Knape and Vogt SCB 11-3/8" Chrome Bottom Mount Waste Pullout with 2-27 Quart Platinum Bins Soft-Close, SCB12-2-27PT
Description
Knape And Vogt SCB Bottom Mount Waste Pullout
Knape and Vogt SCB bottom mount waste pullout is a FYSCB Series double trash pull-out with soft close that mounts at the cabinet bottom to organize two 27 quart platinum bins in a single pull-out frame. The heavy duty, full extension ball bearing slides with Soft-Close technology move the assembly fully out of the opening, so both bins are accessible without reaching inside the cabinet. The 1 inch over-travel lets the bins clear the face frame or door line, which helps when lifting bins straight up. The specialized wire management system holds bins securely in place in the frame, so they stay located during repeated use. A soft-close slide system pulls the unit gently into the cabinet, which helps reduce slamming when the pull-out is pushed closed. The design keeps both bins aligned in a dedicated track, giving a consistent motion path for daily kitchen or bath cabinet use.
Key FYSCB Series Details For Daily Use
- Heavy duty, full extension ball bearing slides with Soft-Close technology support the pull-out movement, so the bins travel smoothly to full extension for direct access in front of the cabinet.
- 1 inch over-travel beyond full extension moves the bins slightly past the cabinet front, which creates extra clearance for lifting out the 27 quart platinum bins without rubbing the face frame.
- The specialized wire management system that holds bins securely in place keeps the 27 quart bins located in the frame, which helps them stay seated during repeated open-and-close cycles.
- Easy installation with only four screws into heavy-duty mounting straps speeds setup of the bottom mount frame and gives a solid attachment point at the cabinet floor area.
- An easy to attach handle connects to the pull-out frame, so the user has a consistent grab point for operating the soft-close slides from the front of the cabinet.
- Weight capacity of 30 lb maximum per bin, not to exceed 80 lb total weight, defines a clear load range that supports typical residential trash or recycling use.
Bottom Mount Trash Pull-Out Installation Details
This bottom mount trash pull-out uses heavy-duty mounting straps fastened with four screws, so the frame anchors directly to the cabinet bottom panel. The full extension ball bearing slides are integrated into the frame, which removes separate slide alignment steps during installation. Soft-Close technology is built into the slides, so the closing action is controlled once the frame is mounted square. The design is part of the KV FYSCB Series double trash pull-outs, providing a consistent installation layout for SCB12-2-27PT units in kitchen and bath cabinet applications. Waste bins are available in white and platinum, and this configuration uses 27 quart platinum bins for visual match to a platinum interior scheme.
Using SCB12-2-27PT In Cabinet Workflows
Where This Double Trash Pull-Out Fits Best
This Knape and Vogt SCB 11-3/8 inch chrome bottom mount waste pullout is designed as a double trash pull-out for kitchen and bath cabinet spaces that benefit from two 27 quart platinum bins in one opening. The frame sits on the cabinet bottom using heavy-duty mounting straps, so it suits cabinets where a floor-mounted system is preferred over side mounting. As a FYSCB Series double trash pull-out with soft close, it aligns with installations that call for controlled closing in residential cabinet environments. The SCB12-2-27PT configuration uses 27 quart bins, which supports layouts where medium-capacity bins fit within a bottom mount trash pullouts footprint. Waste bins are available in white and platinum in this series, and this model uses platinum bins for a coordinated look with other platinum components in the cabinet area.
Details That Support Repeatable Pull-Out Performance
The heavy duty, full extension ball bearing slides with Soft-Close technology carry the SCB12-2-27PT frame and bins through their travel, which helps maintain alignment under repeated daily use. The 1 inch over-travel gives the user additional clearance beyond the cabinet front, supporting straight vertical removal of the 27 quart platinum bins when emptying. The specialized wire management system that holds bins securely in place keeps the bins seated during impact when the soft-close engages, limiting shift in the bin position. Easy installation with only four screws into heavy-duty mounting straps reduces layout variables, which supports repeatable results across multiple cabinet openings using the same mounting geometry. The easy to attach handle centralizes how the user pulls the assembly, helping the slides track evenly on both sides. A weight capacity of 30 lb maximum per bin, not to exceed 80 lb total, defines the working load for the slides and frame so the system remains within the stated capability of this FYSCB Series double trash pull-out.
Common Questions About SCB12-2-27PT Pull-Out Use
What type of mounting does this SCB12-2-27PT unit use?
The SCB12-2-27PT waste pull-out uses a bottom mount design with heavy-duty mounting straps, which anchors the frame to the cabinet floor for stable slide operation.
How do the soft-close full extension slides help in use?
The heavy duty, full extension ball bearing slides with Soft-Close technology extend the pull-out fully and then draw it closed smoothly, which supports easier access and controlled closing.
What bin capacity does this double trash pull-out support?
The SCB12-2-27PT configuration uses two 27 quart platinum bins, giving a defined bin volume for planning trash and recycling layouts inside the cabinet.
How much weight can each 27 quart bin carry?
The FYSCB Series double trash pull-out is rated for 30 lb maximum per bin, not to exceed 80 lb total, which sets the working load range for everyday refuse.
What is the role of the specialized wire management system?
The specialized wire management system holds bins securely in place within the frame, which helps keep them seated and aligned as the pull-out moves on its slides.
How is the handle used on this waste pull-out?
The easy to attach handle connects to the pull-out frame, providing a single grab point so users can operate the soft-close slides consistently from the cabinet front.
Selecting This FYSCB Series Pull-Out For Cabinets
The Knape and Vogt SCB12-2-27PT bottom mount trash pull-out pairs a FYSCB Series double trash pull-out frame with two 27 quart platinum bins and soft-close slides for cabinet integration. The heavy duty, full extension ball bearing slides with Soft-Close technology, 1 inch over-travel, and specialized wire management system give the assembly defined motion and bin control. With bottom mounting through heavy-duty straps using four screws, this unit sets a clear installation method for cabinet projects that need a double trash pull-out solution with 30 lb maximum per bin, not to exceed 80 lb total.
