63" KV82 Heavy-Duty Double Slot Shelf Standard, Titanium Finish

63 Inch KV82 Shelf Standard For Adjustable Storage

63 inch KV82 shelf standard from Knape and Vogt is a heavy-duty double slot upright that supports adjustable shelving runs in closets, garages, and storage walls where load capacity and layout flexibility matter. The 63 inch length provides a tall run for multiple shelves on a single vertical, which helps installers build full-height storage without splicing shorter standards. The titanium finish is noted as available via special order, giving a designer-style look for visible installations that still need heavy-duty performance. As part of the Designer Series standards and brackets line, this upright uses an attractive third epoxy coat finish, which contributes to a consistent appearance along the full run in open cabinetry or closet systems. Being made by Knape and Vogt positions it within a widely used commercial-standard system favored in closet and garage organization work.

Key KV82 Standard Details For Real-World Jobs

• KV Model KV82 is typically used with KV182 series bracket, so the double slot profile and bracket interface are tuned for that pair, which helps installers set up matched uprights and brackets from the same system.
• The standard is described as heavy-duty with a double slot design, which supports higher-capacity shelving layouts, important when planning deeper or longer shelves in closet and garage organization projects.
• Dimensions of 1-1/16 inch wide by 11/16 inch deep define the footprint on the wall, which helps plan stud engagement, spacing between parallel standards, and clearance behind shelf hardware.
• Material is 14-gauge steel, giving the upright a robust section that supports demanding storage applications where lighter-gauge standards might limit usable load or long-term stability.
• The adjustable slots are spaced in 1-1/4 inch increments, allowing installers to fine-tune shelf heights while still working within a predictable repeat pattern along the entire 63 inch length.
• Screw holes spaced 10 inches apart on center give a clear fastening pattern, which simplifies laying out fasteners into studs or backing for consistent support down the run of the standard.

Mounting And Fastener Pattern For KV82 Standards

The KV Model KV82 standard uses screw holes that are spaced 10 inches apart on center, giving a regular vertical pattern for anchoring into framing or solid backing over the 63 inch length. This spacing lets installers align holes to studs or blocking while keeping a repeatable fastening rhythm across multiple uprights on a wall. The manufacturer notes recommended fasteners as KV82SCRW, sold separately, indicating a matched screw option that is sized with the standard holes and material thickness in mind. With dimensions of 1-1/16 inch wide by 11/16 inch deep, the standard presents a slim face to the room while still providing enough body depth for secure screw engagement during installation.

Using The 63 Inch KV82 Standard In Storage Runs

Where This KV82 Shelf Standard Fits Best

The 63 inch KV82 heavy-duty double slot shelf standard from Knape and Vogt sits in the shelf, closet and garage organization category, aligning it with wall-mounted storage systems rather than free-standing racks. Within the shelf standards and brackets product class, it works as the vertical track that receives KV182 series brackets, creating an adjustable support grid for shelves. Available in lengths that range from 16-1/2 inches up to 94 inches, the 63 inch option serves mid-height to tall wall sections, useful for typical residential closet walls or garage sidewalls where ceiling heights do not require the longest standards. The Designer Series standards and brackets designation connects this part to a coordinated family of uprights and brackets used in closet and storage installations where appearance and performance both matter.

Why KV82 Dimensions, Finish, And Gauge Matter

The titanium finish on this KV82 standard is listed as available via special order, offering another color option alongside almond, black, and white epoxy-coated finishes for projects that call for a specific tone at visible uprights. The attractive third epoxy coat finish described for Designer Series standards and brackets means the visible faces of the standard are coated beyond the base layers, which supports a uniform color presentation along the run in open installations. The 14-gauge steel construction gives the standard a solid feel in use, which is important when working with deep shelves, heavier stored items, or long bracket projections from the wall. Adjustable slots set in 1-1/4 inch increments allow shelf elevations to be tuned around hanging rods, bins, or cabinet tops while maintaining even spacing between brackets for a clean layout. Because the KV82 standard is typically used with KV182 series brackets, installers can plan bracket positions knowing they are using components engineered as a system, which supports predictable engagement in the double slots across the full height.

Common Questions About The 63 Inch KV82 Standard

Selecting This KV82 Standard For Your Project

The 63 inch KV82 heavy-duty double slot shelf standard from Knape and Vogt combines 14-gauge steel construction, 1-1/16 inch by 11/16 inch dimensions, and 1-1/4 inch adjustment increments to support practical, repeatable shelf layouts. With screw holes spaced 10 inches on center and a Designer Series epoxy coat finish, it fits closet and garage organization projects that rely on consistent vertical alignment and clean visible uprights. The titanium finish option and typical pairing with KV182 series brackets give you a coordinated path to build adjustable storage runs using a matched standard-and-bracket system.