Knape and Vogt SCB 11-3/8" Chrome Bottom Mount Waste Pullout with 2-27 Quart White Bins Soft-Close, SCB12-2-27WH

Knape And Vogt SCB Bottom Mount Trash Pullout

Knape and Vogt SCB bottom mount trash pullout describes a FYSCB Series double trash pull-out that mounts to the cabinet bottom and organizes two 27 quart white bins under a kitchen or bath cabinet, so waste stays contained and easy to reach on a smooth sliding frame. The product uses heavy duty, full extension ball bearing slides, allowing the frame to travel fully out of the cabinet opening, which provides clear access to both bins during use or bag changes without working around the cabinet face. Those slides incorporate Soft-Close technology, so the pull-out closes gently at the end of travel, helping reduce noise and limiting slam shock on the cabinet when users push the frame closed in normal operation. A specialized wire management system holds bins securely in place within the frame, stabilizing each bin during opening and closing so the load tracks consistently on the slides.

Practical Details That Support Daily Cabinet Use

• The FYSCB Series design as a double trash pull-out with Soft-Close technology concentrates refuse and recycling in a dedicated slide-out frame, which helps keep cabinet interiors cleaner while still allowing frequent access on a controlled, quiet motion path.
• Heavy duty, full extension ball bearing slides with 1 inch over-travel let the frame move entirely past the cabinet front, which gives more working room at the bin tops for lifting liners straight up without interference from the face frame or door edges.
• The specialized wire management system that holds bins securely in place locks the white bins into the organizer frame, which helps prevent tipping or shifting when users load heavier waste so the weight remains centered over the slides.
• Easy installation with only four screws into heavy-duty mounting straps reduces fastening points at the cabinet bottom, which simplifies layout for installers while still tying the slide assembly firmly into the cabinet structure for regular pull-out loads.
• An easy to attach handle gives a defined grasp point on the moving frame, which helps users open and close the pull-out consistently along the slide path instead of pulling on a bin rim or other less secure point.

Installation And Bottom Mount Slide Setup

The bottom mount classification means the SCB12-2-27WH secures to the cabinet floor through heavy-duty mounting straps, so installers work off the cabinet bottom as a reference plane instead of side walls, which can speed layout in standard kitchen base cabinets. Using only four screws through those mounting straps sets both slides and the frame location at once, which streamlines installation steps when fitting multiple units across a job. Full extension ball bearing slides with 1 inch over-travel position the frame slightly beyond the cabinet edge at full open, helping installers visually confirm alignment and clearances against adjacent doors or drawer fronts during setup. The easy to attach handle then provides a consistent pull point once alignment is set, supporting repeatable operation after the cabinet fronts are adjusted and the interior work is complete.

Using The SCB12-2-27WH In Cabinet Layouts

Where This Double Trash Pullout Fits Best

The Knape and Vogt SCB 11-3/8 inch chrome bottom mount waste pullout with 2-27 quart white bins positions both bins on a single FYSCB Series frame, which suits cabinet layouts that dedicate one opening to trash and recycling in a compact footprint. The bottom mount trash pullout style places all load on the cabinet floor through heavy-duty mounting straps, which works well in standard base cabinet interiors where installers want a consistent reference surface for positioning the frame front-to-back. Each white bin offers a 27 quart capacity, so two bins divide waste streams while still fitting on the full extension ball bearing slides that support the frame movement. The double trash pull-out classification directs this unit toward cabinets that need two containers moving together on one slide system rather than separate single-bin locations elsewhere in the run.

Details That Support Smooth Soft-Close Operation

The soft close heavy duty slides on the SCB12-2-27WH combine full extension ball bearing mechanisms with Soft-Close technology, so the pull-out carries loaded 27 quart bins to full open and then returns under controlled damping, which can lessen impact on cabinet joinery over repeated cycles. A 1 inch over-travel capability brings the bins slightly past the cabinet front at full extension, giving extra hand clearance above the bin rims, which can speed liner changes on job sites where access in tight kitchens is limited. The specialized wire management system that holds bins securely in place ties each bin into the chrome frame, so loads stay aligned over the slides as the soft close feature engages, helping the damping work consistently even when the bins approach the 30 lb maximum per bin rating. A 30 lb maximum per bin, not to exceed 80 lb total weight, sets a defined working range for typical household waste loads while keeping forces within the design of the FYSCB Series soft-close slide system during daily operation.

Key Questions About This FYSCB Series Trash Pullout

Select This Bottom Mount Pullout For Organized Waste

The SCB12-2-27WH bottom mount trash pull-out from Knape and Vogt combines two 27 quart white bins, heavy duty full extension ball bearing slides, and Soft-Close technology, so one cabinet opening can manage waste on a stable, quiet slide system. With bottom mount straps accepting four screws for installation and a specialized wire management system holding bins securely, the FYSCB Series layout supports repeatable operation once set in a base cabinet. When a project calls for a double trash pull-out with soft close motion and defined load ratings, this chrome frame unit aligns bin capacity, controlled travel, and straightforward floor-based mounting in a single organized assembly.