within the Designer Series provides a consistent surface color along the entire length, which helps finished installations look uniform even when standards of different lengths are used in the same space.

Common Questions About The KV82 Titanium Standard

Choose The 39 Inch KV82 Standard For Coordinated Runs

The Knape and Vogt 39 inch KV82 heavy-duty double slot shelf standard in titanium finish combines Designer Series styling with a defined adjustment pattern and 14-gauge steel construction, so it suits visible storage runs needing repeatable bracket engagement. With 1-1/16 inch width, 11/16 inch depth, and screw holes on 10 inch centers, it offers predictable mounting geometry from project to project. For installers planning systems around KV182 series brackets and seeking a titanium Designer Series look, this 82 TI 39 standard is a direct fit for adjustable shelving layouts.